Squareled Froggy User Manual - 7. Attention:
Manual | Froggy 10W Miniatur LED Movinghead
7. Attention:
How to set master-slave without connecting to DMX
1.The Sound Master-slave : Link all fixtures. Don’t connect the DMX Controller, set the address
to A001, choose one fixture as Master, and set the one to Sound model(so 1,so 2). Then sound
master-slave mode is achieved.
2. The Auto program Master-slave : Link all fixtures. Don’t connect the DMX Controller,set address
to A001, choose one as Master , and set to Auto model(de 1,de 2...de 9). Then auto master-slave
mode is achieved .
Set DMX address
Display the DMX 512 value of each channel.With this function you can display the DMX 512 value of
each channel. The display automatically shows the channel with a value changing.
Synchronization & master /slave mode
Take some items and connect them by DMX cables, disconnect the items from DMX
controller, the items will wok synchronously, one as master, the others as slave.
Auto Program
With this function, you can run the internal program. You can select the desired program
under.You can set the number of steps under .You can edit the individual scenes
under .With this function, you can run the individual scenes either automatically, i.e. with
the adjusted Step-Time.
Error message
When you turn on the fixture, it will make a reset first. The display may show XXer while there are
problems with one or more channels. XX stands for channel1, 2, 3,etc who has the testing sensor for
positioning.
For example,when the display shows Red Er , it means there is some error in channel 1,If there are
some errors on channel 1, channel 2, channel 5 at the same time, you may see the error message
Red Color Er , Green Er ,Pan Er flash repeated for 5 times, and then the fixture will generate a reset
signal, all the stepper reset.
(4,8 Pt)If the fixture remain error message after performing reset more than 3 times, it will detect
whether the fixture has more than 3 errors. If the fixture has more than 3 errors (including 3 errors),
all the channels can not work properly; but if the fixture has less than 3 errors, only the channels
which have errors can not work properly, others can work as usual.