Quick start guide sr360n this quick start guide shows you how to set up and begin using your new gateway.
Power lan 1-4 wlan wps dsl internet dsl sync in progress dsl sync acquired and gateway online gateway online and data transfer in progress ip connection failure wi-fi enabled on modem pc / network activity / data transfer wps setup procedure in progress wps connection completed successfully : on : o...
Installation installation connect one end of the supplied dsl cable to the port labeled dsl on the gateway. Connect the other end of the supplied dsl cable to the dsl wall jack installed by your provider. For all other devices, connect the end of the ethernet cable from that device into any of the l...
Installation installation 1 2 3 4 5.
Quick gateway configuration quick gateway configuration logging in to your gateway: in order to change the settings on your gateway, you must first login. Ensure that you have completed the above physical installation steps before you begin. Open your internet browser application and type 192.168.1....
Quick gateway configuration quick gateway configuration the following screen appears. Wait while the gateway automatically connects to your service provider. The following screen appears. Wait while the gateway automatically connects to your service provider. When the connection is complete, ok will...
4 quick gateway configuration quick gateway configuration manual configuration of the wan: in the event that the automatic connect process is unsuccessful, refer to the wan connection setup chapter in the user guide for this gateway to manually establish a connection. Manual configuration of the wan...
1 2 3 quick gateway configuration quick gateway configuration wifi setup two methods are available for wifi setup. Complete these first three steps then the remaining steps for the specific method you desire. 1. From the left navigation bar, click wireless / basic. 2. Check the enable wireless check...
Quick gateway configuration quick gateway configuration wps method if the device you wish to connect to the internet via your smartrg gateway supports wps secure wifi connection method, you may follow these steps. 1. From the left navigation bar, click wireless / security 2. Select the drop-down men...
Quick gateway configuration quick gateway configuration manual method set up your gateway’s parameters first, then: 1. From the left navigation bar, select wireless / security and scroll down to the manual setup ap section. 2. If your gateway supports multiple wireless networks, select the ssid of t...
Additional support additional support www.Smartrg.Com www.Smartrg.Com if you require further instructions, please contact smartrg support at support@smartrg.Com or contact your smartrg sales engineer. If you require further instructions, please contact smartrg support at support@smartrg.Com or conta...
Record your sr360n wifi settings record your sr360n wifi settings preset wireless settings on your router: wifi network name (ssid) network key (password) if you change the preset wireless settings: wifi network name (ssid) network key (password) preset wireless settings on your router: wifi network...
