User's guide uninterruptible power supply 400va - 800va sbp series models: s b p -t b f u p s s e ri e s sbp0400tbf-6u,sbp0600tbf-6u, sbp0800tbf-6u sbp0400tbf-6u-lcd,sbp0600tbf-6u-lcd, sbp0800tbf-6u-lcd.
1 this manual contains important instructions for models sbp0400tbf-6u, sbp0600tbf-6u, sbp0800tbf-6u, sbp0400tbf-6u-lcd, sbp0600tbf-6u-lcd, sbp0800tbf-6u-lcd that should be followed during installation and maintenance of the ups and batteries. Safety caution! Maximum output power during reserve mode...
2 ce manuel contient des instructions importantes pour les modèles sbp0400tbf-6u, sbp0600tbf-6u, sbp0800tbf-6u, sbp0400tbf-6u-lcd, sbp0600tbf-6u-lcd, sbp0800tbf-6u-lcd qui doivent être suivies lors de l'installation et de la maintenance de l'onduleur et des batteries. Sécurité attention! Puissance d...
3 system description front panel back panel for led & lcd lcd led power switch power switch led indicators ac mode: green lighting battery mode: green flashing lcd back-light usb port modem/phone/ network protection 2 tbf™ power conditioned outlets 4 battery + conditioned outlets tbf™ power ac input...
Installation and operation installing the ups is as easy as following the steps shown. Be aware the power switch must be kept in the “on” position, otherwise, the ups will be disabled and your equipment will not be protected during a power failure． 1. Inspection remove the ups from its packaging and...
Incoming internet line computer connection connect one computer-related device into each of the power receptacles supplied on the back of the ups (maximum of three devices). Modem/phone line connection plug incoming internet line into the “in” socket at the back of the ups. Use one more internet lin...
6 tun on/off the ups will be turned on automatically at first plug-in. At this moment, press the power switch lightly to turn off the ups. To turn on the ups again, just simply press power switch again. Please do not punch it to extend the life of the power switch. Dc start function dc start functio...
Battery removal (sbp400-800) before replacing the battery, turn off the ups and unplug the ups cord from the wall outlet. Follow chart 1 to remove the screw located on the bottom of the front panel and then open the front cover. After removing the front cover, follow chart 2 to remove partition by r...
8 smartpower systems provides a complete line of software solutions for standalone and networked computers, including snmp support. Features • automatic save and shutdown for unattended pcs • reboot/shutdown scheduling • self test scheduling • power condition analysis • online display of input / out...
9 troubleshooting symptom possible cause solution if abnormal situations occur that are not listed above, please call customer service immediately. No led or no lcd display on the front panel 1. Missing battery 2. Battery defect 3. Power switch is not pressed 1. Charge battery up to 8 hours 2. Repla...
10 specifications - 400va - 800va specifications and features subject to change without notice. Environment conformance audible noise ambient operation warranty safety 0-90% humidity non-condensing 0-40 deg c cul, ul two years for the sbp unit. Four years pro-rated battery warranty. $25,000 connecte...
11 limited product warranty we warrant this product to be free from defects in material and workman- ship for 2 years. The battery has a 4 year pro-rated warranty. If a product proves to be defective in material or workmanship during the warranty period, we will at our sole option repair or replace ...
P.N.16002100 rev.07/14 1760 stebbins dr. • houston, tx 77043 1-800-882-8285 • url:www.Smartpowersystems.Com email:support@smartpowersystems.Com.
