SmartWitness CVR500 User Manual - page 9
SETTING THE TIME & DATE
The time and date settings can be set using a PC or Mac. The time and date will
be saved in the recorded files, and will be shown when playing back. Once set,
the time and date will be saved forever until the time and date are re-set or if
the Pen Camcorder is formatted/reset.
To set the Time and Date:
1. Insert the CD and locate the folder ‘How to set the recording time’. Open
the file called userconfig.txt in the default text edit application.
2. Set the time and date directly to the file by typing in the relevant digits in the
format: ‘YYYY-MM-DD HH:MM:SS’ as shown below.
e.g Time and Date set to 25th December 2010, 8.45am
3. Insert the Pen Camcorder to your computer and save the userconfig.txt file
to the root of the pen’s Flash Drive.
4. Remove the Flash drive from your computer, turn the pen camera off, then
turn it on. The time and date are now set.
NOTE:
After the Time and Date are set, the userconfig.txt file will be automatically
removed from the pen’s Flash drive.
2010-12-25 08:45:00