Squirrel Swift 3 User Manual

Summary of Swift 3

  • Page 1

    1 contents 3d compression inlet ..............................................................................................................................................3 arm foam options ..............................................................................................................

  • Page 2

    2 before you base, skydive. Before you get too crazy with your swift 3, train! Please take your responsible progression seriously: skydive your wingsuit extensively before you base jump it, and train in your wingsuit extensively before you attempt any advanced maneuvers. The swift 3 is designed for ...

  • Page 3: 3D Compression Inlet

    Lateral passes through inside. Lateral pass-through back view. 3 3d compression inlet use, care, and feeding of your squirrel the 3d compression inlet is an advanced and effective innovation, however it does require some care and maintenance. Try not to store your suit in a tightly packed configurat...

  • Page 4: Zipper Bungees

    Keep zippers close against mlw webbing. Handles completely exposed. Zippers tight against mlw. 4 zipper bungees the bungees that hold the zippers tight to the main lift webbing (mlw) of your harness must always be connected. Do not jump your suit without the zipper bungees set tightly around your ha...

  • Page 5: Custom Internal Pressure

    5 custom internal pressure the swift 3 is designed to allow you to choose the amount of internal pressure in the arm wings. Some pilots like full pressure (zips closed) and some like minimum pressure (zips all the way open). The difference is primarily how easy it is to bend your arm at the elbow wh...

  • Page 6: Grippers

    6 position for belly flight. Palm rests against arm wing end cell. Gripper provides structure. Hand “palms” arm wing end cell. Grippers holding your grippers correctly is an important part of controlling your swift 3. It is not necessary to hold the gripper itself, tightly. Here are some examples of...

  • Page 7: Mylar

    7 mylar leg wing zipper pulls hook knife the mylar at your leading edge will become creased and worn over time. Wrinkling and creasing of this material is normal and will not negatively affect your flight. You should, however, take care to minimize the creasing by packing your suit with care. Always...

  • Page 8: Contact Us

    8 if you have any questions about any product that we make, please do not hesitate to contact us. Contact us thank you for flying squirrel! Www.Squirrel.Ws fly@squirrel.Ws +1-855-fly-sqrl v.201802 - check the swift 3 product page at www.Squirrel.Ws for the latest pdf version of this manual..