SmartWitness CVR600 User Manual - page 2
PRODUCT DESCRIPTION
The Smart Witness Recording Spy Camera keyfob looks like a car alarm or similar keyfob, but has
a hidden colour camera, microphone and recorder built inside it.
Uses Micro SD cards (up to 8GB) for
recording.
Rechargeable battery for 1 to 2 hours
continuous use.
Wide Angle Lens and good low light
performance.
Connect to USB on Windows/OSX PCs for
easy data transfer.
Recordings are Time/Date stamped.
Charges via USB.
FEATURES
CAMERA CONTENTS
USB Port
Camera
ON/OFF switch
Light
Indicator
Video/Camera
Pinplug (microphone)
Reset
PARTS DESCRIPTION
Recording Spy Camera
Keyfob
USB cable
CAMERA OPERATION
Video mode:
Power the camera on by pressing and holding the OFF/ON button until a yellow light is switched on.
Press and hold the Video/Camera button until the yellow indicator light flashes three (3) times.
To stop and save the recording, click the Video/Camera button to turn the yellow light on.
Press and hold the OFF/ON button to switch the camera off.
Camera mode:
Power the camera on by pressing and holding the OFF/ON button until a yellow light is switched
on. Click the Video/Camera button until the yellow light flashes once. You can now start taking
photos. Press and hold the OFF/ON button to switch the camera off.
Light indicators in Camera mode:
Yellow Light: Indicates unit is charging. Light turns off when unit is fully charged.
Slow Flashing Yellow Light: USB File reading and writing:
Light indicators in Video mode:
Yellow Light: Indicates unit is in stand-by mode.
Yellow Light: Indicates memory card is full.
Slow Flashing Yellow Light: Indicates unit has low Battery.
Time Setting:
The camera can adjust it’s time display function on its own to match the time of the recording.
Follow the steps below to set the time:
1.Insert the SD card into the camera. Power the camera on by pressing and holding the OFF/ON
created in the root directory of the SD card.
2.Connect the camera to the computer using the USB cable provided.
You should keep the format the same as the default time:
camera software will be set to the computer system’s time.
2011-05-01 23:59:59