Squirrel ATC User Manual

Summary of ATC

  • Page 1

    1 contents 3d compression inlet ..............................................................................................................................................3 zipper bungees ................................................................................................................

  • Page 2

    2 before you base, skydive. Before you get too crazy with your atc, train! Even our most experienced team pilots need many skydives (10, 20, 30+, perhaps!) before they feel comfortable and confident in new wingsuits. These are guys with 10+ years of experience, thousands of skydives, and over 1000 b...

  • Page 3: 3D Compression Inlet

    Keep zippers close against mlw webbing. Handles completely exposed. Zippers tight against mlw. 3 3d compression inlet zipper bungees use care and feeding of your squirrel the 3d compression inlet is an advanced and effective innovation, however it does require some care and maintenance. It is extrem...

  • Page 4: Lateral Pass-Through

    Lateral passes through. Position lateral and skip tabs. Lateral pass-through back view. 4 lateral pass-through arm foam options nutsack the one-zip system of the atc features a “piano-hinge” style closure around the lateral webbing of your skydiving harness. When you place your leg strap inside the ...

  • Page 5: Mylar

    5 mylar leg wing zipper pulls arm and leg wing internal zippers hook knife the mylar at your leading edge will become creased and worn over time. Wrinkling and creasing of this material is normal and will not negatively affect your flight. You should, however, take care to minimize the creasing by p...

  • Page 6: Holding Your Gripper,

    Position for belly flight. Palm rests against arm wing end cell. Gripper provides structure. Hand “palms” arm wing end cell. 6 holding your gripper, and positioning the leading edge of your suit holding your grippers correctly is an important part of controlling your atc. It is not necessary to hold...

  • Page 7

    7 bad: all of these positions are very wrong. Please note how they deform the shape of the leading edge and twist the zipper into a non-straight line. The leading edge is rolled forward, the sweep of the wing is changed, and the bottom surface is not clean. All of these positions will result in decr...

  • Page 8: Contact Us

    8 if you have any questions about any product that we make, please do not hesitate to contact us. Contact us thank you for flying squirrel! Www.Squirrel.Ws fly@squirrel.Ws +1-855-fly-sqrl v.201702 - check the atc product page at www.Squirrel.Ws for the latest pdf version of this manual..