1. DL manuals
  2. SMC Networks
  3. Gateway
  4. SMC8014WN
  5. Administrator's Manual

SMC Networks SMC8014WN Administrator's Manual

Manual is about: DOCSIS 2.0 Wireless Cable Modem Gateway

Summary of SMC8014WN

  • Page 1

    Docsis 2.0 wireless cable modem gateway fastfind links getting to know the gateway installing the gateway configuring your computer for tcp/ip configuring the gateway smc8014wn and smc8014wn2 administrator manual.

  • Page 2

    Smc networks 20 mason irvine, ca. 92618 u.S.A. Copyright © 2012 smc networks all rights reserved information furnished by smc networks, inc. (smc) is believed to be accurate and reliable. However, no responsibility is assumed by smc for its use, or for any infringements of patents or other rights of...

  • Page 3: Contents

    Iii smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual contents preface...................................................................................................................... V key features...........................................................................

  • Page 4

    Contents iv smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual accessing the gateway’s web management............................................................. 31 understanding the web management interface screens .......................................... 32 web managemen...

  • Page 5: Preface

    V smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual preface congratulations on your purchase of the smc8014wn or smc8014wn2 wireless cable modem gateway. The smc8014wn and smc8014wn2 wireless cable modem gateways are ideal all-in-one wired and wireless solutions for the home...

  • Page 6: Key Features

    Preface vi smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual key features the following list summarizes the gateway’s key features. Y integrated cablelabs-compliant docsis 1.1 and 2.0 cable modem y internet connection to cable modem service via an integrated cable modem port...

  • Page 7: Document Organization

    Preface vii smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual document organization this document consists of four chapters and two appendixes. Y chapter 1 - describes the contents in the gateway package, system requirements, and an overview of the gateway’s front and rear p...

  • Page 8

    Preface viii smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual typographic conventions this document also uses the following typographic conventions. Convention description bold indicates text on a window, other than the window title, including menus, menu options, buttons, ...

  • Page 9

    9 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual 1 getting to know the gateways before you install the gateway, check the package contents and become familiar with the gateway’s front and rear panels. The topics covered in this chapter are: y unpacking package contents (p...

  • Page 10: Unpacking Package Contents

    錯誤! 尚未定義樣式。 10 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual unpacking package contents the smc8014wn and smc8014wn2 packages should include the following items: y one smc8014wn or smc8014wn2 wireless cable modem gateway y one external power supply 12v 1.25ma y one categ...

  • Page 11: Hardware Overview

    錯誤! 尚未定義樣式。 11 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual hardware overview smc8014wn front and rear panels the front panel of the smc8014wn wireless cable modem gateway contains a set of light- emitting diode (led) indicators that show the status of the gateway and s...

  • Page 12

    錯誤! 尚未定義樣式。 12 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual the rear panel of the smc8014wn wireless cable modem gateway contains a reset button and the ports for attaching the supplied power adapter and making additional connections. Figure 2 shows the rear panel compo...

  • Page 13

    錯誤! 尚未定義樣式。 13 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual smc8014wn2 front and rear panels the front panel of the smc8014wn2 wireless cable modem gateway contains a set of light-emitting diode (led) indicators that show the status of the gateway and simplify troublesh...

  • Page 14

    錯誤! 尚未定義樣式。 14 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual the rear panel of the smc8014wn2 wireless cable modem gateway contains a reset button and the ports for attaching the supplied power adapter and making additional connections. Figure 4 shows the rear panel comp...

  • Page 15: Restoring Factory Defaults

    錯誤! 尚未定義樣式。 15 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual restoring factory defaults the reset button on the rear panel can be used to return the gateway to its factory default settings. As a result, any changes made to the gateway’s default settings will be lost. If ...

  • Page 16: 2 Installing The Gateway

    16 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual 2 installing the gateway this chapter describes how to install the smc8014wn and smc8014wn2 wireless cable modem gateways. The topics covered in this chapter are: y finding a suitable location (page 17) y connecting to the...

  • Page 17: Finding A Suitable Location

    錯誤! 尚未定義樣式。 17 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual finding a suitable location the gateways can be installed in any location with access to the cable network. All of the cables connect to the rear panel of the gateway for better organization and utility. The le...

  • Page 18: Connecting The Wan

    錯誤! 尚未定義樣式。 18 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 6. Connecting the gateway to the a laptop or desktop computer connecting the wan to connect the gateway to a wide area network (wan) interface: 1. Connect a coaxial cable to the port labeled catv on the ...

  • Page 19

    19 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual 3 configuring your computer for tcp/ip after you install the smc8014wn or smc8014wn2 wireless cable modem gateway, configure the tcp/ip settings on a computer that will be used to configure the gateway. This chapter descri...

  • Page 20

    錯誤! 尚未定義樣式。 20 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual configuring microsoft windows 2000 use the following procedure to configure your computer if your computer has microsoft windows 2000 installed. 1. On the windows taskbar, click start, point to settings, and th...

  • Page 21

    錯誤! 尚未定義樣式。 21 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual configuring microsoft windows xp use the following procedure to configure a computer running microsoft windows xp with the default interface. If you use the classic interface, where the icons and menus resemble...

  • Page 22

    錯誤! 尚未定義樣式。 22 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual configuring microsoft windows vista use the following procedure to configure a computer running microsoft windows vista with the default interface. If you use the classic interface, where the icons and menus re...

  • Page 23

    錯誤! 尚未定義樣式。 23 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 10. Internet protocol properties window 7. Click the ok button to save your changes and close the dialog box. 8. Click the ok button again to save your changes. Figure 11. Local area connection status wi...

  • Page 24

    錯誤! 尚未定義樣式。 24 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual configuring microsoft windows 7 use the following procedure to configure a computer running microsoft windows 7. 1. In the start menu search box, type: ncpa.Cpl figure 12. Typing ncpa.Cpl in the start menu box ...

  • Page 25

    錯誤! 尚未定義樣式。 25 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 14. Local area network connection properties dialog box 4. In the properties dialog box, click obtain an ip address automatically to configure your computer for dhcp (see figure 15)..

  • Page 26

    錯誤! 尚未定義樣式。 26 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 15. Properties window 5. Click the ok button to save your changes and close the dialog box. 6. Click the ok button again to save your changes..

  • Page 27: Configuring An Apple

    錯誤! 尚未定義樣式。 27 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual configuring an apple ® macintosh ® computer the following procedure describes how to configure tcp/ip on an apple macintosh running mac os 10.2. If your apple macintosh is running mac os 7.X or later, the steps...

  • Page 28: 4 Configuring The Gateway

    28 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual 4 configuring the gateway this chapter describes how to use a web browser to configure the gateway. The topics covered in this chapter are: y pre-configuration guidelines (page 29) y accessing the gateway’s web management ...

  • Page 29: Pre-Configuration Guidelines

    錯誤! 尚未定義樣式。 29 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual pre-configuration guidelines before you configure the gateway, observe the guidelines in the following sections. Disabling proxy settings disable proxy settings in your web browser. Otherwise, you will not be a...

  • Page 30

    錯誤! 尚未定義樣式。 30 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual disabling proxy settings in firefox the following procedure describes how to disable proxy settings in firefox. 1. Start firefox. 2. On your browser’s tools menu, click options. The options dialog box appears. ...

  • Page 31

    錯誤! 尚未定義樣式。 31 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual accessing the gateway’s web management after configuring your computer for tcp/ip and performing the preconfiguration guidelines on the previous page, you can now easily configure the gateway from the convenien...

  • Page 32

    錯誤! 尚未定義樣式。 32 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual understanding the web management interface screens the left side of the management interface contains a menu bar you use to select menus for configuring the gateway. When you click a menu, information and any c...

  • Page 33

    錯誤! 尚未定義樣式。 33 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual the bottom right side of the screen contains three buttons: y help displays online help y apply click this button to save your configuration changes to the displayed page y cancel click this button to discard a...

  • Page 34

    錯誤! 尚未定義樣式。 34 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual table 5. Web management interface menus and submenus menus and submenus description see page system lets you disable all residential gateway functions, define a router name, use the router name at command promp...

  • Page 35

    錯誤! 尚未定義樣式。 35 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual system settings menu path: system the system settings menu lets you: y enable or disable all residential gateway functions y define the router name and enable it for use at a command-line prompt y enable or dis...

  • Page 36

    錯誤! 尚未定義樣式。 36 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual table 6. System settings menu option option description disable all residential gateway functions enables or disables all residential gateway functions. • checked = all residential gateway functions are disable...

  • Page 37

    錯誤! 尚未定義樣式。 37 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual password settings menu path: system > password settings the password settings menu lets you change the following settings: y gateway default administrator username and password. Y gateway default user’s passwor...

  • Page 38

    錯誤! 尚未定義樣式。 38 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual table 7. Password settings menu options option description current password enter the current case-sensitive administrator password. For security purposes, every typed character is masked with a dot (y). The de...

  • Page 39

    錯誤! 尚未定義樣式。 39 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual remote management menu path: system > remote management administrative users can use the gateway’s web-based management or telnet to manage the device remotely using the public internet. Y to use web-based mana...

  • Page 40

    錯誤! 尚未定義樣式。 40 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual table 8. Remote management settings menu options option description wan ip address read-only screen that shows the ip address used to access the gateway’s web management interface via the internet. For example,...

  • Page 41

    錯誤! 尚未定義樣式。 41 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual customer ui setup menu path: system > customer ui setup the customer ui setup menu lets you select which menus, submenus, and configuration options are shown to (enable) or hidden from (disable) users. Using th...

  • Page 42

    錯誤! 尚未定義樣式。 42 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 23. Sample customer ui setup menu.

  • Page 43

    錯誤! 尚未定義樣式。 43 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual wan settings menu path: wan the gateway can connect to the cable service provider using either a static ip address or an ip address automatically assigned by a dynamic host configuration protocol (dhcp) server....

  • Page 44

    錯誤! 尚未定義樣式。 44 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual table 9. Wan settings menu options option description do you want to assign your own wan ip address? By default, this option is set to no. Cable modem providers typically use dynamic assignment of ip addresses....

  • Page 45

    錯誤! 尚未定義樣式。 45 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual mac spoofing menu path: wan > mac spoofing if you need to re-register your mac address, use the mac spoofing menu to clone (or “spoof”) the gateway’s registered mac address as necessary. If you use the public s...

  • Page 46

    錯誤! 尚未定義樣式。 46 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual lan settings menu path: lan ip addresses are close to being used up and thus very hard to get. One solution to this problem is "private" ip addresses. Private ip addresses are ranges of ip addresses set aside e...

  • Page 47

    錯誤! 尚未定義樣式。 47 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual table 11. Lan settings menu options option description pubic lan ip ip address ip address of the gateway’s private lan settings. Default ip address is 192.168.0.1. If you change this setting, the gateway reboot...

  • Page 48

    錯誤! 尚未定義樣式。 48 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual ether switch port control menu path: lan > ether switch control by default, the gateway lan ports are enabled to auto-negotiate the highest supported speed and appropriate duplex mode. If these settings prevent...

  • Page 49

    錯誤! 尚未定義樣式。 49 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual the following procedure describes how to change the settings in the ether switch port control menu. 1. To change a port from auto-negotiation to a fixed speed and duplex setting: a. Uncheck the auto check box f...

  • Page 50

    錯誤! 尚未定義樣式。 50 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual wireless basic settings menu path: wireless the wireless basic settings menu lets you configure basic wireless settings, such as: y enabling or disabling the gateway’s wireless operation y selecting an 802.11 w...

  • Page 51

    錯誤! 尚未定義樣式。 51 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual table 12. Wireless basic settings menu options option description wireless on/off enables or disables the gateway’s wireless operation. • enable = gateway’s wireless operation is active. Selecting this option a...

  • Page 52

    錯誤! 尚未定義樣式。 52 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual port forwarding menu path: nat > port forwarding using the port forwarding menu, you can configure the gateway to provide port-forwarding services that let internet users access predefined services. Note: if yo...

  • Page 53

    錯誤! 尚未定義樣式。 53 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual adding predefined services using the following procedure, you can select well-known services and specify the lan host ip address(es) that will provide the service to the internet. 1. In the port forwarding menu...

  • Page 54

    錯誤! 尚未定義樣式。 54 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual table 13. Predefined service menu options option description service list of predefined services from which you can choose. Lan server ip enter the last two octets of the ip address of the lan pc or server runn...

  • Page 55

    錯誤! 尚未定義樣式。 55 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual 6. To delete a customer-defined service, click the radio button to the left of the service in the customer defined service table and click the delete button. No precautionary message appears before you delete a...

  • Page 56

    錯誤! 尚未定義樣式。 56 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual table 14. Customer defined service page options option description name name for identifying the custom service. The name is for reference purposes only and should let you identify this service from others you ...

  • Page 57

    錯誤! 尚未定義樣式。 57 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual security settings (firewall) menu path: firewall the security settings (firewall) menu lets you enable or disable the gateway’s firewall. By default, the gateway’s firewall settings are enabled. To disable the ...

  • Page 58

    錯誤! 尚未定義樣式。 58 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual access control menu path: firewall > access control the access control menu lets you enable access control to block traffic at the gateway's lan interfaces from accessing the internet. Note: the access control ...

  • Page 59

    錯誤! 尚未定義樣式。 59 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual adding predefined filters the gateway lets you select traffic you want to block from the lan to the internet. 1. In the access control menu, check enable access control if it is not checked and click the apply ...

  • Page 60

    錯誤! 尚未定義樣式。 60 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual table 15. Predefined filter menu options option description service list of predefined services you can choose. Lan ips select whether you want to apply the predefined filter to any lan ip address, a single lan...

  • Page 61

    錯誤! 尚未定義樣式。 61 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 35. Customer defined filter menu table 16. Customer defined filter menu options option description name name for identifying the custom filter. The name is for reference purposes only and should let you ...

  • Page 62

    錯誤! 尚未定義樣式。 62 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual special application menu path: firewall > special application using the special application menu, you can configure the gateway to detect multiple- session applications and allow them to pass through the firewa...

  • Page 63

    錯誤! 尚未定義樣式。 63 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 36. Special application menu to enable port triggering: 1. In the special application menu, check enable triggering if it is unchecked and click the apply button. The trigger table becomes available. 2. ...

  • Page 64

    錯誤! 尚未定義樣式。 64 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 37. Trigger menu table 17. Trigger menu options option description name name for identifying the trigger. The name is for reference purposes only and should let you identify this trigger from others you ...

  • Page 65

    錯誤! 尚未定義樣式。 65 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual url blocking menu path: firewall > url blocking using the url blocking menu, you can configure the gateway to block access to certain web sites from local computers by entering either a full url address or keyw...

  • Page 66

    錯誤! 尚未定義樣式。 66 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 38. Url blocking menu enabling url blocking to enable url blocking: 1. In the url blocking menu, check enable keyword blocking if it is not checked and click apply. 2. To exempt a computer from url block...

  • Page 67

    錯誤! 尚未定義樣式。 67 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual blocking sites to block a site: 1. Click in the keyword/domain name field, enter a keyword or the domain name of the site you want to block, and click add keyword. The keyword or domain name appears in blocked ...

  • Page 68

    錯誤! 尚未定義樣式。 68 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual schedule rule menu path: firewall > schedule rule schedule rules work with the gateway’s url blocking feature (described on page 65) to tell the gateway when to perform url blocking. Note: the schedule rule sub...

  • Page 69

    錯誤! 尚未定義樣式。 69 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual email/syslog alert menu path: firewall > email/syslog alert the gateway inspects packets at the application layer, and stores tcp and udp session information, including timeouts and number of active sessions. T...

  • Page 70

    錯誤! 尚未定義樣式。 70 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 40. Email/syslog alert menu configuring email alerts the following procedure describes how to configure the gateway to send email notifications when it detects intrusion attempts. This procedure assumes ...

  • Page 71

    錯誤! 尚未定義樣式。 71 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual 3. Under recipient list, click add. When the recipient adding menu appears (see figure 41), enter the name of the person who will receive email notifications and the person’s email address, and then click apply...

  • Page 72

    錯誤! 尚未定義樣式。 72 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual dmz (demilitarized zone) menu path: firewall > dmz if you have a local client computer that cannot run an internet application properly behind the nat firewall, configure it for unrestricted two-way internet ac...

  • Page 73

    錯誤! 尚未定義樣式。 73 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual configuration tools menu path: tools > configuration tools gateways often get upgraded or swapped out for a number of reasons. There also times when a gateway might fail. In such cases, having a backup file con...

  • Page 74

    錯誤! 尚未定義樣式。 74 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual backing up the gateway’s current configuration locally to back up the gateway’s current configuration locally: 1. If one or more scripts appear to the left of the back up button under locally backup current set...

  • Page 75

    錯誤! 尚未定義樣式。 75 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 45. Download complete dialog box restoring the gateway’s current configuration locally if you backed up the gateway’s configuration settings locally, use the following procedure to restore the settings l...

  • Page 76

    錯誤! 尚未定義樣式。 76 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 46. Warning message when restoring from a configuration file backing up the gateway’s current configuration remotely you can back up the gateway’s current configuration remotely by uploading the smc.Cfg ...

  • Page 77

    錯誤! 尚未定義樣式。 77 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual 2. In the gateway config filename field, enter the name of the configuration file. 3. If one or more scripts appear to the left of the restore button, select the script you want to restore. (running) appears ne...

  • Page 78

    錯誤! 尚未定義樣式。 78 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 47. Warning message when restoring factory defaults.

  • Page 79

    錯誤! 尚未定義樣式。 79 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual reboot menu path: tools > reboot using the reboot menu, you can reset the gateway and retain all changes that have been made to the gateway’s factory default settings. Figure 48. Reboot menu to reboot the gatew...

  • Page 80

    錯誤! 尚未定義樣式。 80 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual diagnostics menu path: tools > diagnostics the diagnostics menu lets you perform three diagnostics to test the gateway’s connectivity. Y the trace route section lets you trace the routing path from the gateway ...

  • Page 81

    錯誤! 尚未定義樣式。 81 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual using the ping tool using the ping tool, you can check the connectivity between the gateway and another local or remote device. The gateway provides a ping tool for conducting the ping with the default gateway,...

  • Page 82

    錯誤! 尚未定義樣式。 82 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual using the trace route tool the gateway provides a trace route tool for conducting the trace route with the default gateway, across the rf interface, or across the wan interface. This tool provides a supplementa...

  • Page 83

    錯誤! 尚未定義樣式。 83 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual sending inspected traffic to a log server the gateway can inspect upstream and downstream traffic, and log the results to the syslog server, where they can be further examined. To send inspected traffic to a lo...

  • Page 84

    錯誤! 尚未定義樣式。 84 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual status menu path: status the status menu is a read-only page that shows: y whether residential gateway (rg) functions are enabled. Y current time and system uptime y internet, gateway, information, wireless, an...

  • Page 85

    錯誤! 尚未定義樣式。 85 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual figure 54. Example of status page.

  • Page 86

    錯誤! 尚未定義樣式。 86 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual cable status menu path: status > cable status the cable status menu is a read-only page that shows the: y user’s cable initialization procedures y cable upstream status y cable downstream status figure 55. Exam...

  • Page 87

    87 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual appendix a - wall mounting the smc8014wn the smc8014wn gateway can be wall mounted if desired (the smc8014wn2 cannot be wall mounted). To wall mount the smc8014wn gateway, perform the following procedure. 1. Locate the dev...

  • Page 88

    錯誤! 尚未定義樣式。 88 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual caution: before drilling holes, check the structure for potential damage to water, gas, or electrical lines. 1. Drill the holes to a depth of at least 1 inch (25 mm). There must be 0.5 inches (10mm) between the...

  • Page 89: Appendix B -  Compliances

    89 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual appendix b - compliances fcc interference statement this equipment has been tested and found to comply with the limits for a class b digital device pursuant to part 15 of the fcc rules. These limits are designed to provide...

  • Page 90: Index

    90 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual index a access control, 58 adding customer-defined filter, 60 adding predefined filter, 59, 60 access control menu, 58 adding customer-defined filter for access control, 60 customer-defined service for port forwarding, 54 ...

  • Page 91

    Index 91 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual f factory defaults restoring, 15 firefox, disabling proxy settings, 30 firewall disabling, 30 front panel, 11, 13 leds, 11, 12, 14 g gateway configuring, 28 connecting to the lan, 17 connecting to the wan, 18 front p...

  • Page 92

    Index 92 smc8014wn and smc8014wn2 wireless cable modem gateway administrator manual powering-on the gateway, 18 preconfiguration guidelines, 29 predefined service for adding port forwarding, 53 predefined filter, 59, 60 private lan ip settings dhcp, 46 domain name, 46 ip address, 46 ip subnet mask, ...

  • Page 93

    20 mason irvine, ca. 92618 u.S.A. Http://www.Smc.Com document number: 50516res02212012.