Spypoint LIT-C-8 User Manual

www.spypoint.com

LIT-C-8

v.1.1

RECHARGEABLE LITHIUM BATTERY

AND CHARGER

User manual

Before using the lithium battery for the fi rst time, 

carefully read the following instructions to use it to 

its full potential.

FEATURES

• Charging time

≈ 6 hours

• Operating temperature

(-20 °C to +50 °C)

(-4 °F to +122 °F)

• Storage temperature

(-30 °C to +75 °C)

(-22 °F to + 167 °F)

• Voltage

7.4 volts

• Capacity

2000 mAh

KIT INCLUDES

• Rechargeable lithium battery (LIT-09)

• AC charger

• User manual

RECHARGING THE LITHIUM BATTERY

To recharge the battery, plug it in the provided AC charger. Green light indicates that 

the battery is fully charged. The light will turn to red during the charge. The charger 

will automatically stop recharging when the green light is on.

INSERT LITHIUM BATTERY IN A CAMERA

USING WITH A SOLAR PANEL

To maintain the charge of the lithium battery with the solar panel, insert the battery 

into battery case of the camera. Plug the solar panel in the “DC 12V” or “Solar 

Panel” outlet of the camera (see user manual of the camera to make sure it is 

compatible with the solar panel).

Make sure that the battery is fully charged before plugging in the solar panel. It will 

keep the charge of the battery but does not recharge it if it is empty.

RED

BLA

CK

Solar panel

SPYPOINT camera

LIMITED WARRANTY

SPYPOINT LIT-C-8 designed by GG Telecom, is covered by a one (1) year 

warranty on material and workmanship starting from its original date of purchase. 

The sales receipt is your proof of purchase and should be presented if warranty 

service is needed.

This warranty does not cover any GG Telecom product whichhas been subjected 

to misuse, neglect and accidents or has been improperly used or maintained. Any 

modification or tampering of the product will affect its operation, performance, 

durability and void this warranty.

REPAIR SERVICE

Repairs for damages not covered by the warranty will be subject to a reasonable 

charge. For technical assistance, write to tech@spypoint.com. Give a description 

of the problem with a phone number where you can be reached.

IMPORTANT: Under no circumstances will GG Telecom accept returned products 

without a Return Material Authorization number (RMA).

Step 1

Insert the battery in the battery case of the camera 

starting with the down side.

Step 2

Push on top of the battery to insert it completely in the 

battery case.

Note: For the latest update of the user 

manual, refer to our website.