Digital ultrasonic humidifier apple series model: su-2081b to prolong the life of this humidifier, using distilled water is highly recommended. Do not add fragrance or oil in the water, it will cause the machine to malfunction and void the warranty. Read and save these safety instructions before use.
1 table of contents table of contents 1 introduction 2 important safety instructions 2 note on humidity level 3 parts identification 3 ~ 4 operating instructions 5 protection features 6 storage 6 troubleshooting 7 clean and maintenance 7 technical specifications 8 warranty 8 to prolong the life of t...
2 introduction thank you for purchasing sunpentown digital ultrasonic humidifier. Each unit has been manufactured to ensure safety and reliability. Before using for the first time, please read the instructions carefully and keep them for future reference. Important safety instructions when using ele...
3 note on humidity level • it is best to keep the humidity level between 30~50 percent of relative humidity. • the comfort level of humidity will vary from room to room and with changing room conditions. • in cold weather, windows and even some walls may fog or develop frost from excessive indoor hu...
4 c. Control panel 1 2 3 4 5 6 7 1. On/off: power button • press once to turn unit on. • press again to turn unit off. Note: the power indicator will lit once plug is connected to the outlet. 2. Ion: ionizer button • press once to turn ionizer feature on. Ion will display on lcd. • press again to tu...
5 operating instructions • remove water tank by grasping the housing firmly and pull upwards. • turn water tank over and turn the cap counter-clockwise to open. Fill with cool tap water or distilled water. Do not use hot water. • replace the fill cap by turning clockwise – do not over tighten. Note:...
6 change humidity setting • to change set humidity: press setting button twice and set rh will flash. Press or −−−− button to set desired humidity setting. Range is 0 to 99. • press setting button again when done. • once the unit sense that the room humidity has reached set humidity, unit will cease...
7 troubleshooting 1. Unit is not producing mist. • check if unit is powered on. • check if water is in the tank. • check if water tank is properly placed onto the body. • check if room humidity has reached or is over the set humidity level. • select a higher mist output level. • check if the hygrost...
8 technical specifications input voltage 120v~60hz power consumption 32w coverage 150 ~ 200 sq. Ft. Water tank capacity 2.45l water output capacity 7.5 l per 24 hours unit dimension 10.75” l x 5.75”w x 11” h foot print 8.5” x 4” net weight 4.25 lbs your guarantee if this product is found to be fault...
