SR Suntour AURON Owner's Manual - Maintenance Plan
10
MAINTENANCE PLAN
Ì
after every ride: Clean the fork tubes and dust seals and maintain with an oily cloth / check
stanchion tubes for scratches
Ì
every 50 hours: Maintenance 1 (at dealer)
Ì
every 100 hours or once a year: Maintenance 2 (at dealer, ideally before winter time in order to
protect all parts from the effects of weather by proper greasing)
MAINTENANCE 1:
Check function of fork / check torques of mountings screws and nuts at dropout (10 Nm) / check
for scratches, dents, cracks, discolouration, signs of wear and signs of minor corrosion (main-
tain with oily cloth).
MAINTENANCE 2:
Maintenance 1 + disassembly / cleaning the entire fork inside and out / cleaning and lubricating
dust seals and slider sleeves / checking torques / adjusting to the riders liking.
Before disassembly, check the slider sleeve play of the fork. To do so, apply the front wheel
brake and gently push the bicycle back and forth at the handlebar stem shaft. Replace the slider
sleeves if the play is too big (more than 1 mm at the fork brace).
TrAVEL ADJUST FUNCTION
This function allows you to continuously reduce the suspen-
sion travel of the fork by up to 40 mm. In this version, the
valve cap is located at the bottom end of the bottom case.
reduce travel:
1. Press and hold the button
2. Compress the fork
3. release the button
Extend travel:
1. Press and hold the button
2. relieve the fork
WEB LINKS
For further information please visit our website: www.srsuntour-cycling.com.
There you will also find:
Ì
Service request:
http://www.srsuntour-cycling.com/service/service-request
Ì
Product registration:
http://www.srsuntour-cycling.com/service/product-registration
Ì
Tech videos:
http://www.srsuntour-cycling.com/service/tech-videos
Ì
Download area:
http://www.srsuntour-cycling.com/service/download-area
Ì
Fork glossary:
http://www.srsuntour-cycling.com/service/fork-glossary