Spy Tec TAR-22 User Manual

Summary of TAR-22

  • Page 1

    Tiny audio recorder tar-22 user manual version 1.16.

  • Page 2

    Quick guide to quickly operate tar-22 recorder, following steps must be done: 1) insert zinc air or alkaline battery according the picture with the positive terminal on top. After inserting the battery, you must observe one single flash of led after about 5 seconds, which indicates that the recorder...

  • Page 3

    Detailed description this recorder let‘s you to record any audio or human conversation in high quality and store all into build-in flash memory. The great advantage is in very small size and very long battery life in recording mode, which allows you to make continuous recording in length of several ...

  • Page 4

    Battery life for all sample rates and compression methods (zinc-air battery, type za675) sample rate none ulaw 4bit adpcm 2bit adpcm 5,5khz 85 85 75 82 8khz 70 73 60 70 11khz 57 67 45 60 16khz 43 52 31 36 22khz 26 28 - - battery life for all sample rates and compression methods (alkaline battery, ty...

  • Page 5

    Using recorder - manager application this software is used for overview, export and replay of all stored data. When you start this application you must open the image file, which is stored in internal memory of recorder. When the recorder is connected to pc, it is detected as usb flash drive, contai...

  • Page 6

    The first general part is used to select recording sample rate and compression method. To achieve the best quality you should use 16khz or 22khz without compression, but this mode takes the most power from the battery and will use most of the space for storing the data. For best performance check ta...

  • Page 7

    Recorder is equipped with internal real time clock and recording scheduler. If you want to use time activated recording, you can choose from 3 options. Daily timer enables recording scheduler to start and stop recording at the specified time period, which repeats every day. Single timer is used to s...

  • Page 8

    Stop recording”. Led should be disabled in this window to allow discrete mode of operation. Only flashes during recording are disabled. Indication of power up, start and stop sequence is not affected by this option. The real time clock is synchronized with the pc by pressing the button “synchronize ...