1. DL manuals
  2. SPT
  3. Beverage Dispenser
  4. BD-0538
  5. Instruction Manual

SPT BD-0538 Instruction Manual

Manual is about: MINI KEGERATOR

Summary of BD-0538

  • Page 1

    Mini kegerator model: bd-0538 instruction manual please read the instruction manual carefully before installing and operating the beer cooler, and keep it for future reference..

  • Page 2: Introduction

    Introduction this is a household beer cooler, equipped with a co2 cartridge pressure system to keep beer fresh. It brings the beer to the best temperature for cold storage (0 to 4 º c / 32 to 39 º f) within 19-21 hours. The beer cooler can keep the 5l keg cool for an almost indefinite period. We do,...

  • Page 3: How To Select A Keg

    How to select a keg sealed 5l universal mini keg and heineken mini keg applies only pay close attention to safety and storage messages about the keg / on the keg. Check that the keg is neither damaged, nor out-of-date before purchasing. Protect the top surface from being damaged. Otherwise it could ...

  • Page 4

    Figure 1 (important: before replacing the sealants or piercing the cooler kit, you must always follow the instructions marked on the keg to eliminate the excess gas and ensure that the keg has rested long enough to avoid foam coming out through the cooler piercing pin /tap faucet. There is no need t...

  • Page 5: Specifications

    Specifications item descriptions specification 1 voltage ac 110-120v/60hz 2 available capacity 5 liter beer keg 3 rated operating power 65w 4 cooling performance 36°f-53°f / 2°c-12°c 5 noise level ≤ 38db(a); (ambient noise ≤ 25db(a)) 6 dimensions 10.71w*16.3d*16.93h in 7 net weight 13.89 lb 8 co2 pr...

  • Page 6: Parts & Feature

    Parts & feature figure four figure five 1. Top cover 8. Drain switch 2. Co2 cartridge sheath 9. Drip tray 3. Tap handle 10. Co2 pressure relief valve/ knob 4. Tap 11. Door lock button 5. Keg lifter 12. Rear cover 6. Led display 13. Power cord & plug 7. Digital control button 14. Ac power switch 1 2 ...

  • Page 7: Installation & Operation

    Installation & operation a. Installation 1. Take the beer cooler out from its package. Place the beer cooler on a sturdy horizontal (flat) surface. Make sure the beer cooler is at least 5-inches/10 cm away from other appliances and walls on each side to allow proper ventilation. Figure 6 figure 7 2....

  • Page 8: Operation

    B 、 、 、 、 operation universal 5l beer keg 1. Before piercing the plug on the top of the keg, you must always follow the instructions marked on the keg to eliminate the excess gas and ensure that the keg has rested long enough to avoid foam coming out through the tap faucet. 2. With the keg upright, ...

  • Page 9

    4. Loosen the co2 bottle sheath (show as figure 15), insert a non-threaded 16 gram co2 cartridge in the sheath (figure 16), and screw the sheath tightly until you hear it “click” or “pop” (figure 17), which indicates that the cartridge seal has been pierced and the co2 gas can flow into the keg free...

  • Page 10

    7. It will take 19-21 hours to cool the beer down to 35-50°f at 72-75°f ambient temperature. And it can keep the temperature as set and displayed on the led. (the led will display the real temperature of the beer). We do, however, suggest that you initially cool your beer keg for at least 12 hours i...

  • Page 11

    8. You can set the temperature to fit your taste. The temperature can be set from 36°f to 53°f (2°c to 12°c). Use the temperature adjustin g buttons (+ and -) located next to the temperature display. The pcb has memory function, when you power on the cooler, it memorizes the last set temperature. Th...

  • Page 12: Heineken Keg

    Ｃ、 Ｃ、 Ｃ、 Ｃ、 heineken keg heineken kegs are pre-charged with co2 and do not require the use of a regulator. Do not install the co2 cartridge. Leave the control knob in the off, “-”, position figure 21 1. The heineken connectors that come with your beer cooler can work with all heineken 5 liter kegs. ...

  • Page 13

    Figure 24 figure 25 3. Close the top cover; operate it as above step 6-12, as the universal 5 liter keg, but step 9 is exception. D 、 、 、 、 to change a new beer keg (5 liter universal keg) when the beer keg runs out follow the instructions below before installing a new beer keg. 1 ． adjust the co2 p...

  • Page 14

    Figure 26 figure 27 Ｅ Ｅ Ｅ Ｅ . To change the co2 cartridge (not needed for heineken keg) please change the co2 cartridge when beer cannot be dispensed - the co2 pressure knob is at “on” position and there is beer in keg. 1. Turn the co2 pressure knob to “-“ position to close the co2 supply. 2. Open t...

  • Page 15

    Warning: 1 ． please use a qualified and approved co2 cartridge. It should be beverage grade. The co2 cartridge information below is for your reference. Never use a nitrogen gas cartridge in the beer cooler to avoid an explosion, because of its much higher pressure. Also do not use co2 cartridges des...

  • Page 16

    1. Open the drain switch to drain out the water from the cavity into the drip tray. Make sure the drip tray is inserted into the notch to avoid spilling water on the counter. The drip tray can hold 15oz (450ml) water so you may need to do this twice. 2. After all the water has drained out, lift the ...

  • Page 17: Change Spare Parts

    Change spare parts accessories included with your beer cooler items name qty. Installment picture spare parts 1 connector seal 6 regulator valve 5pcs 2 co2 connector 2 regulator valve 1pcs 3 beer tube 2 beer-out connector 1pcs 4 tube seal circle 4 beer-in pipe 3pcs 5 keg seal 2 standard tub 2pcs 6 h...

  • Page 18

    Figure 31 figure 32 warning: remember press the seal circle with empty cartridge instead of new cartridge, or will cause hazard. B 、 、 、 、 to change beer tube(show as figure 33) please replace the beer tube if beer tube is damaged and leaking. 1 ． loosen the tube from connection: 1, pull out the loc...

  • Page 19: Maintenance

    Figure 34 maintenance if the beer cooler does not work properly, please call the service center; to save time and money, before you call for service, check the troubleshooting guide. It lists cause of minor operation problems that you can correct yourself. Troubleshooting trouble cause troubleshooti...

  • Page 20

    Your guarantee if this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge. This guarantee is subject to the following terms: • sunpentown must be notified of the fault. • proof of purchase must be pre...