SPUTNIK MODULAR 6-CHANNEL MIXER User Manual - Installation

6-CHANNEL MIXER

SPUTNIK MODULAR

SPUTNIK-MODULAR.COM

INSTALLATION

Remove module from packaging.

Power down your modular synthesizer and disconnect the power 

cable from the wall outlet.

Attach the included power cable to the module’s power connector and 

connect the other end to the power distribution bus in your EuroRack 

synthesizer case. If you have a bi-colored ribbon cable the red stripe 

should be on a same side with a bold white line on a pcb. In case if you 

have a rainbow-colored ribbon cable the key is brown. Connector also 

has a key which should match sikscreen on a pcb.

Position the module on the mounting rails in your EuroRack case and 

screw down mounting screws. Power up! If your case does not turn on 

properly then you have installed the module incorrectly. Simply power 

down and make sure to follow the diagram when reconnecting the 

module. 

1

2

3

4

BI-COLORED RIBBON

WHITE STRIPE

–12V

RAINBOW RIBBON

WHITE STRIPE

–12V

KEY