1 smartview nvrs quick installation guide isc-nvr2316-t / isc-nvr2532-t isc-nvr2532-u /sc-nvr2532-r isc-nvr2532-a / isc-nvr2532-d version 1.5 copyright © ingrasys technology inc. All rights reserved..
2 1. How to start? Thank you for using smartview nvr. Following steps are for bringing on this system from storage setting to starting recording and live viewing. Details will be described in following contents. Hardware preinstall & power on raid setting (for isc-nvr2532-r/a/d) windows partition se...
3 2. Package contents following items should be included in your smartview nvr’s accessory content. If any component is missing in your smartview nvr package, please contact ingrasys technology inc. Model no. Isc-nvr2316-t isc-nvr2532-t isc-nvr2532-u dvd-rom power cord hdd srews hdd tray keys rj45 t...
4 model no. Isc-nvr2532-r isc-nvr2532-a isc-nvr2532-d dvd-rom power code hdd srews slide rail slide installation guide rackmount screw set raid card driver raid card quick intallation guide.
5 3. Pre-install notice before installing smartview nvr, please make sure the following items are ready. Network connection well-configured ip camera(s) a computer monitor with vga interface a usb mouse 1~24 3.5” hard disk(s) a screwdriver.
6 4. Hardware interface 4.1 nvr2316-t a power switch b power led c reset button d system read/write led e front cover for 4 x 3.5” lockable hdd trays f 2 x usb 2.0 g power socket h lan i lan j vga k 4 x usb 2.0 l com m e-sata.
7 4.2 nvr2532-t a power switch b power led c reset button d system read/write led e front cover for 4 x 3.5” lockable hdd trays f 2 x usb 2.0 g power socket h audio jack i com1 j com2 k vga l dvi-d m hdmi n lan o lan p 4 x usb 2.0
8 4.3 nvr2532-u a power switch b alarm mute button c fan failed led d power led e 4 x 3.5” hdd tray f power socket g audio jack h com1 i com2 j vga k dvi-d l hdmi m lan n lan o 4 x usb 2.0
9 4.4 nvr2532-r / nvr2532-a (redundant psu) a power switch b system reset button c alarm mute button d system read/write led e power led f system alarm led g lan1 led h lan2 led i 2 x usb 2.0 j 16 x 3.5” hdd tray k power socket l audio jack m com1 n com2 o vga p dvi-d q hdmi r lan s lan t 4 x usb 2....
10 4.5 nvr2532-d a power button b system reset button c alarm mute button d power led e system alarm led f lan1 led g lan2 led h 2 x usb 2.0 i 24 x 3.5” hdd tray j power socket k audio jack l com1 m com2 n vga o dvi-d p hdmi q lan r lan s 4 x usb 2.0
11 5. Sysguard to prevent from any exception and keep high performance for the smartview nvr, the operation system is built with microsoft window embedded 7 and the system drive (drive c) is protected with fbwf (file base write filter). If you want to change any settings of windows operating system ...
12 (1) you should disable the sysguard before changing the system settings. After system start up, system will pop out a warning message automatically, please click no to disable the sysguard. (2) close installation wizard and smartview for changing windows operation system settings. Notice:default ...
13 (3) double click on the shortcut of system desktop and click yes to enable the sysguard. System will be restarted automatically. ※ if your smartview is already running and sysguard is enabled, you may open the sysguard program and select disable the sysguard function and click ok. Then, click yes...
14 6. Raid settings notice : raid settings only applied for nvr2532-r / nvr2532-a / nvr2532-d, if you are using nvr2316-t/k or nvr2532-t, please skip this chapter directly. 6.1 log-in megaraid storage manager (1) insert all hard drives to the trays. (2) power on the system. (3) please disable the sy...
15 6.2 raid configuration you will enter the main console of megaraid storage manager . (1) select to physical tab and make sure every hard disks you installed in your smartview nvr’s front slots are all “unconfigured good” (like ) (2) right click on lsi megaraid sas 9260-4i ( ) and choose create vi...
16 (4) create drive group – drive group and virtual drive settings will pop up, please select raid 5 ( ), then click next ( ) button to create raid. (5) create virtual drive - summary window will pop up to confirm all settings are correct, and then click finish and ok to complete settings..
17 (6) please make sure all hdd you configured are online ( ). (7) these hard drives will be regarded as one single disk in windows 7 operation system. (8) now you may go to initialize the disk and create new volumes through right click mouse at windows computer and select on manage disk manageme...
18 7. Add storage smartview nvr is capable to install up to 24 hard drives as recording storages. To keep the system working normally, you should operate steps as the following for adding recording storages: notice:if you are using nvr2532-r/a/d and your raid setting has been just done, please jump ...
19 8. Installation wizard after adding storages, once you are first using smartview, the installation wizard will pop up automatically to finish basic nvr setting and adding cameras. And then you will enter smartview main console to start your enjoyable surveillance experience! (1) system setting sn...
20 (2) cameras discovery and adding users are able to complete most basic and important settings on adding a camera. By cameras discovery ,users can find all cameras in local network and then complete basic setting easily. Discovery:to start the cameras discovery procedure. Recording: to turn on / o...