1. DL manuals
  2. Smarthome
  3. Accessories
  4. SH-D3
  5. User Manual

Smarthome SH-D3 User Manual

Manual is about: SMART LIGHTING DEVICE

Summary of SH-D3

  • Page 1

    User guide smart lighting device model: sh - d3 bkav smarthome technology company limited by bkav.

  • Page 2

    Copyright © 2014 bkav smarthome co., ltd. All rights reserved. Ugd3/v1.0/1014 w w w. S m a r t h o m e . B k a v. C o m mfr code: 893604393ugd3.

  • Page 3

    User guide smart lighting device model: sh - d3.

  • Page 4

    Warning user guide sh - d3 thank you for choosing smart lighting device sh - d3 of bkav smarthome. For selecting bkav smarthome’s products, you will get the best warranty service and installation support from our technicians. This document gives useful information during installation and usage time....

  • Page 5

    User guide sh - d3 the smart lighting device sh - d3 is the product of bkav smarthome and has been registered regarding design, utility solutions and quality certification. All violations such as copies of design and product idea are subject to the current copyright law of the socialist republic of v...

  • Page 6

    Warning user guide safety instruction sh - d3 do not use voltage which is different from the one stated in the device’s specifications. Safety instruction should be complied during the device usage. Disconnect the device’s power prior to any installation, disassembly or repair. Do not leave the devic...

  • Page 7

    Contents introduction 1. General introduction 2. Product package 3. Sensor area 4. Specifications features 1. Auto lighting 2. Forcible lighting 3. Use remote control sh - rm6 4. Light sensor 5. Preferred light level settings 6. Indicator light settings 1. Default mode 2. Switch mode settings (switch...

  • Page 8

    Introduction 1. General introduction introduction sh - d3 the smart lighting device uses pyroelectric infrared radial sensor technology. When users are in the sensor area, the light will automatically turn on. The device is integrated with light sensor and has ability to flexibly adjust the pending t...

  • Page 9

    Introduction user guide (book) sh - d3 and remote control sh - rm6 2. Product package sh - d3 set set of hook, screws, anchors and molly bolts for plaster ceiling user guide smart light device model: sh - d3 bkav smarthome technology company limited by bkav.

  • Page 10

    Notice introduction above the ceiling below the ceiling 3. Sensor area sh - d3 within the above distances, it is the best operation condition for the device. In case the device fails to detect users, please contact customer contact center..

  • Page 11

    Introduction voltage 100-240v 50/60hz load power incandescent lamp - maximum 1000w sensing range maximum 5 m fluorescent lamp - maximum 350w applicable sensor area maximum 20 m² light sensing mode adjustable day - night mode operating temperature 60ºc max dimensions (l x h) 90 x 38 mm weight 90 gram...

  • Page 12

    Features components features sh - d3 sensor turn on/off light sensor select switch type test mode (for technicians only) adjust the pending time to turn off the light when there is no motion adjust the pending time to turn off the light by switch.

  • Page 13

    Features switch s201 for adjusting sensor time switch s202 for adjusting the forcible turn-off time s203 s202 s201 sh - d3 1. Auto lighting the smart lighting device automatically turns on when detecting people in sensor area. When users leave the sensor area, the device will turn off after a preset...

  • Page 14

    Features sh - d3 3. Use remote control sh – rm6 turn on the light: when the light is off, using a switch to turn on the light, the device will turn on and automatically turn off the light when users get out of the sensor area after the automatic turn-off time (refer to time settings in page 16 & 17)...

  • Page 15

    Features sh - d3 using light sensor not using light sensor 4. Light sensor light sensor helps the device’s operation to be smarter and more power-saving. When using light sensing mode, the device automatically turns on only when environment light condition is darker than the preset one. Enable or di...

  • Page 16

    Features sh - d3 5. Adjust light level for the preferred light level setting, please take the following steps: the device is set up with default preferred light level. However, users can set up the parameter again if the default one is not suitable. 6. Indicator light indicator light is used to noti...

  • Page 17

    Features sh - d3 if the indicator light flashes every 0.5 second and off for 2 seconds in each cycle, the device is scheduled to turn off after 15 minutes. If the indicator light flashes twice every 0.5 second and off for 2 seconds in each cycle, the device is scheduled to turn off after 30 minutes. I...

  • Page 18

    S203 s203 installation light sensor off forcible turn-off 10 hours automatic turn-off 10 minutes switch type using push button switch mode using normal switch (default) automatic turn-off after 10 minutes forcible turn-off 10 hours ordinary switch mode default value actual settings 1. Device’s defau...

  • Page 19

    Forcible light turn-off for 30 minutes automatic light turn-off after 10 seconds s203 s202 s201 automatic light turn-off after 2 minutes forcible light turn-off for 60 minutes s203 s202 s201 forcible light turn-off for 45 minutes automatic light turn-off after 60 seconds s203 s202 s201 automatic lig...

  • Page 20

    Notice automatic light turn-off after 5 minutes forcible light turn-off for 2 hours s203 s202 s201 automatic light turn-off after 15 minutes forcible light turn-off for 8 hours s203 s202 s201 forcible light turn-off for 10 hours automatic light turn-off after 30 minutes s203 s202 s201 automatic ligh...

  • Page 21

    Installation sh - d3 (*) difference between normal switch and push button switch normal switch: is the type of switch mounted on electric panel to turn on and off the light. Its status does not change after interactions of switching. Push button switch: is the type of button commonly used with doorb...

  • Page 22

    Installation input line light device switch neutral 100-240v 50/60hz the back of device installation sh - d3 19 input neutral switch light device line switch 100-240v 50/60hz 100-240vac model: sh - d3 made in vietnam smart lighting device by bkav.

  • Page 23

    Notice installation switch wiring diagram 1. Wiring diagram sh - d3 the light can be replaced by other indicator devices based on users’ demand (bell, fan, alarm device, etc.). Sensor 90mm switch line neutral n 100-240v 50/60hz l 20

  • Page 24

    Installation power line light wire and switch wire 2.Installation steps sh - d3 step 1: drill 2 screw holes to mount the hook on the ceiling. (notice: avoid underground wire upon drilling as in figure 1). Step 2: connect the power line, light wire and switch wire to corresponding power connector, li...

  • Page 25

    Warning installation step 3: mount the device on the hook to fix it to the ceiling (figure 3&4). Sh - d3 all wires mentioned in step 2 should be connected properly to avoid damage to the device. During installation, the sensor surface should be kept from being scratched, which may affect the sensor’s...

  • Page 26

    Problems during usage lights turn off when there is no motion in the room. Lights do not turn on when there is enough light in the room. The following cases are not caused by device’s error problems during usage sh - d3 23.

  • Page 27

    Problems during usage lights turn on due to moving objects. The following cases are not caused by device’s error sh - d3 lights turn on due to the impact of air conditioner or heat sources (cooker, micro-wave, stove, etc.). 24.

  • Page 28

    Problems during usage sh - d3 lights turn on due to nearby powerful transmit- ting equipment. Lights turn on due to a nearby steam fan. The following cases are not caused by device’s error 25.

  • Page 29

    Problems during usage 1 2 3 no. Problem solution sh - d3 the device does not operate, the indicator light does not flash when there is a user in sensor area. The indicator light is on when detecting user but the light is not on. The device continuouly turns the light on. Use a switch to turn on and o...

  • Page 30

    Problems during usage no. Problem solution sh - d3 4 the device operates only when it is dark. The device is currently in environment light mode. To disable this mode, refer to light sensing mode settings (page 12). 27.

  • Page 31

    Contact sh - d3 28 if there is any problem related to the product, please contact customer contact center: customer contact center: (+1) 202 386 6779 email: globalproject@bkav.Com.

  • Page 32

    T h e n e w h o m e s t a n d a r d !.