15-port usb 2.0 hi-power charging hub user’s manual usb-1524bc.
1 table of contents introduction ..............................................................................................................................................2 features .....................................................................................................................
2 introduction the hi-power charging hub is a solution for quick charging or sync up to 15 ipads, iphones ipods and usb charging devices operating simultaneously; this is a perfect tool to effectively perform sync/charge mode switching. Also is ideal for large capacity usb station in-house that enab...
3 cautions 1. End user may extend another unit of usb 2.0 15-port charging hub. (it allows connecting or charging maximum up to 30 usb devices simultaneously.) 2. The specific cable for ipad, tablet isn’t included in package accessory. Please check with your distributor regarding of using appropriat...
4 5. Power switch user may switch power to on / off. 6. Power jack to use with power adaptor provided. 7. 3.5mm jack for link connection (non-audio function) it is available to connect with another unit for managing power, sync/charge functions. 8. Usb port for extending the 2 nd unit it is availabl...
5 connection (1) to turn off the power switch. (2) plug the power adaptor to the unit’s power jack. (3) put the plug of power adaptor into the wall outlet . (4) turn on the power switch . (5) using the usb a/m to b/m cable provided and connects the usb b end on the unit. (6) using the usb a end and ...
6 (8) to use usb cable and connects with tablet or usb devices to the usb ports (front panel). Charging & syncing: please follow below ways for charging or syncing usb devices. (1) follows the step of connection with host computer, and connects host computer with the unit. To secure check, the whole...
7 (6) lcm display symbol description port no. Selected time to auto scan the charging status output current of port selected while the hub works at sync mode; the lcm display will power down in 60 seconds if no charging devices connected. Once the charging devices connected, it will turn on the digi...
8 [ for ios update ] user may not perform the ipad update when ipad is connected. You must update ios on ipad one after another. Daisy-chain (cascade) connection the 15-port charging hub can extend another unit for daisychain (cascade) connection, the 2 nd unit can sync simultaneously as well. Maxim...
9 (5) turn on the power switch of the 2 nd unit. (6) use the usb cable provided and connects both usb ports of the 1 st and 2 nd units. (7) use the audio cable provided and connects the jack to next level of the 1 st unit and the jack from pre-level of the 2 nd unit. Additional info: the 15-port uni...
10 regulatory compliance disclaimer information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profi...
