SmartLabs SML-5112W User Manual - page 6
105318, Russia, Moscow, Shcherbakovskaya str., b. 3. Ph.: (495)645-44-56 page
6
of
13
http://www.smartlabs.tv
CONFIDENTIAL
Move through menu items
OK
Confirm the selection, pause, resume playback
Jump to the main menu
Search by content name, actors, television channels and TV shows
In the mode of watching TV/movie
– return to the previously watched
channel
CH-
CH+
Switch channels
0...9
Numeric keys
*You can control TV after the RC setup
The universal remote control can simultaneously work with multiple devices.
To pair the IR remote control with a TV set, you need to perform simple configuring that
will not take much of your time. The RC can be set up automatically as well as manually
using the TV manufacturer’s number or code.
You do not need to perform any special configuring to pair the RC with the TV. For more
information see the section RC Setup.
6.2 Automatic Setup
1. Turn your TV on.
2. Point the remote control at your TV. Press and hold TV and OK buttons for 3 seconds.
The LED on the remote control will flash twice and the remote control will switch to
setup mode. If in the automatic search mode no button is pressed, the remote control
exits the mode.
3. Press CH- or CH+ button once. The remote control will automatically send a code to
the TV every 1.5 seconds. When the TV is going to turn off, quickly press OK to save
the code. After that the LED blinks twice and the remote control exits the mode.
4. You can change the search direction, using the buttons CH- and CH+. To
stop/resume the search, click OK.
6.3 Setting up remote control by using manufacturer's number
1. Turn your TV on.
2. Point the remote control at your TV. Press and hold for three seconds the TV button
and the button corresponding to the manufacturer’s number from the table (see. Table