SMARTLUX MAG-080-120-6091 User Manual - page 6
Page 6 of 8
Temporarily freezing images
To freeze an image, press the photo button (2) briefly. The frozen image
will be shown on the display. You can further edit it by using the
magnification button (3) and the contrast button (5). If you press the photo
button (2) again briefly, you will return to live image mode.
Saving images permanently
Once you have frozen an image, you can save it permanently by pressing
and holding the photo button (2)
for at least 3 seconds. The image
will be saved at position 1 in the smartlux DIGITAL memory. The memory
location is displayed using a diskette symbol at the top screen border.
Images already saved are moved up by one position. Up to 20 images can
be permanently saved. Once the maximum memory capacity has been
reached, a red diskette symbol is diplayed at the top screen border. In this
case, you should delete some saved images in order to create more memory
capacity (see managing saved images).
If you switch the smartlux DIGITAL on and there is no memory capacity
available for images, this will be shown on the start screen top border by a
red, crossed-out diskette symbol.
Image has been saved in Position 1 of 20 (example).
Image memory is full (symbol is then shown red). Images must be
deleted before you can save new images.
Display when the smartlux DIGITAL is swtiched on and the image
memory is full. No more images can be saved.
Managing saved images
You can manage your saved images in photo mode. Hold the photo button
(2) pressed for 3 seconds to change from live image mode to the image
saved in Position 1. If you continue to hold the photo button (2) pressed,
the images saved in Positions 2 to 20 will be displayed at 3 second intervals.
Release the photo button (2) once the image you wish to manage is
displayed.