SPX Cooling Technologies MARLEY MH MHF702 User Manual - Preparation

4

Preparation

The Marley MH Fluid Cooler with CoolBoost™, purchased for this instal-

lation represents the current state of the art in crossflow, induced draft 

fluid cooler design. Thermally and operationally, it is the most efficient 

fluid cooler of its class.

These instructions—as well as those offered separately on motors, fans, 

Geareducer

®

, couplings, drive shafts, float valves, pumps, etc.—are in-

tended to assure that the fluid cooler serves you properly for the maximum 

possible time. Since product warrantability may well depend upon your 

actions, please read these instructions thoroughly prior to operation.

If  you  have  questions  about  the  operation  and/or  maintenance  of  this 

product, and you don’t find the answers in this manual, please contact 

your Marley sales representative. When writing for information, or when 

ordering parts, please mention product serial number shown on the name-

plate located on the access door. 

Safety First

The location and orientation of the fluid cooler can affect the safety of those 

responsible for installing, operating or maintaining the fluid cooler. However, 

since SPX Cooling Technologies does not determine the location or orienta-

tion of the fluid cooler, we cannot be responsible for addressing those safety 

issues that are affected by the fluid cooler’s location or orientation.

WarNiNg

The following safety issues should be considered by those responsible 

for designing the tower installation.

•  access to and from the fan deck

•  access to and from maintenance access doors

•  the possible need for ladders (either portable or permanent) to

gain access to the fan deck or maintenance access doors

•  the possible need for handrails around the fan deck

•  the possible need for external access platforms

•  potential access problems due to obstructions surrounding the tower

•  lockout of mechanical equipment

•  the possible need for safety cages around ladders

•  the need to avoid exposing maintenance personnel to the potentially

unsafe environment inside the fluid cooler

 Warning