Spytec Inventio-HD Pro User Manual
Symptom
Possible Reason
Solution
Fail to start
Low Power
Recharge Battery
System Halted
Reset, then start
again
Auto shut off
Low Power
Recharge battery
Green LED flash
Device can not
be recognized by
computer
USB Cable failure
Replace new cable
PC Bios disabled
Set USB enabled
Main board does not sup-
port USB port
Update mainboard
driver
Data not Saving
Memory is full
Remove video files
Power off automati-
cally after starting
Low Power
Recharge
Memory is full
Remove Video files
Product size
6 x 1.5 x 2in. (folded)
USB
2.0(HS)
Physical Weight
2oz
Resolution
1920x1080P@30fps 1280x720P @60fps
Power Supply
Embedded 550mAH Li-polymer Battery
Video Format
Mov/H.264
Pixels
5 mega
Power Duration
about 1 hour
Memory
Support Max High Speed 32gb TF card
Power Consumption
Audio
Stereo
Working Temp
23 °F to 104 °F
Storage Temp
4 °F to 158 °F
Fov
135 degree
Menu Language
English
Player
VLC, Media player, Real Player, Quicktime
Operating System
win7, WinXP, Windows Vista, Mac Os 10.7
A. The Inventio-HD Pro supports up to 32GB
microSD cards. MicroSD cards with a speed
of Class 6 or higher are strongly recom-
mended for optimal video quality.
B. When your microSD card is full, the Inven-
tio-HD Pro blue LED light will light up for
1-2 seconds. At this point, the Inventio-HD
Pro will automatically save all data and
power off.
A. To charge the Inventio-HD Pro battery,
connect the Inventio-HD Pro to a computer
or AC adaptor using the enclosed cables.
B. A red LED light will appear, indicating that
the battery is successfully charging. It
should require approximately 3-4 hours to
fully charge your Inventio-HD Pro.
C. A green LED light will appear when the
battery is fully charged.
Troubleshootings
Specifications
Storage
Battery
* If the Inventio-HD Pro is unresponsive or the blue LED light
blinks rapidly, this is often an indication that the battery needs
to be charged
USER MANUAL
www.spytecinc.com