Smarthome SR-25 Quick Manual - Activating Clock Battery
ACTIVATING CLOCK BATTERY
1.
2.
3.
4.
Open
the battery compartment lid.
Lift up the clock battery cover. Remove the
plastic battery insulator tab
to activate the
1.5V
alkaline battery (A
which is supplied.
Replace the clock battery (AG13) when the clock
display is faint.
When new battery is installed, it is possible that
the control buttons may malfunction and the
display may show irregular graphics.
this
happens, simply pull out the battery Atier the
LCD
digits disappear,
re-install the battery. Unit
will resume normal operation,
INSTALLING RADIO BATTERIES
1.
Open the BATTERY COMPARTMENT LID.
2. Insert
four “AA” 1.5V CUM-3
or equivalent) batteries
with correct polarity as indicated.
3. Close the lid.
RADIO OPERATION
7.
Press
the POWER button to activate the radio; a
2.
3.
4.
‘POWER” indicator will appear on the display
Slide the BAND switch to select your desired
band.
Rotate the TUNING knob until the desired
broadcast is received.
-.
Be sure the POWER button is off when the
radio is not in use.
TIMER OPERATION
I.
Each press of the TIMER button activates the
radio in 15 minute increments (
15, 30, 45, 60 ).
The Radio/Timer can be deactivated by pressing
the button once after 60 appears in the display,
or by pressing the POWER button on the side.