Www.Smartwitness.Com smartwitness svc1080-lcs installation guide v.1.2 warning: smartwitness installations should be performed by a qualified individual or installation professional only. Working with a vehicle's power system can be dangerous to both you and your vehicle. This installation is intend...
Www.Smartwitness.Com 1. Overview: the svc1080-lcs is a 1080p full hd accident camera for commercial vehicles. Svc1080-lcs features an integrated 3-axis g-sensor, microphone, integrated gps receiver, permanent power cable, and a tamper-resistant design. Sdhc storage, up to 64gb. Mac and pc analysis s...
Www.Smartwitness.Com benefits : the svc1080-lcs features a full hd (1080p), 170° lens to provide a comprehensive view of any incident. The lcs will record exactly what happened before, during and after an incident. It does this by recording the following information: drivers view of the road, vehicl...
Www.Smartwitness.Com 2. Svc1080-lcs overview a. Front b. Rear windshield mount + adhesive tape camera lens tamper resistant locking cover panic button status leds g-sensor calibration button power cable.
Www.Smartwitness.Com 3. Installation steps 1. Use the provided key to remove the locking cover. 2. After unlocking the cover, insert the sd card into the slot as shown. Make sure the sd card is inserted all the way and “clicks” into place. 3. Adjust the bracket angle by pulling the bracket away from...
Www.Smartwitness.Com 4. Attach the provided 3m adhesive pad to the svc1080-lcs bracket and press firmly. 5. Secure the svc1080-lcs to the windscreen behind the rear view mirror, below the a1 line. The camera lens should be as high on the windshield as possible, but still within the windshield wiper ...
Www.Smartwitness.Com 4. Svc1080-lcs power connection: 1. First, connect the power lead cable from the camera to the power extension by connecting the white molex connectors, as seen below. 2. Wiring diagram power (ign+) ground (bat-) remote sw+ remote sw - alarm out 1 alarm out 2 3. Optional remote ...
Www.Smartwitness.Com 5. Final steps after installation of the svc1080-lcs into the vehicle, you can turn on vehicle ignition and the camera will power on. There will be a sequence of blue/red led lights cycling during boot process. Once boot up is complete. There will be a solid blue light. This mea...
Www.Smartwitness.Com troubleshooting the svc1080-lcs does not power up (blue/red leds do not turn on) o please check the power and ground connections to the vehicle. O use a multimeter to ensure the camera is receiving proper voltage o if connecting to fuse panel, check the vehicle fuse o check the ...
