Smartparts 10.4 User Manual - Getting Started
Getting started
To begin using your digital picture frame right away, follow these
simple steps.
1. Connect the AC power adapter to the frame and plug the
adapter into an electrical outlet. (100-240 V, 50-60Hz)
2. Insert a memory card into the appropriate card slot
on the side of the frame.
3. Turn the frame on by pressing the Power switch.
4. A slide show will begin automatically. To stop the slide show
press Exit.
Internal Memory and Memory
Card Slots
Your digital picture frame includes 128MB of internal memory along
with card slots to insert; Compact Flash (CF), Secure Digital (SD),
Multimedia Card (MMC), Memory Stick (MS) and xD memory cards.
There is also a mini USB port used to connect the frame to a
computer using the USB cable supplied with the frame. To use USB
flash drives connect the USB flash drive to one end of the supplied
OTG USB cable and the other end of the cable to the mini USB
port on the frame.
To select from various types of memory, press Exit until the memory
devices are highlighted at the bottom of the screen. Then use the
left and right arrow buttons to select the desired memory type.
Press Enter to access the selected memory type.
4