- DL manuals
- SSS Siedle
- Intercom System
- AS-Ta-64/1
- System Manual
SSS Siedle AS-Ta-64/1 System Manual
Summary of AS-Ta-64/1
Page 1
System manual 1+n technology issue 2013.
Page 2
2 contents 1 1+n technology system description 3 2 safety remarks 3 3 configuration, conductor lengths 1+n technology 4-5 overview 6 4 device overview door loudspeakers, call buttons 8 door station 9 power supply, line rectifiers 10 controller 11 doorcom 12 in-house telephones, accessories 13 5 inst...
Page 3
3 1 1+n technology system description 2 safety remarks wire-saving 1+n technology configuration the wire-saving 1+n system is based on an installation with a common core and a call core ãn“ for each user which links the bell button at the front door directly to each in- house telephone. Using these ...
Page 4
4 configuration of the 1+n system the basic installation is performed as a side circuit installation.The door stations and in-house telephones are routed to the sub-distributor. Installation can be performed as a star, tree or bus structure. The door station and in-house telephones are linked by mea...
Page 5
5 for the entire conductor length in the 1+n system, the following applies: with cable material yr or j-y(st)y with 0.8 mm diameter • max. 500 m/1640 ft between the door station and the most distant in- house telephone • max. 100 m/328 ft between the line rectifier and the most distant door station ...
Page 6
6 3 configuration, conductor lengths overview secondary signal unit a secondary signal unit ns 711-… can be connected in parallel to an in-house telephone in order to additionally signal the call in another room. A maximum of 1 secondary signal unit can be connected to an in-house telephone. Seconda...
Page 7
7.
Page 8
8 4 device overview door loudspeakers, call buttons tlm 612-02 door loudspeaker module for the wire-saving 1+n system. Front louvre made of weather- and uv-proof polycarbonate, tropical- ized loudspeaker, long-life electret microphone with volume controller for loudspeaker. With integrated switching...
Page 9
9 4 device overview door station siedle classic cl a 01 n-02 - cl a 08 n-02 door station with stainless steel front. Door loudspeaker and illu- minated call buttons. Integrated door release contact (dr), contact load max. 15 v ac, 30 v dc, 2a, switching time dr fixed at 3 sec- onds. Current consumpt...
Page 10
10 4 device overview power supply, line rectifiers controller ng 602-... Bus line rectifier in a 6-grid housing. Primary: 230 v ac, 50/60 hz secondary: 12 v ac, 1.6 a and 23.3 v dc - 0.3 a stabilized. Supply to the 1+n system, door release and lighting for the call button modules. Gc 612-... Group c...
Page 11
11 4 device overview controller etc 602-... Storey controller in 6-grid housing for connection to one or more storey door stations. During a call from a storey door station to an in-house telephone, an additional call can be routed from a main door station to another in-house telephone. Supply 24 v ...
Page 12
12 dca 612-... Doorcom-analog for connection of one or more door stations to an analog pbx extension of a telephone system. Up to 3 call buttons can be connected. 12 v ac supply to terminals b/c, connection to the 1+n system using cores 1 and 7.1-7.3. Zr 502-... Time relay zr 502-0 in a 3-grid housi...
Page 13
13 4 device overview in-house telephones, accessories hts 811-0 standard in-house telephone with the functions: • calling, speech, door release and storey call • door release and light button • rotary controller for ring tone volume with integrated muting • door call as 3-tone call, storey call as 2...
Page 14
14 steuerung 5 door station installation door station installation the door loudspeaker module (tlm 612-… and call button module tm 612-…) are each inserted in the relevant terminal block. The circuit diagram illustrates the two terminal blocks of the tlm 612-… and tm 612-… when switching several do...
Page 15
15 block diagram of the call button module tm 612-1 • in the idle status, the in-house telephone is supplied with power via the terminal +. • potential-free call contact between terminal 6 and 7.1 • the audio privacy device in the door loudspeaker is actuated and communication takes place via ter- m...
Page 16
16 5 installation as-ta-64/1 siedle vario remarks appliance requir ement.
Page 17
17 as-ta-64/1 siedle vario functional calling and speech between the door station and connected in-house telephones hts/htc 811-… an existing call cannot be listened in to from other in-house telephones. Internal speech communication between the htc 811-…, which is connected to the gc 612-… dialling...
Page 18
18 5 installation as-ta-64/1 siedle custom-fit door loudspeaker remarks appliance requir ement siedle custom-fit door loudspeaker.
Page 19
19 as-ta-64/1 siedle custom-fit door loud- speaker functional calling and speech between the door station and connected in-house telephones hts/htc 811-… an existing call cannot be listened in to from other in-house telephones. Internal speech communication between the htc 811-…, which is connected ...
Page 20
20 5 installation as-ta-64/1 siedle classic remarks buttons appliance requir ement.
Page 21
21 as-ta-64/1 siedle classic functional calling and speech between the door station and connected in-house telephones hts/htc 811-… an existing call cannot be listened in to from other in-house telephones. Internal speech communication between the htc 811-…, which is connected to the gc 612-… dialli...
Page 22
22 5 installation as-ta-64/1 siedle steel remarks buttons appliance requir ement.
Page 23
23 as-ta-64/1 siedle steel functional calling and speech between the door station and connected in-house telephones hts/htc 811-… an existing call cannot be listened in to from other in-house telephones. Internal speech communication between the htc 811-…, which is connected to the gc 612-… dialling...
Page 24
24 5 installation as-ta-64/1 siedle vario with doorcom analog dca 612-… tr 603-... Remarks appliance requir ement analog telephone connection to tbr 21.
Page 25
25 as-ta-64/1 siedle vario with doorcom analog dca 612-… functional calling and speech between the door station and connected in-house telephones hts/htc 811-… an existing call cannot be listened in to from other in-house telephones. Door release button for the door release function, light button fo...
Page 26
26 5 installation as-ta-64/2 siedle vario with 2 door stations remarks appliance requir ement.
Page 27
27 as-ta-64/2 siedle vario with 2 door stations functional calling and speech between the door station and connected in-house telephones hts/htc 811-… an existing call cannot be listened in to from other in-house telephones. Internal speech communication between the htc 811-…, which is connected to ...
Page 28
28 5 installation as-ta-64/2 siedle custom-fit door loudspeaker with 2 door stations remarks appliance requir ement siedle custom-fit door loudspeaker siedle custom-fit door loudspeaker.
Page 29
29 as-ta-64/2 siedle custom-fit door loudspeaker with 2 door stations functional calling and speech between the door station and connected in-house telephones hts/htc 811-… an existing call cannot be listened in to from other in-house telephones. Internal speech communication between the htc 811-…, ...
Page 30
30 5 installation as-ta-64/3 siedle vario with 3 door stations remarks appliance requir ement.
Page 31
31 as-ta-64/3 siedle vario with 3 door stations functional calling and speech between the door station and connected in-house telephones hts/htc 811-… an existing call cannot be listened in to from other in-house telephones. Internal speech communication between the htc 811-…, which is connected to ...
Page 32
32 5 installation as-ta-74/1 siedle vario, internal speech communication remarks appliance requir ement.
Page 33
33 as-ta-74/1 siedle vario, internal speech communication functional calling and speech between the door station and connected in-house telephones htc 811-… an existing call to the door station cannot be listened in to from other in-house telephones. Internal speech communication between the htc 811...
Page 34
34 5 installation as-ta-84/1 siedle vario 1 main door station, 1 storey door station remarks appliance requir ement.
Page 35
35 as-ta-84/1 siedle vario 1 main door station, 1 storey door station functional calling and speech between the door station and connected in-house telephones hts/htc 811-… an existing call cannot be listened in to from other in-house telephones. Door release button for the door release function, li...
Page 36
36 5 installation as-ta-85/1 siedle vario 1 main door station, 1 storey door station, internal speech communication remarks appliance requir ement.
Page 37
37 as-ta-85/1 siedle vario 1 main door station, 1 storey door station, internal speech communication functional calling and speech between the door station and connected in-house telephones hts/htc 811-… an existing call cannot be listened in to from other in-house telephones. Internal speech commun...
Page 38
38 5 installation as-ta-94/1 siedle vario, group switching with internal speech communication remarks appliance requir ement.
Page 39
39 as-ta-94/1 siedle vario, group switching with internal speech communication functional calling and speech between the door station and connected in-house telephones hts/htc 811-… an existing call cannot be listened in to from other in-house telephones. Internal speech communication between the ht...
Page 40
40 6 supplementary functions group controller gc 612-… the group controller gc 612-… in the 6-grid housing is used for the connection of a group of max. 6 in-house telephones htc 811-… in-house telephones connected to the group controller the buttons 1–6 can be used to call and communi- cate with ot...
Page 41
41 3 sek. 3 sek. Application assignment of door call inputs 7.1–7.6 to in-house telephones 1–6. When reprogramming door calls, the same applies to new programming, i.E. The existing programming is overwritten. Activate the programming mode at the gc 612-…, the status led starts to flash. The call bu...
Page 42
42 6 supplementary functions switching/remote controller sfc 602-… the switching/remote controller in a 3-grid housing is used to execute a maximum åof 4 central switching and control functions (connection to the door loudspeaker) or 4 local switching and control functions (connection to group contr...
Page 43
43 connection of an sfc 602‑… in the circuit as‑ta/64‑1. All connected in‑house telephones can initiate switching functions of the sfc 602‑… remarks appliance requirement.
Page 44
44 6 supplementary functions storey controller etc 602-… the storey controller in the 6-grid housing is used to connect a storey door station. Up to a maximum of 7 storey door stations can be con- nected to a storey controller. In addition to a call with the main door station in the side circuit, a ...
Page 45
45 6 supplementary functions secondary signal controller nsc 602-… using the secondary signal controller nsc 602-… an additional secondary signal unit or a radio chime can be actuated in parallel with the door and storey call. There are 2 poten- tial-free work contacts available for this purpose whi...
Page 46
46 6 supplementary functions controller door release ctÖ 602-… the controller door release ctÖ 602-… is used to actuate a door release from the subdistributor. This installation is used if the con- necting wires are not connected in the housing of the door station for safety reasons. Connection of t...
Page 47
47 as-ta-64/2 with ctÖ 602-… both door releases have a tamper- proof connection. The mode of operation and func- tional characteristics are identical to as-ta-64/2 on page 28. Appliance requirement remarks.
Page 48
48 6 supplementary functions parallel switching in-house telephones parallel switching hts/ htc 811-… using 1+n technology, a maximum of 2 in-house telephones can be operated in parallel. Accessories nsc 602-… and ns 711-… also count as parallel devices. Via a gc 612-… it is possible to call up to 6...
Page 49
49 6 supplementary functions pilfer safeguard dsc 602-… pilfer safeguard for vario mod- ules bistable magnet for integration in mounting frame mr 611-… application to secure valuable modules such as camera modules, code lock modules or to ensure tamper-proof operation of the door release. A stable m...
Page 50
50 6 supplementary functions staircase light/outside light light actuation using the light button in in-house telephones hts/ htc 811-… the light contact is closed in the door loudspeaker for 0.8 seconds. The reference for this contact is terminal c. Pick-up at terminal li. Following completion of t...
Page 51
51 6 supplementary functions led actuation, potential-free buttons leds the in-house telephones htc 811-… are equipped with two leds. The leds are located under the buttons 3 and 4, actuation can take place using direct or alternating voltage. • la1 and la2: 10–15 v ac, max. 10 ma • la1 and la2: 15 ...
Page 52
52 entfällt 7 servicing exchange/extension the in-house telephones hts/ htc 811-… can be used in existing 1+n systems with the predecessor models hts/htc 711-… exchange of hts/htc 711-… units for hts/ htc 811-… units is possible. The terminal designations of the in- house telephones are identical. T...
Page 53
53.
Page 54
54 7 servicing measured values measured values in the 1+n system, for measurement using a digital multimeter idle status voltage door station terminal 1 and 7… voltage in-house telephone terminal 1 and 7 description 22–24 v dc 0 v dc no in-house telephone connected, core interrupted, in-house teleph...
Page 55
55 classic cl … 9, 20 comparison 52 conductor length 4 control functions 11, 42, 51 diode accessory 8 door loudspeaker 8-9, 14-15 door release 6 doorcom analog 12, 24 ert 6 exchange 52 group controller 10, 32 internal call 32 internal speech 32 led actuation 51 led display 51 light button 6 measured...
Page 56
S. Siedle & söhne telefon- und telegrafenwerke ohg postfach 1155 78113 furtwangen bregstraße 1 78120 furtwangen telefon +49 7723 63-0 telefax +49 7723 63-300 www.Siedle.De info@siedle.De © 2006/02.15 printed in germany best. Nr. 0-1101/136442 en.