- DL manuals
- Smartspeaker
- Speakers
- A1
- Owner's manual
Smartspeaker A1 Owner's manual
Summary of A1
Page 1
Owner’s manual the smartspeaker the portable wireless smartspeaker (a1) the wireless smartspeaker (a2).
Page 2
Unit 5 leestone road manchester m22 4rn www.Thesmartspeaker.Com features, specifications and appearance are subject to change without notice. Airplay, apple, mac, iphone, ipod, ipod nano, ipod classic, itunes and ipod touch are trademarks of apple inc., registered in the u.S. And other countries. Ip...
Page 3
Table of contents contents page introduction 4 getting to know your smartspeaker 5 setting up connected mode – ios devices 6 setting up connected mode – any device 7 setting up wi-fi direct mode 8 using your smartspeaker 9 using more than one smartspeaker 10 firmware upgrade procedure 11 system rese...
Page 4
Introduction the smartspeaker is a totally wireless and totally portable audio system - it can play your audio and media anywhere around the house and garden direct from your ios device or itunes using your existing wi-fi network. The smartspeaker works with apple’s airplay technology. It is able to...
Page 5
Wi-fi led status descriptions green connected to a wireless network. Red, flashing slowly not connected to a network. Check signal strength and network configuration. Red, flashing quickly speaker is starting up. If this does not change, there may be a problem, see troubleshooting. Red / green flash...
Page 6
Setting up connected mode – ios devices before you can use connected mode, you need to connect the smartspeaker to your wireless network. Use the methods on this page if you want to use an apple iphone, ipad, or ipod touch to set up the speaker. Once your speaker is set up in connected mode, you can...
Page 7
Setting up connected mode – any device before you can use connected mode, you need to connect the smartspeaker to your wireless network. Use the methods on this page if you want to use an android phone, desktop computer (mac or windows), or other network capable device. Note: whilst you can complete...
Page 8
Setting up wi-fi direct mode your smartspeaker will work in wi-fi direct mode straight out of the box. To do this, simply switch the speaker to wi-fi direct mode by briefly pressing the power/mode button twice (from connected mode). The wi-fi led will turn orange. Search for and connect to the “wi-f...
Page 9
Using your smartspeaker the methods on this page assume that your smartspeaker is connected to your wireless network in connected mode. You can use the same methods in wi-fi direct mode by first switching the smartspeaker to wi-fi direct mode. Note: when you are connected to the smartspeaker using w...
Page 10
Using more than one smartspeaker you can use multiple speakers to listen to the same source from itunes on a computer which is wirelessly connected to the same network as all the speakers. Currently, the ipod or music function on the ios device only supports one speaker at a time. It is possible to ...
Page 11
Firmware upgrade procedure occasionally, firmware updates will be released. Check thesmartspeaker.Com and download any available update to your computer, then follow the instructions below to install the update. The update file itself has the file extension “.Fw”, if you have downloaded the file in ...
Page 12
Troubleshooting guide - continued problem possible solutions unable to load to the speaker configuration page ● try disconnecting from any other networks your computer is connected to whilst loading the page, including wired networks. ● try disconnecting from the speaker network and reconnecting to ...
Page 13
System reset – troubleshooting guide warning: this factory reset procedure will restore all the settings on the smartspeaker to their defaults. It will erase any network settings you have entered in connected mode, and remove the security settings from the wi-fi direct mode. You will need to set up ...
Page 14
Looking after your smartspeaker cleaning – the smartspeaker should be cleaned only with a dry cloth. Solvents or other cleaning chemicals should not be used. Objects and liquid entry – care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on ...
Page 15
We hereby declare that this smartspeaker is in compliance with the essential requirements and other relevant provisions of the directive 1999/5/ec., in conformity with the relevant standards. This symbol on the product or on its packaging indicates that this product should not be treated as househol...