Spytec Digital Clock with Hidden Camera Quick Start Manual - page 2
Getting Started with Your Clock
1. Begin by removing the battery cover. Then insert
your Micro SD card into the slot labeled “TF.” When
inserting the Micro SD card, make sure that the gold
contacts are facing up.
2. Remove both batteries in order to remove the paper
tab blocking the battery contacts. Once the tab has
been removed, replace the batteries back into the
clock.
3. Connect the USB power adapter for 8 hours in order
to fully charge the clock.
4. Turn the On/Off switch to the ON position to enable
the camera feature.
5. While pointing the remote at the clock, press the
button and a blue light will appear on the left side of
the clock screen, indicating that the camera is now in
stand-by mode. Pressing the
button again will
turn the blue light off, indicating that the camera is
now shut off.
Using the Video Recording Feature
1. While the clock is in stand-by mode, press the
button on the remote and the blue light will blink 3
times and shut off. The clock will now be recording.
2. To stop recording, press the
button again
and the blue light will reappear.