1. DL manuals
  2. SPYKER
  3. Lawn and Garden Equipment
  4. 76-22
  5. Operation Manual Service Manual Parts List

SPYKER 76-22 Operation Manual Service Manual Parts List

Manual is about: Spreading Chart

Summary of 76-22

  • Page 1

    Spreading chart operation guide service manual parts list for models: 76-22 96-22 78-22 98-22 model: 98-22 pictured spread with confidence spread with confidence it’s the spread that counts it’s the spread that counts p.O. Box 7 140 mill street urbana, in 46990 usa 1-800-972-6130 fax: 260-774-3416 ©...

  • Page 2

    2 1. Sit spreader assembly on hopper as shown. 2. For stainless steel models remove nuts and bolts that attach front of hopper to frame as indi- cated, and then insert bump bar (3) into frame assembly. Next, re-insert bolts and tighten nuts. Tow behind frame assembly note: for black frames remove nu...

  • Page 3

    4 5. Insert clevis pin (43) into hitch plates and fasten with cotter pin (42). Tow bar assembly 6. Attach on/off lever control (46) to tow bar assembly using 2 bolts (32) and nuts (33). Proceed to page 9 for instructions on connecting cable to rate gate linkage. 3 3. Attach braces (8) to frame with ...

  • Page 4

    6 3. Attach t-handle assembly to frame with 1 bolt (31) and nut (34). Walk behind frame assembly 4. Attach braces (8) to frame and t- handle assembly. Use 3 bolts (35) and nuts (34) to attach braces to the frame and to the round tube of ground prop. Use bolt (57) and nut (34) to attach braces to the...

  • Page 5

    8 rate dial adjustment new linkage adjustment procedure 1. Set regulator dial to 1. 2. Set lever completely to off position. 3. Attach cable clamp (59) to ground prop with 1 1 / 4 ” bolt and nut and finger tighten. 4. Route cable through clamp, then through swivel and then tighten the cable clamp bo...

  • Page 6

    10 56 38 8 4 41 8 57 35 35 35 5 32 13 7 37 6 34 34 34 34 34 34 34 34 33 48 48 9 10 34 37 31 4 3 1 35 35 35 35 55 55 55 55 30 & frame assembly view 9 exploded walk behind hopper 56 38 8 4 41 8 57 35 35 35 5 32 13 7 37 6 34 34 34 34 34 34 34 34 33 48 48 9 10 34 37 31 4 3 1 35 3 35 35 55 5 55 55 30 vie...

  • Page 7

    12 45 33 47 46 32 48 48 9 30 35 35 35 35 55 55 55 55 1 3 34 35 34 37 35 34 37 37 34 34 34 34 34 34 36 42 43 44 8 8 41 4 10 35 56 38 34 & frame assembly note: nylon washers [55] go on plastic hoppers only view 45 33 47 46 32 48 48 9 30 3 35 3 55 55 5 55 1 3 34 35 34 37 35 34 37 37 34 34 34 34 34 34 3...

  • Page 8

    Parts list item # part # quantity description price 1 05-94-0054-0 1 hopper/black 2 05-91-1100 1 hopper/stainless 3 05-81-1030 1 hand hold/bump bar/painted 3 05-97-3030 1 hand hold/bump bar/stainless 4 05-81-1020 1 frame/painted 4 05-97-3020 1 frame/stainless 5 05-94-1120 1 ground prop./painted 5 05...

  • Page 9

    16 read before using rotary agitator use the rotary agitator only if needed. Free-flowing, lump-free materi- als will not require the agitator. The rotary agitator is easily installed or removed. Note the clockwise rotation & sweep. Place felt washer around spinner shaft before inserting agitator. -...

  • Page 10

    18 read before using accuway - what it does accuway spread pattern equalizer balances the spread pattern - bulls eye - dead to the center of the spreader. All products. All spreading conditions. Skewing is eliminated. Does not change the spread width. Caution: never, never, never use the accuway to ...

  • Page 11

    19 read before using the accuway has two ramps. A front side and a back side ramp. The front side ramp 2 is used to shift the spread pattern to the right. The back side ramp 1 is used to shift the spread pattern to the left. Never, never, never use accuway front and rear ramps to split the product f...

  • Page 12

    1 year limited warranty this is warranted to the original purchaser only, other than used commercially, against defects in materials and workmanship, for a period of one year from the date of purchase. *for spyker spreaders llc, products employing metal gear systems, pinion and bevel, these metal ge...