SmartPool Pool Eye PE24 Installation And Operation Manual

Manual is about: Pool Eye

Summary of Pool Eye PE24

  • Page 1

    1 pe24 manual version 1.0 ® installation and operation manual model: pe24 table of contents important safety information..............................................2 list of components ............................................................3 installation .........................................

  • Page 2

    2 pe24 manual version 1.0 important safety information warning: ! Read all instructions prior to installing or operating this device. Failure to follow the instructions may result in injury or death. This device is not intended to replace any other safety consideration: that is, adult supervision, l...

  • Page 3: Item

    3 pe24 manual version 1.0 list of components item description qty a alarm body w/ tether string 1 b magnetic key 1 c tether clip 1 d alarm stand 1 e remote receiver 1 f remote ac power adaptor 1 a b c d e f.

  • Page 4

    4 pe24 manual version 1.0 installation positioning of the alarm warning: every pool is different. The alarm must be tested immediately upon installation to ensure the positioning of the alarm fits its specific environment. Improper positioning of the alarm or return fitting may result in under-perfo...

  • Page 5

    5 pe24 manual version 1.0 installing the batteries two 9v batteries are required to operate the alarm. One battery will be installing the floating alarm and one battery will be installing in the remote receiver as a backup in a case where power is lost to the outlet. Remote receiver 1)remove the bat...

  • Page 6

    6 pe24 manual version 1.0 mounting the alarm important: do not attach the tether string to a pool ladder, a handle or any other object in or near the pool. Note: the tether clip is supplied with an adhesive backing which can be applied to smooth, clean surfaces such as metal or plastic. Abrasive or ...

  • Page 7

    7 pe24 manual version 1.0 2)the light on the alarm will flash green once approximately every 10 seconds indicating the alarm is armed. 3)ensure the remote receiver is within 100 linear feet (30 m) of the pool alarm and is positioned where it can be heard from anywhere in the house. Ensure the 9v bat...

  • Page 8

    8 pe24 manual version 1.0 testing the alarm to test the alarm, you can make a simple device that will simulate the size and weight of a young child. See figure 11 and fig 12. The materials needed are: • (4) 1.5l bottles • duct tape • 6 ft of strong string 1)fill the four bottles with water. 2)use th...

  • Page 9

    9 pe24 manual version 1.0 winterization 1)remove the alarm from the pool and place on the alarm stand. 2)release the tether string from the clip. 3)remove the batteries from the remote and alarm. 4)store the remote, ac adapter and alarm in an area that remains above freezing temperatures. Ensure the...

  • Page 10: 1 Year Limited Warranty

    10 pe24 manual version 1.0 1 year limited warranty one year limited warranty from date of original purchase for manufacturing defects under normal and reasonable use, and subject to the maintenance requirements and installation guidelines set forth in the product instruction manual. This warranty is...