- DL manuals
- SmartWitness
- Data Loggers
- SVC400GPS
- User manual
SmartWitness SVC400GPS User manual
Summary of SVC400GPS
Page 1
Svc400gps thank you for purchasing this journey recorder. please ensure that you read and understand this user guide and use it before connecting and installing this recorder. please store the user guide in an easily accessible location. Ver 1.0 user guide 4 camera vehicle journey recorder.
Page 2: Fcc
3 fcc information to the user this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment g...
Page 3: Caution
Caution damages due to production malfunction, loss of data, or other damages occurring while using this product shall not be the responsibility of the manufacturer. Although the product is a device used for recording videos, the product may not save all videos in the case of a malfunction. In the c...
Page 4: Gps Reception
Gps reception 1. Activate the product in an area without large buildings to improve gps reception. 2. The temperature range for optimum operation of the gps receiver in your car is -10 ~ 50°c. 1. When using the product for the first time or after a long period (more than three days), it may take a l...
Page 5: Contents
Contents 5 wire splice clips (x5) sticker for mounting (double-sided 3m tape) smart witness svc400gps receiver & recording unit sd memory card (* dependent on model purchased. Sd card includes analysis software) velcro sticker smart witness svc400 gps antenna unit remote controller av output cable p...
Page 6: Identifying Parts
Identifying parts svc400gps journey recorder rear 7 speaker internal microphone camera input 1, 2 remote control input gps input power input & alarm (car signal) input rear view camera 4 input front sd slot sd door audio/video output external mic input camera 3 input.
Page 7: Identifying Parts
Identifying parts remote controller 8 record led (blue) overwrite led (red) record button play button snap shot button av output cable video output 1 video output 2 audio output.
Page 8: Identifying Parts
9 identifying parts power & car signal input fuse 250v 3a power (+) (red) ground (black) alarm 1 (blue) alarm3 (yellow) alarm 2 (green) car pulse (speed) (white).
Page 9: Function (Main Unit)
Function (main unit) automatic start turn on the vehicle’s power and the svc400gps will be automatically started. (use the power cable provided). Event recording the event recording function will be started automatically by the alarm inputs (1 to 3) or by the g-sensor level. Panic recording the pani...
Page 10: Function (Main Unit)
Built-in power backup if power to the unit is interrupted the svc400gps creates the last file using its internal battery. Blue led (recording) the blue led shows the power is on (it will flash during event recording) red led (warning) the red led will turn on when there is video loss or the system h...
Page 11: Operation
Operation begin recording 1. Make sure that the power cable is properly connected and then turn on the cars power. 2. The blue led & red led will turn on and begin to flash slowly and simultaneously. The blue led will then remain on by itself, illustrating that the svc4000gps is ready for recording....
Page 12: Operation
Operation 13 press the [play] button and the information osd will show up on the monitor as below: to change the live display channel, press [record] button. the information osd will be turned off automatically after 30 seconds. to turn off the live view, press [play] button or [stop] button. ...
Page 13: Operation
Operation g-sensor calibration 14 g-sensor calibration is needed after installing the svc400gps. This allows it to determine how it has been installed so that it accurately records the journey direction. Press and hold the [play] & [stop] buttons together and then turn on the power. The g-sensor cal...
Page 14: Operation
Operation panic record (by the panic button) 15 begin recording automatically by pressing the record button. Recording will start with one short ‘beep’ sound and the blue led will be flash during the recording. The svc400gps will not make a separate event file during the continuous recording. It wil...
Page 15: Operation
Operation playback 16 press and hold the [ play] button for more than 2 seconds. The last recorded file will be played back on the screen. Playback control panel playback controls: channel change: press the [record] button move to the previous file: press and hold the [stop] & [play] button mo...
Page 16: Software User Guide
Software user guide svc400 – vehicle journey recorder analysis software 17 pc system requirement if the pc does not meet the minimum system requirement, the smartwitness software may not function properly. Os windows 2000, windows xp windows vista, windows 7 cpu pentium4 2.6ghz or higher ram 512mb o...
Page 17: Software Installation
18 software installation smart witness analysis software is on the provided sd card. 1. Connect the sd card into your pc (if your computer does not have and sd card slot use a usb sd card reader) and open “my computer” 2. Right- click the “driverec1” drive and select open 3. Double click ‘pcsw’ fold...
Page 18: Connect Sd Memory Card
Connect sd memory card connect sd memory card in to the sd card reader run ‘smart witness’ select file and then click ‘select data folder’ or click the open button 19 [open] button select sd memory card folder at the folder select window. Or.
Page 19
Smart witness analysis software 20 the ‘date formats’ and ‘speed unit’ will be set automatically according to the pc windows setting. However it can be changed within this setting menu. To see the better quality playback picture on your pc, check the “deblocking” box. To setup the smart witness anal...
Page 20: Select File For Playback
Select file for playback check the file from the list using a mouse or click the ‘all’ button and then click the ‘load’ button. 21 the event file list (recorded by a triggered g-sensor or alarm1-3) the panic file list (recorded by pressing the [record] button the continuous recording file list. Th...
Page 21: Playback Screen
Playback screen 22 g-sensor data ud: up/down direction fr: front/rear direction lr: left/right direction [nor]: normal recording [g-sensor]: event recording display frame/total number of frames playback position indicator event data in the playlist check box for continuous playback this button is en...
Page 22: Playback
Playback speed ch1 ch2 ch3 volume drag & move the white line to move the playback position. Single view (ch1, ch2, ch3) quad view playback buttons pause next image previous image x0.5, 1 play x2, 4, 8, 16 fast forward x0.5, 1 reverse x2, 4, 8, 16 fast reverse 4x4 multi view (thumb-nail function) zoo...
Page 23: Playback
Playback 24 pc keyboard hot buttons function pc keyboard hot buttons 1024x768 mode enter (return to the previous mode: enter) full screen mode alt + enter (return to the previous mode: enter) playback speed control ctrl + f 0.5 => 1 reverse playback speed control ctrl + b 0.5 => 1 pause / play space...
Page 24
The route taken will be displayed on the google map at lower right corner of the software. Google maps (for ‘event’ recording files) 25 zoom out note: • to see the route and position on the google map, the gps data should be recorded with video. • to see the map, the pc should be connected to the in...
Page 25: Thumbnail Function
click button for 4x4 multi view (thumbnail function) thumbnail function 26 note: click the right mouse button to go back to single image playback mode click the thumb-nail image to change the playback position click the close button to finish the event playback. The ‘playlist’ window will changed ...
Page 26
Saving jpg file & avi files pause the playback and click ‘save image’ icon to make a jpg file: pause the playback and click ‘save avi’ icon to make a avi file: ‘save image’ icon ‘save avi’ icon 27.
Page 27: Printing An Image
Printing an image ‘print image’ icon pause the playback and click ‘print image’ icon: input the file name (print title) & any notes (print comment) using keyboard. The print comment window allows up to 7 lines in total: 28.
Page 28: Generating A Report
Generating a report click the ‘print’ button in the print preview windows for printing. The file name (print title), any notes (print comment), g-sensor graph & map will be printed on the first page. The second page will print the images selected. click ‘2x2’ and then click ‘print’ to print 4 imag...
Page 29
Backing up event/log files click the ‘backup’ icon to backup the files to the pc ‘backup’ icon select and load ‘event’, ‘normal’, ‘panic’, ‘log’ & ‘memo’ data first, before clicking the ‘backup’ icon. The selected files will appear in the lists in the backup window. Or check ‘backup all’ and press...
Page 30
Setting the drive recorder click the ‘setting drive recorder’ icon for setup ‘setting drive recorder’ icon important backup sd card data first, before clicking the ‘initialize sd card’ button or before changing the record mode from normal to event or vice versa.All normal recording data or all event...
Page 31
Normal mode continuous recording will automatically start after booting the svc400gps. Event mode recording by g-sensor, alarm1~3 or [record] button. Motion sensitivity select motion detection sensitivity from 1 to 5. (5 is the setting for the highest sensitivity and 1 is the lowest sensitivity) set...
Page 32
Resolution pal: 720x576, 720x288 ntsc: 720x480, 720x240 fps (frames per second) 1 camera supports 1~25 fps@ 720x576, 1~25 fps @ 720x288 1 camera supports 1~30 fps@ 720x480, 1~30 fps @ 720x240 2 cameras supports 1~12 fps @ 720x576, 1~25 fps @ 720x288 2 cameras supports 1~15 fps @ 720x480, 1~30 fps @ ...
Page 33
Setting the drive recorder to record the car signal with video, set the alarm configuration as below: to use the alarm as an event trigger, (i.E.: so event recording will start when a door is opened or a meter is on) set the alarm configuration as below: g-sensor settings if g-sensor sensitivity val...
Page 34
Setting the drive recorder 35 vehicle id type in your vehicle id password enter 4 numbers from 1000 to 9999 as a password “search on system” function (i.E. Playback on a car) will not work after the password has been set buzzer set the ‘beep’ sound on/off when event recording starts video type this ...
Page 35
36 new sd memory card initializing should be done using tool menu. 1. Insert new sd memory card into the pc. 2. Run “smart witness analysis software” 3. Select tool from the menu and then click ‘sd initialize’ we recommend you initialize the sd memory card at least once per month to prevent the svc4...
Page 36
Click the ‘about’ icon to check the product information. ‘about’ icon setting the drive recorder 37 about product information.
Page 37: Log File Playback
Log file playback select the log tab window and then check the log file from the list using mouse or click the ‘check all’ button. Then click the ‘load’ button. Gps speed, g sensor x value, g sensor y value, g sensor z value data can all be used to narrow a search for journey information. The small ...
Page 38
39 gps log to kml converter (for google earth) to see the whole route on google earth, select the log file and click the google earth button. 1. Install the google earth on your pc. ( http://earth.Google.Com/ ) 2. Check the log file 3. Click google earth in the tool menu we recommend to use google e...
Page 39: Accessories
Accessories 40 high resolution vandal resistant colour camera with ir night vision. Includes bracket. See diagram below for connection to the svc400gps unit: high resolution colour camera. Includes bracket for flush/surface mounting on a bumper or mounting on a wing mirror see diagram below for conn...
Page 40: Accessories
Accessories monitors 41 5” or 8” lcd monitor can be used with the svc400gps to view images from the cameras, playback recordings and also as a rear view monitor when reversing. See diagram below for connection to the svc400gps unit: internal microphone see diagram below for connection to the svc400g...
Page 41: Specification
Specification 42 svc400gps video ch1 (front), ch2 (interior), ch3 (interior), ch4 (rearview) audio i channel (internal / external microphone) continuous/event recording speed ntsc: 720x480 (30fps) 720x240 (60fps) pal: 720x576 (25fps) 720x288 (50fps snapshot record still image with 5 seconds audio ba...
Page 42
Technical support & warranty technical support for technical support, please contact your local distributor. Limited warranty this product is supplied with 2 year warranty. The warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear....
Page 43
Manufactured exclusively for: www.Smartwitness.Com smart witness is a division of xvision.