Marine revolution smartwave sw4800 owner’s manual page 1 owner’s manual smartwave sw4800 series marine revolution ltd www.Marinerevolution.Com.
Marine revolution smartwave sw4800 owner’s manual page 2 table of contents table of contents .......................................................................................................................... 2 general introduction ................................................................
Marine revolution smartwave sw4800 owner’s manual page 3 general introduction congratulations on your purchase of a marine revolution smartwave boat. This manual has been compiled to help you operate your craft with safety and pleasure. It contains details of the craft; the equipment supplied or fit...
Marine revolution smartwave sw4800 owner’s manual page 4 positioning weight at the stern or bow of the boat is this may lead to swamping or dangerous handling characteristics. Man-overboard prevention and recovery (bs en iso 15085) re entry at the stern of the boat is recommended if the vessel is in...
Marine revolution smartwave sw4800 owner’s manual page 5 boat design the rotationally moulded virgin grade polyethylene construction of this craft is extremely strong, it will not rot, rust, corrode or split. It is temperature stable and uv stabilized. The hull is manufactured as one piece and twin ...
Marine revolution smartwave sw4800 owner’s manual page 6 (bs en iso 11592) do not operate this craft with an engine of rated power larger than that posted on the capacity label of the craft. Engine trim: using the power trim unit or the manual trim pin setting, ensure the boat is trimmed correctly a...
Marine revolution smartwave sw4800 owner’s manual page 7 if your boat is kept on the water it is beneficial to periodically slip your boat in order to inspect the hull and any fittings, equipment, etc. Do not use the tilt support lever or rely on the hydraulic tilt to support the outboard when trail...
Marine revolution smartwave sw4800 owner’s manual page 8 engine cooling system ensure water is coming out of the “water check port” every time the engine is started. If no water is coming out the nozzle, stop the engine immediately and inspect of blockages/faults. Refer to manufacturer’s manual supp...
Marine revolution smartwave sw4800 owner’s manual page 9 ensure both drain bungs have been secured before launching the boat steering system your smartwave sw 4800 may be fitted with a cable or hydraulic steering system. The steering shaft running through the engine tilt tube should be lubricated pe...
Marine revolution smartwave sw4800 owner’s manual page 10 • make sure you have a first aid kit and know how to use it. Seasickness seasickness strikes down many a sailor; even a hardened seafarer will feel the effects at times. Its effects are dangerous if the crew becomes too incapacitated to maint...
Marine revolution smartwave sw4800 owner’s manual page 11 your boat is uv stabilized and uses only stainless steel hardware, so it will stand up well to the elements for many years. To maximize the life of your boat we recommend the following: • protect your boat with a storage cover. • if your boat...
Marine revolution smartwave sw4800 owner’s manual page 12 identification details identification; craft identification as per en iso 10087 hin number (small craft – hull identification-coding system) ……………………………………………………………… builder’s plate as per iso 14945 serial number (small craft- builder’s plate...
