Summary of T Series
Page 1
T series keypad handheld quick start guide v1.0
Page 2
1 table of content 1. Appearance .................................................................................................................... 3 1.1. General diagram ..................................................................................................... 3 1.2. Keyboard ............
Page 3
2 4.2. Optional accessories ............................................................................................ 13 5. Environmental specifications ................................................................................... 13 6. Warranty terms ..........................................
Page 4
3 1.Appearance 1.1. General diagram 1.2. Keyboard the yellow section are the system defaults, and the functions of the 4 hotkeys are below: f1: start menu. F2: close. F3: camera. F4: system main interface..
Page 5
4 the other keyboard operation: 1.3. Led 2. Operating instructions 2.1. Installing the tf card/sim card/battery a) turnthe back cover screw to the open position and take off the back cover according to the indications as the below. B) insert the sim card and tf card according to the instructions in ...
Page 6
5 c) insert the battery according the instructions on the battery label. D) close the back cover and turn the back cover screw to the lock position. 2.2. Charging a) dc adapter: open the dc in cover at the right side, and charge with a specialized dc adapter. Charging current can reach 2a. B) usb ca...
Page 7
6 note: if there are abnormal situations, such as the t17 cannot operate normally, use the tip of the stylus to press the reset key to restart the t17. 2.4. Connecting to a pc a) make sure microsoft activesync application has been installed in win-xp pc. And make sure wmdc (windows mobile device cen...
Page 8
7 c) select an installation directory in the t17（‘flash storage’ is suggested）, click ‘install’. Note: we suggest installing the application in ‘flash storage’, and saving your data to a tf card. 2.5.2. Directly installing applications if the installation file is compatible on mobile devices, copy t...
Page 9
8 c) click ‘ok ’ 2.7. Camera a) select ‘start->picture & video’, select ‘camera’ or the ‘camera’ key (f3). B) press the camera key (f3) to take photos. C) click screen and select ‘ok’ to exit. 2.8. User serial port the user serial port is com1. Transfer data between t17 and other devices using a db9...
Page 10
9 2.9. Wireless connection (bluetooth/gprs/wifi) 2.9.1. Standard bluetooth a) select ‘start->settings->connections->wireless management’, click the icon to activate the bluetooth device. B) select ‘start-> settings-> bluetooth’, click ‘add new device…’. Follow the tips shown on the screen to finish ...
Page 11
10 g) click ‘setup’ to setup this bluetooth, as shown below. H) the default ‘baudrate’ is 38400. I) the ‘pin’ code refers to the one of the bluetooth device that to be paired with. J) if the ‘auto conn’ is checked, the t17 will automatically connect to the last pairing bluetooth device when powering...
Page 12
11 b) select ‘start->settings->connections->connections’. C) click ‘add a new modem connection’. D) input connection name, select ‘cellular line (gprs)’, click ‘next’. E) input ‘access point name’, click ‘next’. F) click ‘finish’ and add new connection successfully. G) click ‘manage existing connect...
Page 13
12 3.5. Clean boot select ’start-> settings-> system-> clean boot’, to restore factory default settings according to the guide. Note: the password is ‘1234’. Restoring factory settings will clear the system configuration, please be cautious. 3.6. Pwconfig select ‘start-> settings-> system-> pwconfig...
Page 14
13 4.2. Optional accessories 5. Environmental specifications a) operating temperature: -20 ℃ ~+60℃ b) storage temperature: -30 ℃ ~ +70℃ c) drop: 1.5m drop tested on all surfaces d) casing: dustproof and resistant to heavy wind driven rain per ip54 standard e) humidity: 5% ~ 95% (non-condensing) 6. W...
Page 15
14 incidental or consequential damages arising out of the use of, or inability to use, the product. Note: please use the original factory parts. 7. Contact information smart max geosystems co., ltd www.Smartmaxgeosystems.Com info@smartmaxgeosystems.Com add: flat 601, 6/f, vastkin house, 84 jervois s...
Page 16
15 caution! Connection to a usb interface must be limited to usb2.0 version or higher connection to “power use” mode is prohibited..