SMC Networks Console Specifications

Console Specifications

CS – 0206VLII 

4/4/2006 

Page 1 of 7 

Specifications (Vision Line II) - 

1) Vision Line II General Description  

1.1 For this point forward SMC shall be referred to as the console 

contractor. 

1.2 Vision Line II is a console that is designed to accommodate numerous 

kinds of computers, communication equipment, and user interface devices 

(ex. Keyboards, mice, etc.). 

The console is to be a design that is completely modular, totally 

interchangeable and easily reconfigured by the user. There are to be 

different frame widths (24”, 30”, 36”, 48”, 60” and 72”) that are standard.  

There are 90-degree corners along with wedge designs that allow for 

Convex and Concave layouts (they are to be available in 30, 45 and 60- 

degrees).  Standard height of the console is 43”. All units are bolted 

together allowing total design flexibility. 

The frames are constructed in such a manor as to allow back-to-back 

configurations in straight, convex, and concave layouts. The frame itself 

remains the center spine for the back-to-back work surfaces with access 

to cable management from either side of the frame’s front and the top. 

There are numerous options such as peninsulas, binder storage, and 

storage cabinets.      

1.3 The consoles shall accommodate a variety of computers, 

communication equipment, CRT or Flat Panel displays and operator 

interface devices. The design of the consoles should also satisfy the 

functional, ergonomic and aesthetic requirements of the operational 

working environment. 

 1.4 Construction - 

All construction supplied by the contractor shall be of such a design 

that will allow for 24/7 utilization of the consoles supplied. 

Constructed of formed cold rolled steel, this open architecture 

design provides: 

The frames are to be constructed from 14 Ga.* cold roll steel (as a 

minimum) to support all of the required accessories, work surfaces, 

cables, and user interfaces.