Smartlink scr2000e smart card reader installation manual.
A: hardware installation connect to an available ps/2 connector of your pc. Then connect your ps/2 mouse/keyboard to the extension slot at the other side of the connector if necessary. Connect to an available 9-pin com port..
B. Driver installation in windows 98 environment. B-1 after connecting smartlink scr2000e, power your pc on, windows system will find the new hardware and will guide you to install the device driver. (as shown in the picture) click “ next > ” to continue. B-2 select “search for the best driver for y...
B-3 select “floppy disk drives” option. And insert the installation diskette into an available floppy disk drive. Click “next >” to continue. B-4 windows will find the driver for “smartlink scr2000e smart card reader”. Click “ next > ” to continue..
B-5 windows has finished the installation of the driver. Click “finish” to complete..
