SR Suntour M2025 Owner's Manual - page 26
18
19
:$51,1*$QLQVXI¿FLHQWO\WLJKWHQHGVWHPFODPSEROW
handlebar clamp bolt or bar end extension clamping bolt may
compromise steering action, which could cause you to lose
control and fall. Place the front wheel of the bicycle between
your legs and attempt to twist the handlebar/stem assembly. If
you can twist the stem in relation to the front wheel, turn the
handlebars in relation to the stem, or turn the bar end
extensions in relation to the handlebar, the bolts are
LQVXI¿FLHQWO\WLJKWHQHG
D. Control Position Adjustments
The angle of the brake and shift control levers and their position on the
handlebars can be changed. Ask your dealer to make the adjustments
IRU\RX,I\RXFKRRVHWRPDNH\RXURZQFRQWUROOHYHUDQJOHDGMXVWPHQW
EHVXUHWRUHWLJKWHQWKHFODPSIDVWHQHUVWRWKHUHFRPPHQGHGWRUTXH
$SSHQGL['RUWKHPDQXIDFWXUHU¶VLQVWUXFWLRQV
E. Brake Reach
0DQ\ELNHVKDYHEUDNHOHYHUVZKLFKFDQEHDGMXVWHGIRUUHDFK,I\RXKDYH
VPDOOKDQGVRU¿QGLWGLI¿FXOWWRVTXHH]HWKHEUDNHOHYHUV\RXUGHDOHUFDQ
HLWKHUDGMXVWWKHUHDFKRU¿WVKRUWHUUHDFKEUDNHOHYHUV
WARNING: The shorter the brake lever reach, the more critical it
is to have correctly adjusted brakes, so that full braking power
can be applied within available brake lever travel. Brake lever
WUDYHOLQVXI¿FLHQWWRDSSO\IXOOEUDNLQJSRZHUFDQUHVXOWLQORVV
of control, which may result in serious injury or death.
WARNING: A quill stem’s Minimum Insertion Mark must not be
visible above the top of the headset. If the stem is extended
beyond the Minimum Insertion Mark the stem may break or
damage the fork’s steerer tube, which could cause you to lose
control and fall.
WARNING: On some bicycles, changing the stem or stem
height can affect the tension of the front brake cable, locking
the front brake or creating excess cable slack which can make
the front brake inoperable. If the front brake pads move in
towards the wheel rim or out away from the wheel rim when the
stem or stem height is changed, the brakes must be correctly
adjusted before you ride the bicycle.
6RPHELF\FOHVDUHHTXLSSHGZLWKDQDGMXVWDEOHDQJOHVWHP,I\RXUELF\FOH
KDVDQDGMXVWDEOHDQJOHVWHPDVN\RXUGHDOHUWRVKRZ\RXKRZWRDGMXVW
LI'RQRWDWWHPSWWRPDNHWKHDGMXVWPHQW\RXUVHOIDVFKDQJLQJVWHPDQJOH
PD\DOVRUHTXLUHDGMXVWPHQWVWRWKHELF\FOH¶VFRQWUROV
WARNING: Always tighten fasteners to the correct torque. Bolts
that are too tight can stretch and deform. Bolts that are too
loose can move and fatigue. Either mistake can lead to a
sudden failure of the bolt, causing you to lose control and fall.
Your dealer can also change the angle of the handlebar or bar end
extensions.
WARNING: Some people have claimed that extended riding
with a saddle which is incorrectly adjusted or which does not
support your pelvic area correctly can cause short-term or
long-term injury to nerves and blood vessels, or even
impotence. If your saddle causes you pain, numbness or other
discomfort, listen to your body and stop riding until you see
your dealer about saddle adjustment or a different saddle.
&+DQGOHEDU+HLJKWDQG$QJOH
YRXUELNHLVHTXLSSHGHLWKHUZLWKD³WKUHDGOHVV´VWHPZKLFKFODPSVRQWR
WKHRXWVLGHRIWKHVWHHUHUWXEHRUZLWKD³TXLOO´VWHPZKLFKFODPSVLQVLGH
WKHVWHHUHUWXEHE\ZD\RIDQH[SDQGLQJELQGHUEROW,I\RXDUHQ¶WDEVROXWHO\
VXUHZKLFKW\SHRIVWHP\RXUELNHKDVDVN\RXUGHDOHU
,I\RXUELNHKDVD³WKUHDGOHVV´VWHP
¿J\RXUGHDOHUPD\EHDEOHWRFKDQJHKDQGOHEDUKHLJKWE\PRYLQJ
KHLJKWDGMXVWPHQWVSDFHUVIURPEHORZWKHVWHPWRDERYHWKHVWHPRUYLFH
YHUVD2WKHUZLVH\RX¶OOKDYHWRJHWD
stem of different length or rise. Consult
\RXUGHDOHU'RQRWDWWHPSWWRGRWKLV
\RXUVHOIDVLWUHTXLUHVVSHFLDONQRZOHGJH
,I\RXUELNHKDVD³TXLOO´VWHP¿J
you can ask your dealer to adjust the
handlebar height a bit by adjusting stem
height.
$TXLOOVWHPKDVDQHWFKHGRUVWDPSHG
PDUNRQLWVVKDIWZKLFKGHVLJQDWHVWKH
VWHP¶V³0LQLPXP,QVHUWLRQ´RU³0D[LPXP
([WHQVLRQ´7KLVPDUNPXVWQRWEHYLVLEOH
above the headset.
WARNING: When making saddle angle adjustments with a
single bolt saddle clamp, always check to make sure that the
serrations on the mating surfaces of the clamp are not worn.
Worn serrations on the clamp can allow the saddle to move,
causing you to lose control and fall.
Always tighten fasteners to the correct torque. Bolts that are
too tight can stretch and deform. Bolts that are too loose can
move and fatigue. Either mistake can lead to a sudden failure of
the bolt, causing you to lose control and fall.
Note:
,I\RXUELF\FOHLVHTXLSSHGZLWKDVXVSHQVLRQVHDWSRVWWKH
VXVSHQVLRQPHFKDQLVPPD\UHTXLUHSHULRGLFVHUYLFHRUPDLQWHQDQFH$VN
your dealer for recommended service intervals for your suspension seat
post.
Small changes in saddle position can have a substantial effect on
SHUIRUPDQFHDQGFRPIRUW7R¿QG\RXUEHVWVDGGOHSRVLWLRQPDNHRQO\RQH
adjustment at a time.
WARNING: After any saddle adjustment, be sure that the saddle
adjusting mechanism is properly seated and tightened before
riding. A loose saddle clamp or seat post clamp can cause
damage to the seat post, or can cause you to lose control and
fall. A correctly tightened saddle adjusting mechanism will
allow no saddle movement in any direction. Periodically check
to make sure that the saddle adjusting mechanism is properly
tightened.
,ILQVSLWHRIFDUHIXOO\DGMXVWLQJWKHVDGGOHKHLJKWWLOWDQGIRUHDQGDIW
position, your saddle is still uncomfortable, you may need a different saddle
design. Saddles, like people, come in many different shapes, sizes and
UHVLOLHQFH