Spypoint mini-LIVE Quick Start Manual - page 2
E. Set the Transmission mode option (mini-LIVE only).
• mySPYPOINT: The camera communicates with the
mySPYPOINT server to update its status or to send photos
to the user account.
MySPYPOINT subscription is required. Activation pro-
cedure available at spypoint.com/activation.
• MMS: The camera communicates by MMS to update its
status or to send photos. Enter up to 5 different phone
numbers to which the MMS will be sent. The country code
and area code must be entered. One MMS is charged for
each
recipient.
A MMS plan is required, available from a compatible
cellular service provider.
• Email: The camera communicates by email to update its
status or to send photos. Enter up to 5 different email
DGGUHVVHVWRZKLFKQRWL¿FDWLRQVZLOOEHVHQW
A data plan is required, available from a cellular ser-
vice provider.
F. Set the Frequency option. Allows the user to choose the
number of synchronizations that the camera performs in a
day.
G. Set the First synch time option. Allows the user to choose at
ZKDWWLPHRIWKHGD\WKHFDPHUDFRPPXQLFDWHVIRUWKH¿UVW
time.
E.g.: If the "Frequency" option is set to 6/day and "First synch
time" at 04:00, the camera performs 6 synchronizations per
GD\DQGVWDUWV¿UVWVHQGLQJDWKKKKKDQG
24
h.
2.
CONFIGURE THE WIRELESS SETTINGS
A. In the main menu, select SETTINGS and then, WIRELESS to
access to the Wireless settings menu.
B. Set the Cellular option. Activate this option to send photos by
cellular
transmission.
For mini-LIVE-4GV camera, go directly to the
F
step.
C. Set the Country option. The country where the camera is
used must be selected.
D. Set the Provider option. The provider selected must
correspond with the SIM card used in the camera.
For mini-LIVE-4G camera, go directly to the
F
step.
Power source
LIT-09 charger option
• 6 AA
• 12V
• 12V + 6 AA
OFF
• LIT-09
*
• 12V + LIT-09
*
• Solar panel + LIT-09
*
ON
*
Rechargeable lithium battery pack, sold separately (LIT-09)
or with a charger (LIT-C-8).
Use the K and buttons to navigate in the interface and to change
RSWLRQV8VHWKH2.EXWWRQWRFRQ¿UPDQGWKH2 button to return to
the previous menu.
1.
CONFIGURE THE GENERAL SETTINGS
A. Turn on the camera by pressing the power button.
B. In the main menu, select SETTINGS and then GENERAL to
access to the General settings menu.
C. Set the Date (MM/DD/YY or DD/MM/YY).
D. Set the Time (Hour/Minute).
E. Set the Schedule option. This option allows the user to set
the period of operation of the camera for each day of the
week. For a 24 hour operation, the same start and stop times
must be entered as followed (e.g.: 00:00/00:00).
F. Set the LIT-09 charger option depending on the power
source (see next table).
Settings
3.
CONFIGURE THE SETTINGS OF THE OPERATING MODE
In the main menu, select SETTINGS and then, PHOTO, TIME
LAPSE or VIDEO to access to the respective operating mode
menu.
PHOTO
Delay: Allows the user to choose the time interval between each
detection before the camera can record the next photo.
Multi-shot: Takes up to 6 consecutive shots at each detection,
with a 10 second delay between each photo.
TIME
LAPSE
Interval: This option allows the camera to take photos at regular
preset intervals without detection.
VIDEO
Delay: Allows the user to choose the time interval between each
detection before the camera can record the next video.
Video lenght: Allows the user to select the duration of the
ecording.
3KRWR ¿UVW: When this option is enabled, a photo is taken
immediately before each video.
PERFORM THE STEPS 4 TO 6 DURING THE FINAL
INSTALLATION OF THE CAMERA.
4.
TEST THE DETECTION OF THE CAMERA
When the TEST mode is selected,
no photo or video is recorded. Pass
in front of the camera from left to
right. When the camera detects
motion, the test light blinks to
indicate that the camera would
normally have saved a photo or
video. If the system does not
detect the movement, increase
the detection sensitivity using the
SENSITIVITY option in the GENERAL SETTINGS menu or realign
the system differently. In TEST mode, it is possible to take a
photo by pressing the OK button. The photo is saved and appears
in the VIEW mode.
5.
VERIFY THE CELLULAR SIGNAL
Still in the TEST mode, make sure to have a cellular
signal. The signal bars are displayed at the top of
the screen.
6.
START THE CAMERA
Select the desired operating mode
(photo, time lapse or video) on the
main menu by pressing OK. When
the mode is selected, the test light
LQIURQWRIWKHFDPHUDZLOOÀDVKIRU
60 seconds to allow the user to
leave the area without being pho-
tographed or recorded.
FACEBOOK.COM/SPYPOINT
TWITTER.COM/SPYPOINTCAMERA
YOUTUBE.COM/SPYPOINTTRAILCAM
Utiliser les boutons K et pour naviguer sur l’interface et changer
d’option, le bouton OK pour sélectionner et le bouton 2 pour retourner
au menu précédent.
1.
CONFIGURER LES PARAMÈTRES GÉNÉRAUX
A. Allumer la caméra en appuyant sur le bouton de mise sous
tension.
B. Dans le menu principal, sélectionner CONFIGURATION puis,
*e1e5$/SRXUDFFpGHUDXPHQXGHFRQ¿JXUDWLRQJpQpUDO
C.
Régler l'option Date (MM/JJ/AA ou JJ/MM/AA).
D. Régler l'option Heure (Heure/Minute).
E. Régler l'option Période &HWWH RSWLRQ SHUPHW GH FRQ¿JXUHU
la période de fonctionnement de la caméra pour chaque
journée de la semaine. Pour un fonctionnement en tout temps
(période d’opération de 24 heures), les mêmes heures de
début et d’arrêt doivent être programmées (ex.: 00:00/00:00).
F. Régler l'option Chargement LIT-09 en fonction de la source
d'alimentation (voir tableau suivant).
CRQ¿JXUDWLRQ
2.
CONFIGURER LES PARAMÈTRES SANS FIL
A. Dans le menu principal, sélectionner CONFIGURATION puis,
6$16),/SRXUDFFpGHUDXPHQXGHFRQ¿JXUDWLRQVDQV¿O
B. Régler l'option Cellulaire. Activer cette option pour que les
photos soient envoyées par transmission cellulaire.
Pour la caméra mini-LIVE-4GV, passer directement à
l'étape
F
.
C. Régler l'option Pays. Le pays où la caméra est utilisée doit
être
sélectionné.
D. Régler l'option Fournisseur. Le fournisseur sélectionné doit
correspondre à la carte SIM utilisée dans la caméra.
Pour la caméra mini-LIVE-4G, passer directement à
l'étape
F
.
Source d'alimentation
Option Chargement LIT-09
• 6 AA
• 12V
• 12V + 6 AA
Arrêt
• LIT-09
*
• 12V + LIT-09
*
• Panneau solaire + LIT-09
*
Marche
*
Bloc pile lithium rechargeable, vendu séparément (LIT-09) ou
avec un chargeur (LIT-C-8).
E. Régler l'option Mode transmission (mini-LIVE seulement).
• mySPYPOINT: La caméra communique avec le serveur
mySPYPOINT pour mettre à jour son état ou pour envoyer
des photos sur le compte de l’utilisateur.
Abonnement au service mySPYPOINT requis. Procé-
dure d'activation disponible à spypoint.com/activation.
• MMS: La caméra communique par MMS pour mettre à jour
son état ou pour envoyer des photos. Entrer jusqu'à 5
numéros de téléphone différents vers lesquels les MMS
seront envoyés. Le code de pays ainsi que l'indicatif régional
doivent être entrés. Un MMS est facturé pour chaque
destinataire.
Un forfait MMS est nécessaire, disponible auprès d'un
fournisseur cellulaire compatible.
• Email: La caméra communique par courriel pour mettre à
jour son état ou pour envoyer des photos. Entrer jusqu'à 5
DGUHVVHVFRXUULHOGLIIpUHQWHVYHUVOHVTXHOOHVOHVQRWL¿FDWLRQV
seront
envoyés.
Un plan data est nécessaire, disponible auprès d'un
fournisseur cellulaire.
F. Régler l'option Fréquence. Permet de choisir le nombre de
synchronisations que la caméra effectue par jour.
G. Régler l'option Première synch à. Permet de choisir à quel
moment de la journée que la caméra communique pour la
première
fois.
Ex. : Si l’option «Fréquence» est réglée à 6/Jour et «Première
synch à» à 04:00, le contrôleur effectue 6 synchronisations
par jour et commence son premier envoi à 4 h, puis à 8 h, 12 h,
16 h, 20 h et 24 h.
3.
CONFIGURER LES PARAMÈTRES DES MODES
D'OPÉRATION
Dans le menu principal, sélectionner CONFIGURATION puis,
3+2727,0(/$36(RX9,'e2SRXUDFFpGHUDXPHQXGHFRQ¿JX
ration du mode respectif.
PHOTO
Délai : Permet de choisir l’intervalle de temps avant que la
caméra ne détecte à nouveau et puisse enregistrer la prochaine
photo.
Multi-photos : Permet de prendre jusqu’à 6 photos consécutives
à chaque détection, avec un délai de 10 secondes entre chaque
photo.
TIME
LAPSE
Intervalle : Permet la prise de photos à intervalles réguliers
SUpGp¿QLV VDQV TX¶LO \ DLW SRXU DXWDQW XQH GpWHFWLRQ GH
mouvement.
VIDÉO
Délai : Permet de choisir l’intervalle de temps avant que la
caméra ne détecte à nouveau et puisse enregistrer la prochaine
vidéo.
Durée vidéo3HUPHWGHFRQ¿JXUHUODGXUpHG¶HQUHJLVWUHPHQW
des séquences vidéo.
Photo prévidéo : Lorsque cette option est activée, une photo
est prise immédiatement avant chaque vidéo.
EFFECTUER LES ÉTAPES 4 À 6 PENDANT
L'INSTALLATION FINALE DE LA CAMÉRA.
4.
TESTER LA DÉTECTION DE LA CAMÉRA
Lorsque le mode TEST est sélec-
tionné, aucune photo ou vidéo n’est
enregistrée. Passer devant la caméra
de façon perpendiculaire. Lorsque la
caméra détecte un mouvement, la
lumière de test clignote pour indi-
quer que la caméra aurait normale-
ment enregistré une photo ou une
vidéo. Si le système ne détecte
pas les mouvements, augmenter la
sensibilité de détection à l’aide de l’option «Sensibilité» située
dans le menu de CONFIGURATION GÉNÉRALE. Réaligner le
système peut aussi être nécessaire. En mode TEST, il est possible
de prendre une photo en appuyant sur le bouton OK. La photo est
enregistrée et apparaît dans le mode VISIONNEMENT.
5.
VÉRIFIER LE SIGNAL CELLULAIRE
Toujours dans le mode TEST, s'assurer d'avoir un
VLJQDOFHOOXODLUH/HVEDUUHVGHVLJQDOVRQWDI¿FKpHV
en haut de l'écran.
6.
DÉMARRER LA CAMÉRA
Sélectionner le mode d'opération
désiré (photo, time lapse ou vidéo)
dans le menu principal en appuy-
ant sur OK. Lorsque le mode est
sélectionné, la lumière de test sur
le devant de l’appareil clignote du-
rant 60 secondes pour permettre à
l’utilisateur de quitter les lieux sans
rWUHSKRWRJUDSKLpRX¿OPp
FACEBOOK.COM/SPYPOINT
TWITTER.COM/SPYPOINTCAMERA
YOUTUBE.COM/SPYPOINTTRAILCAM
Photo
Time lapse
Video
Test
View
Settings
MAIN MEN
MAIN MEN
MAIN MEN
MAIN MENU
E
IN
E
IN
E
IN
E
IN
Photo
Time lapse
Video
Wireless
General
Photo
Time lapse
Video
Test
View
Settings
MAIN MEN
MAIN MEN
MAIN MEN
MAIN MENU
E
IN
E
IN
E
IN
E
IN
Photo
Time lapse
Video
Wireless
General
Photo
Time lapse
Video
Test
View
Settings
MAIN MEN
MAIN MEN
MAIN MENU
MAIN MEN
E
IN
E
IN
E
IN
E
IN
Photo
Time lapse
Video
Wireless
General
Photo
Time lapse
Video
Test
View
Settings
MAIN MEN
MAIN MEN
MAIN MENU
MAIN MEN
Photo
Time lapse
Video
Test
View
Settings
MAIN MEN
MAIN MEN
MAIN MENU
MAIN MEN
Photo
Time lapse
Vidéo
Test
Visionnement
&RQ¿JXUDWLRQ
MENU IN
MENU IN
MENU IN
MENU IN
I A
I
I
N I U A
N I U A
N I U A
N I U A
I N
Photo
Time lapse
Vidéo
6DQV¿O
Général
Photo
Time lapse
Vidéo
Test
Visionnement
&RQ¿JXUDWLRQ
MENU IN
MENU IN
MENU IN
MENU IN
I A
I
I
N I U A
N I U A
N I U A
N I U A
I N
I
Photo
Time lapse
Vidéo
6DQV¿O
Général
Photo
Time lapse
Vidéo
Test
Visionnement
&RQ¿JXUDWLRQ
MENU IN
MENU IN
MENU IN
MENU IN
I A
I
I
N I U A
N I U A
N I U A
N I U A
I N
Photo
Time lapse
Vidéo
6DQV¿O
Général
Photo
Time lapse
Vidéo
Test
Visionnement
&RQ¿JXUDWLRQ
I
I
I
I
CI
C
CI
CI
Photo
Time lapse
Vidéo
Test
Visionnement
&RQ¿JXUDWLRQ
MENU IN
MENU IN
MENU IN
MENU IN
I A
I
I
I