- DL manuals
- SMC Networks
- Other
- 2662W-AR
- User Manual
SMC Networks 2662W-AR User Manual
Summary of 2662W-AR
Page 1
Ez connect ™ wireless usb adapter user guide smc2662w-ar v 1.0
Page 2
Ez connect wireless usb adapter manual the 11 mbps wireless usb adapter is an easy to use, cost-effective, high-speed and secure wireless networking device for the networked soho environment. It allows users to share network resources and provides instant access to the internet. Using this adapter i...
Page 3
Driver installation select the driver you need for your system and refer to this guide for the installation and configuration procedure. Any new or updated drivers can be downloaded from smc’s web site at http://www..Smc.Com. Windows 98/me installation 1. Windows 98/me will automatically detect the ...
Page 4
English english 4. Set the "channel" to the same radio channel as that used by the other wireless clients in your group. However, if you are connecting to a network via an access point, the adapter will automatically set the channel to be the same as that used by the access point. 5. For more secure...
Page 5
8. Set the "rts threshold" to the same as that used by other devices in your network. (the default is 2347 which means "disabled") 9. Set the "ssid" identifier to the same as that used by the ad hoc work group or access point you want to connect to. (smc2652w access point default: wlan) if you will ...
Page 6
12. Select the "configuration" tab and click "add" to install the network protocols you want to use, such as ipx/spx, netbeui or tcp/ip. If you install tcp/ip, be sure to set the appropriate gateway, dns server, and domain for your network. If you install an ipx/spx compatible protocol, then you als...
Page 7
English english 4. Finish the driver installation. 5. If you want to add more protocols after installation, go to control panel and double click on "network and dial-up connections" and double click "local area connection x", click "properties". 6. Select the "general" tab and click "install" to ins...
Page 8
English english quick-launch icon after the utility program is running, it will have a "quick launch" icon in the lower right hand corner of the task bar. Double clicking the icon in the quick launch bar will open the ez connect wireless usb utility program, providing quick access to all settings of...
Page 9
English english ps mode enable the power saving mode for reducing power loading. (default: disabled) note : the "channel" can only be set when the "operating model" is "802.11 ad-hoc". The statistics screen the statistics screen displays "data frames" and "management frames". Site survey screen the ...
Page 10
English english create with passphrase security keys for wep encryption are generated from your passphrase string, so you must use the same passphrase on all the other stations in your network. Manual entry "manual entry" allows the user to manually enter key elements. ( 2 hexadecimal digits in each...
Page 11
English english network configuration and planning smc’s ez connect wireless solution supports a stand-alone wireless network configuration, as well as an integrated configuration with 10 mbps ethernet lans. The smc2662w-ar usb adapter can be configured as: • ad hoc for departmental or soho lans • i...
Page 12
English english setting the communication domain stationary wireless pcs the basic service set (bss) is the communication domain for each smc2652w access point. For wireless pcs that do not need to support roaming, set the domain identifier (ssid) for the wireless card to the bss id of the access po...
Page 13
Network connection problems if the led’s on the usb adapter are not lit, or if you can’t access any network resources from the computer. Check the following: • make sure the correct software driver is installed. Try reinstalling the driver. • make sure the computer and other network devices are rece...
Page 14
Compliances fcc class b certification this device complies with part 15 of the fcc rules. Operation is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operati...
Page 15
Specifications functional criteria data rate 1, 2, 5.5, 11 mbps transmission mode half duplex network connection ieee 802.11b wireless operating range max distance of 11mbps: 180m (590ft) max distance of 5.5mbps: 300m (984ft) max distance of 2mbps: 450m (1476ft) max distance of 1mbps: 550m (1800ft) ...
Page 16
Copyright information furnished by smc networks, inc. (smc) is believed to be accurate and reliable. However, no responsibility is assumed by smc for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or ...