SMC Networks 7904BRB3 FICHE User Manual - 1 Introduction
SMC7904BRB3 User Manual
1 Introduction
The ADSL access device supports multiple line modes. It provides four 10/100Base-T Ethernet interface at
the user end. Utilizing the high-speed ADSL connection, the device provide users with broadband
connectivity to the Internet or the Intranet for high-end users as net bars, office users, etc. can provide a
downlink speed up to 24 Mbps and uplink speed up to 1 Mbps.
1.1 Package List
z
One ADSL device (ADSL four port router)
z One power adapter
z
Two pieces of telephone lines (RJ11)
z
One piece of Ethernet cable (RJ45)
z
One copy of QIG (Quick Installation Guide)
z
One User Manual CD
1.2 Safety Precautions
Follow these announcements below to protect the device from risks and damage caused by fire or electric
power.
z
Use volume labels to mark the type of power.
z
Use the power adapter packed within the device package.
z
Pay attention to the power load of the outlet or prolonged lines. An overburden power outlet or
damaged lines and plugs may cause electric shock or fire accident. Check the power cords regularly. If
you find any damage, replace it at once.
z
Proper space left for heat radiation is necessary to avoid any damage caused by overheating to the
device. The long and thin holes on the Access Point are designed for heat radiation to make sure the
device works normally. Do not cover these heat radiant holes.
z
Do not put this device close to a place where a heat source exits or high temperature occurs. Avoid the
device from direct sunshine.
z
Do not put this device close to a place where is over damp or watery. Do not spill any fluid on this
device.
z
Do not connect this device to any PC or electronic product, unless our customer engineer or your
broadband provider instructs you to do this, because any wrong connection may cause any power or
fire risk.
z
Do not place this device on an unstable surface or support.
1
z One Warranty information Card
z
One GPL Notice