SPT SF-608RA Instruction Manual - Specifications
5
5. COOL AIR (HUMIDIFY) button
o
Press once to turn on the water pump, the Cool indictor light is on; press again to turn off
the water pump and the Cool indicator light is off.
o
If the water level is below “Empty” or if the water tank is empty, please do not turn on
this function. If you do, you will hear a strange noise (made by the water pump trying to
pump water), please turn off this function or add water immediately.
o
To prevent damage to the water pump, when operating the unit without water, please keep
the Cool Air / Humidifying function OFF. The unit will operate as a normal electric fan.
6. WATER FILLING INSTRUCTIONS
o
Please be sure the power is OFF before adding water.
o
Fill the water tank by pouring water and adding ice into the Ice & Water Inlet.
o
The water level can be seen from the water indicator located at the lower right front
panel.
o
Make sure water is filled above the EMPTY mark on the water indicator.
o
Pour in 2/3 of water (6 Liters) and 1/3 of ice (3 Liters) for best cooling effect.
o
You can also put some ice or ice packs in the “Ice Box” located on the top of the unit for
extra cooling (optional).
o
DO NOT add more than 10 Liters of water into the water tank. The water indicator
should never rise above “Maximum” or the water tank will overflow.
NOTE: When operating the unit for the first time, please add water to the Maximum
level.
Specifications
Model
Rated
Voltage
Rated
Frequency
Rated
Power
Water
Consumption
Water Tank
Capacity
Speed
Dimensions
N.W.
SF-608RA
~120V
60Hz
65W
0.6-0.7L/h
10L
8m/s
15.4”x11.8”x25.2”
16.51bs