1. DL manuals
  2. SSS Siedle
  3. Intercom System
  4. BFS 850-0
  5. System manual

SSS Siedle BFS 850-0 System manual

Manual is about: In-Home bus: Video. BTSV 850 series; BFSV 850 series; BTCV 850 series; BTS 850 series; BFS 850 series; BTC 750 series; BNS 750 series; BSE 650 series; BEM 650 series; BSM 650 series; CL V xx B-01 series; BVA 650 series; DCA 650 series; DCI 600 series;

Summary of BFS 850-0

  • Page 1

    System manual in-home bus: video issue 2007.

  • Page 2

    2 2 1 in-home bus: video system description 3 2 safety remarks 3 3 configuration, conductor lengths single line system 4-5 single line system with bus distributor 6-7 multiple line system 8-9 calculation example 10 installation with j-y(st)y 11 increased range operating mode 11 bus distributor 12-13...

  • Page 3

    3 3 siedle-in-home: video single line system configuration the in-home bus: video features the same basic structure as a siedle- in-home bus: audio installation. Here too, the installation comprises a two-core line. The essential difference to the in-home bus: audio is supplementary transmission of ...

  • Page 4

    4 4 configuration of in-home: video the basic siedle-in-home bus installation type is the single line system. Within this one line, installation takes place from one device to the next, provided this is allowed by the building installation. In buildings with a side circuit and individual branches in...

  • Page 5

    5 5 devices occupying 1 user btsv 850-... Bfsv 850-... Btcv 850-... Bts 850-... Bfs 850-... Btc 850-... Bns 750-... Bse 650-... Bem 650-... Bsm 650-... Devices occupying 2 users btlm 650-03 btle 050-03 cl v xx b-01 stl ... Bva 650-... Devices with variable user assignment (depending on programming) ...

  • Page 6

    6 conductor length with bus distributor if the use of bus distributors is necessary for installation, in addition to the maximum range, attenuation of the bus distributors and conductor material must be additionally taken into account. The following information relating to conductor lengths refers t...

  • Page 7

    7 conductor length with bus distributor and zbvng 650-... The zbvng 650-... Accessory amplifies the video signal, so permitting greater attenuation in the camera branch and monitor branch. To do this, the inserted jumper card in the bvng 650-... Is removed and the zbvng 650-... Inserted in the same ...

  • Page 8

    8 3 configuration, conductor lengths multiple line system line 1 line 2 line 15.

  • Page 9

    9 structure of a multiple line system a multiple line system comprises individual lines which are linked together by two cores. The lines are connected at the bus video line rectifier using terminals sav and sbv. In multiple line systems, speech and video connections are possible from one line to an...

  • Page 10

    10 example to determine the attenuation with bus distributor the system is installed using yr cable 0.8 mm diameter. This means that 10 m of conductor length have an attenuation of 2 db. Apartment 4 is decoupled using a bus audio decoupler baa 650-... , apartment 1 - apartment 3 are connected via bu...

  • Page 11

    11 increased range operating mode the zbvng 650-... Must be plugged into the bvng 650-...! When using cable material j-y(st)y with 0.8 mm, it is possible to increase the distance from the bus video line rectifier to the bus telephones with colour monitor. In this case, each bus telephone with colour...

  • Page 12

    12 camera branch: no bus distributor required with a door station. Monitor branch: no bus distributor required when looping through from bus telephone to bus telephone. The integrated bus distributor in the bus telephones is used. Attenuation: no attenuation to be considered. Baa 650-... In the came...

  • Page 13

    13 baa 650-... In the camera branch bvvs 650-... In the camera branch bvvu 650-... In the camera branch baa 650-... In the monitor branch bvvs 650-... In the monitor branch bvvu 650-... In the monitor branch application connection of a door station without video (e.G. Btlm 650/ btle 050) or switchin...

  • Page 14

    14 btlm 650-03 bus door loudspeaker module for in- home bus. Loudspeaker and microphone integrated, illuminated light button, integrated door release contact (dr) contact load max. 15 v ac, 30 v dc, 2 a, switching time dr fixed at 3 seconds. Acoustic feedback when actuating the call buttons. Btm 650...

  • Page 15

    15 siedle classic cl v 01 b-01 - cl v 04 b-01 door station with stainless steel front. Door loudspeaker, illuminated call buttons and bus camera. Integrated door release contact (dr), contact load max. 15 v ac, 30 v dc, 2 a, switching time dr fixed at 3 seconds. Current consumption led lighting for ...

  • Page 16

    16 bcmc 650-... Bus colour camera module for siedle-in-home bus: video. Integrated 2-step heating, day/night switching, infrared lighting and video signal converter. Supply via siedle in-home bus: video, heating supply 12 v ac, 100 ma. Cec 612-... External colour camera day/night ccd video camera fo...

  • Page 17

    17 baa 650-... Bus audio decoupling for connection of audio users such as bfs 850-..., bts 850-..., btc 850-..., dca 650-... Or switching and control devices within in-home: video. Screw terminals for bus input, looped bus throughput and connection of audio users. Bvvu 650-... Asymmetrical bus video...

  • Page 18

    18 ng 602-... Bus line rectifier in a 6-grid housing. Primary: 230 v ac, 50/60 hz secondary: 12 v ac, 1.6 a and 23.3 v dc - 0.3 a stabilized. For additional power supply to a btsv/bfsv/btcv 850-... In case of parallel door calls. 4 in-home: video users power supply, line rectifiers bvng 650-0 bus vi...

  • Page 19

    19 4 in-home: video users switching, control bim 650-... Bus interface module in 3-grid housing. Establishes a connection between siedle-in-home and the vario bus. Is required in order to call bus telephones via code lock module com 611-... Or display call module drm 611-... Bsm 650-... Bus switchin...

  • Page 20

    20 4 in-home: video users pc interface, doorcom pri 602-... Programming interface for connection of a windows pc via serial interface to the vario bus. The vario bus is programmed using programming software prs 602-..., provided with the delivery. If the bim 650-... Is additionally used, the in-home...

  • Page 21

    21 4 in-home: video users bus telephones bts 850-0 standard bus telephone. Connection at bus cores ta and tb. • calling, speech, door release and storey call • door release and light button • internal speech communication • 10 ring tones • call and speech volume can be modified in 5 stages • silenci...

  • Page 22

    22 btcv 850-... Deluxe bus telephone with colour monitor. Connection at bus cores tam and tbm. • calling, speech, vision, door release and storey call • colour monitor 8.8 cm (3.5") • door release and light button • internal speech communication • 11 ring tones including chime • call and speech volu...

  • Page 23

    Bns 750-... Bus secondary signal unit, for signalling door and storey door calls in another room or corridor. Connection to in-home bus: audio call volume steplessly adjustable up to max. 86 db(a). Call differentiation for door calls and storey calls. Connection to in-home: video only via baa 650-.....

  • Page 24

    24 ztsv 850-... Standard table-top accessory for converting bus house telephone btsv/bfsv 850-... From a wall to a table-top unit. Connection of the table unit to an 8-pin telecom socket 8 (8) junction box. Ztcv 850-... Deluxe table-top accessory for the bus telephone btcv 850-... Conversion from a ...

  • Page 25

    25 bus call button module connection of the bus call button modules to the bus door loudspeaker via ribbon cable. The name plate lighting is supplied from the terminal block of the btlm 650-03. The number of bus call button modules which can be illuminated depends on the overall load of the tr 603-....

  • Page 26

    26 5 installation as-tvha-1/1 siedle vario.

  • Page 27

    27 as-tvha-1/1 siedle vario mode of operation calling, speech and video between the door station and the connected bus telephones btsv/bfsv/ btcv 850-... With colour monitor. Audio and video privacy of existing calls is assured. Door release button for the door release function, light button for the...

  • Page 28

    28 5 installation as-tvha-1/1 siedle vario with bvvu 650-... Loop-through connection fo r n o te s o n t h e w ir in g d ia g ra m , se e t h e p re vi o u s p a g e.

  • Page 29

    29 5 installation as-tvha-1/1 siedle vario with bvvu 650-... Star-shaped installation fo r n o te s o n t h e w ir in g d ia g ra m , se e t h e p re vi o u s p a g e.

  • Page 30

    30 5 installation as-tvha-1/1 siedle custom-fit door loudspeaker.

  • Page 31

    31 as-tvha-1/1 siedle custom-fit door loudspeaker mode of operation calling, speech and video between the door station and the connected bus telephones btsv/bfsv/ btcv 850-... With colour monitor. Audio and video privacy of existing calls is assured. Door release button for the door release function...

  • Page 32

    32 5 installation as-tvha-1/1 siedle classic.

  • Page 33

    33 as-tvha-1/1 siedle classic mode of operation calling, speech and video between the door station and the connected bus telephones btsv/bfsv/ btcv 850-... With colour monitor. Audio and video privacy of existing calls is assured. Door release button for the door release function, light button for t...

  • Page 34

    34 5 installation as-tvha-1/1 siedle steel.

  • Page 35

    35 as-tvha-1/1 siedle steel mode of operation calling, speech and video between the door station and the connected bus telephones btsv/bfsv/ btcv 850-... With colour monitor. Audio and video privacy of existing calls is assured. Door release button for the door release function, light button for the...

  • Page 36

    36 5 installation as-tvha-1/2 siedle vario.

  • Page 37

    37 as-tvha-1/2 siedle vario 2 door stations mode of operation calling, speech and video between the door station and the connected bus telephones btsv/bfsv/ btcv 850-... With colour monitor. Audio and video privacy of existing calls is assured. The door release button for the door release function f...

  • Page 38

    38 5 installation as-tvha-2/1 multiple line system.

  • Page 39

    39 as-tvha-2/1 multiple line system mode of operation calling, speech and video between the door station and the connected bus telephones btsv/bfsv/ btcv 850-... With colour monitor. Audio and video privacy of existing calls is assured. Door release button for the door release function, light button...

  • Page 40

    40 5 installation as-tvha-1/1 call via display call module drm 611-0

  • Page 41

    41 as-tvha-1/1 call via display call module drm 611-0 mode of operation calling, speech and video between the door station and the connected bus telephones btsv/bfsv/ btcv 850-... With colour monitor. Dialling of bus telephones via the display call module. Selection of names takes place in alphabeti...

  • Page 42

    42 5 installation as-tvha-1/1 doorcom analog dca 650-....

  • Page 43

    43 as-tvha-1/1 doorcom analog dca 650-... Mode of operation calling and speech between the door station and the connected a/b telephones of a telephone system. The doorcom-analog dca 650-02 is able to forward the call from up to 31 bell buttons to a telephone system. The dca 650-02 calls the pbx ext...

  • Page 44

    44 5 installation as-tvha-1/1 additional external camera.

  • Page 45

    45 as-tvha-1/1 additional external camera mode of operation calling, speech and video between the door station and the connected bus telephones btsv/bfsv/ btcv 850-... With colour monitor. Audio and video privacy of existing calls is assured. Door release button for the door release function, light ...

  • Page 46

    46 6 installation as-tvha-1/1 audio & video.

  • Page 47

    47 as-tvha-1/1 audio & video mode of operation calling, speech and video between the door station and the connected bus telephones btsv/bfsv/ btcv 850-... With colour monitor. Calling and speech between the door station and the connected bus telephones bts/bfs/btc 850-... An existing call can not be...

  • Page 48

    48 6 installation as-tvha-1/2 audio & video.

  • Page 49

    49 as-tvha-1/2 audio & video mode of operation calling, speech and video between the door station and the connected bus telephones btsv/bfsv/ btcv 850-... With colour monitor. Call and speech functions from the door station without video. Audio and video privacy of existing calls is assured. Via baa...

  • Page 50

    50 6 installation as-tvha-2/1 audio & video.

  • Page 51

    51 as-tvha-2/1 audio & video mode of operation calling, speech and video between the door station and the connected bus telephones btsv/bfsv/ btcv 850-... With colour monitor. Calling and speech between the door station and connected bus telephones bts/bfs/btc 850-... Audio and video privacy of exis...

  • Page 52

    52 functions with siedle-in-home and programming possibilities. Terms used in the table are explained in detail on the right-hand side. Basic function manual plug+play pc-prog. Remarks prog. Prog. Via bps 650-... (teach-in) from v 2.00 door call yes yes yes storey call - - - functional after install...

  • Page 53

    53 dialling last door the door station from which the last call was placed can be dialled by a double click on the light button. Selection of an external camera possible (with bva 650-...). With btsv/bfsv/btcv 850-... It is also possible to dial using the monitor key. Bse groups several bus switchin...

  • Page 54

    54 procedure on principle, the in-home bus can be commissioned and programmed by one person. However, as work has to be executed both at the door loudspeaker and the bus telephone, we recommend that commissioning be carried out by two people for larger-scale projects. The in-home bus can be programm...

  • Page 55

    55 7 programming - manual activating the bus line rectifier indication at led1 function display led flashes briefly 0.02 secs. – long pause 1 secs. Etc. Pause pause pause to activate the programming mode at the bus line rectifier, the programming mode button has to be briefly pressed down. Led1 indi...

  • Page 56

    56 1 siedle vario in the case of door loudspeaker module btlm 650-... The programming mode is activated using the light button. Hold down the light button for 4 seconds until a protracted signal tone is audible. 7 programming - manual activating the bus door loudspeaker depending on the type of door...

  • Page 57

    57 6 programming - manual activating the bus telephone activate the handsfree bus telephone activating the bus telephone bus telephones are set to the programming mode using the light button. 1 the receiver must be off the hook. Repeated short tones are audible in the receiver of the bus telephone. ...

  • Page 58

    58 7 programming - manual programming door calls 1 switch on the programming mode. At the bvng 650-..., press the programming mode button briefly. The led1 flashes in a 2-second rhythm to indicate that the programming mode is active. 2 at the door station, hold down the light/programming button for ...

  • Page 59

    59 7 programming - manual programming door calls at the handsfree bus telephone 1 switch on the programming mode. At the bvng 650-..., press the programming mode button briefly. The led1 flashes in a 2-second rhythm to indicate that the programming mode is active. 2 at the door station, hold down th...

  • Page 60

    60 7 programming - manual programming door calls via the storey call button 1 switch on the programming mode. At the bvng 650-..., press the programming mode button briefly. The led1 flashes in a 2-second rhythm to indicate that the programming mode is active. 2 at the door station, hold down the li...

  • Page 61

    61 7 programming - manual door calls to several bus telephones 1 switch on the programming mode. At the bvng 650-..., press the programming mode button briefly. The led1 flashes in a 2-second rhythm to indicate that the programming mode is active. 2 at the door station, hold down the light/programmi...

  • Page 62

    62 7 programming - manual programming internal calls 1 switch on the programming mode. At the bvng 650-..., press the programming mode button briefly. The led1 flashes in a 2-second rhythm to indicate that the programming mode is active. 2 lift the receiver at the first bus telephone you wish to ena...

  • Page 63

    63 9 replace the receiver at both bus telephones. Program additional bus telephones using the same procedure or quit the programming mode. 10 switch off the programming mode at the bvng 650-... . 7 at the first bus telephone, hold down the internal call button you wish to use to call the second bus ...

  • Page 64

    64 1 switch on the programming mode. At the bvng 650-..., press the programming mode button briefly. The led1 flashes in a 2-second rhythm to indicate that the programming mode is active. 2 at the door station, hold down the light/programming button for 4 seconds. A protracted acknowledgement tone i...

  • Page 65

    65 7 programming - manual call differentiation of 2 door stations 1 switch on the programming mode. At the bvng 650-..., press the programming mode button briefly. The led1 flashes in a 2-second rhythm to indicate that the programming mode is active. 2 at the door station, hold down the light/progra...

  • Page 66

    66 7 programming - manual additional contact on the bsm 650-... 1 switch on the programming mode. At the bvng 650-..., press the programming mode button briefly. The led1 flashes in a 2-second rhythm to indicate that the programming mode is active. 2 switch the bsm 650-... To the programming mode. T...

  • Page 67

    67 7 programming - manual button of a bus telephone on the bsm 650-... Application actuation of a contact in the bsm 650-..., e.G. In order to open a garage or switch on a staircase light. 1 switch on the programming mode. At the bvng 650-..., press the programming mode button briefly. The led1 flas...

  • Page 68

    68 7 programming - manual call button of a door station on the bse 650-... 1 switch on the programming mode. At the bvng 650-..., press the programming mode button briefly. The led1 flashes in a 2-second rhythm to indicate that the programming mode is active. 2 switch the bse 650-... To the programm...

  • Page 69

    69 7 programming - manual button of a bus telephone on the bse 650-... Application actuation of additional functions such as switching on the staircase light or garage door open/shut. Switching time with manual programming 1 second. 1 switch on the programming mode. At the bvng 650-..., press the pr...

  • Page 70

    70 7 programming - manual bus secondary signal unit bns 750-... 1 switch on the programming mode. At the bvng 650-..., press the programming mode button briefly. The led1 flashes in a 2-second rhythm to indicate that the programming mode is active. 2 at the door station, hold down the light/programm...

  • Page 71

    71 6 programming - manual calling via the drm 611-... Application bus telephones are called from the door station via the display call module drm 611-... Example programming example with the handsfree bus telephone bfsv 850-... If the bus telephones 1 switch on the programming mode. At the bng 650-....

  • Page 72

    72 7 programming - plug+play basics plug+play programming offers the opportunity for those without programming experience to commission an in-home bus system. • the entire installation of all users must have been completed. The housings of the bus telephones must not yet have been closed. The plug+p...

  • Page 73

    73 bus custom-fit door loudspeaker the sequence of terminals on the bus call button matrix corresponds to the sequence of bus telephones. Terminal 7.1 = bus telephone 1 etc. Terminal 7.12 = bus telephone 12 siedle classic the sequence of terminals on the bus call button matrix corresponds to the seq...

  • Page 74

    74 7 programming - plug+play example of a 4-family home example plug+play programming 4-family home restrictions with plug+play programming • bus telephones which are already assigned to a door loudspeaker in the same line are not reprogrammed. • bus telephones which are already programmed in a diff...

  • Page 75

    75 7 programming - plug+play procedure - example 1 activate the plug+play mode at the bvng 650-..., hold down the programming mode button for 5 seconds. Led1 lights up permanently. 2 position the bus telephone in apartment 1 with the receiver down. The story call is audible as an acknowledgement, an...

  • Page 76

    76 7 programming - with pc bps 650-... And pri 602-... Usb using bus programming software bps 650-... From v 2.00 the entire function of an in-home system can be programmed using a windows pc. For connection of the pc to the in-home installation, the program. Interface pri 602-... Usb and the bus po...

  • Page 77

    77 application 1 changeover contact, e.G. For - switching the outside light - opening the garage door - staircase lighting - mounting possible in a 55/70 junction box - switching functions possible with feedback to btc/btcv 850-... - 230 v ac consumers can be switched directly functional characteris...

  • Page 78

    78 8 supplementary functions as-tvha-1/1 with switching/control functions.

  • Page 79

    79 as-tvha-1/1 siedle vario mode of operation calling and speech between the door station and connected bus telephones btsv/bfsv/btcv 850-... Audio and video privacy of existing calls is assured. Door release button for the door release function, light button for the light switching function. Pressi...

  • Page 80

    80 the door release contact (dr contact) at the bus line rectifier switches every time the door release button is pressed. Switching time fixed at 3 secs. Benefits • tamper-proof, no access from the outside. • only 4 cores to the door station. Drawbacks • the door release must be routed to the distr...

  • Page 81

    81 the dr contact in the bus video line rectifier and the door release contact in the door loudspeaker are used. The contact in the bvng 650-0 switches the door release button every time it is pressed, the contact in the door loudspeaker only at the door from which the last door call was placed. Swi...

  • Page 82

    82 8 supplementary functions parallel door call, supplementary power supply, video memory parallel door call in bus telephones with video. At the in-home bus: video can ring 1 bus telephone with colour monitor without additional supply to a bell button. With an additional direct voltage supply to bu...

  • Page 83

    83 8 supplementary functions parallel door call, supplementary power supply, video memory a maximum of 3 btsv/bfsv/ btcv 850-... Units can be supplied by a ng 602-... Line rectifier. The maximum current of the 30 v dc direct voltage from the vng 602-... Is 1100 ma. The specified ranges only apply to...

  • Page 84

    84 parallel storey call the storey call button (ert) is used to call into the apartment from an apartment door. For calls to several bus telephones, it is possible to connect the ert terminal in parallel, e.G. Office storey with 4 bus telephones and one storey call button at the storey entrance. A m...

  • Page 85

    85 8 supplementary functions supplementary contact, radio chime, pilfer safeguard supplementary contact in the btsv/bfsv/btcv 850-... The bus telephones btsv/bfsv/btcv 850-... Provide an additional contact at terminals s1/s1. Actuation of an additional signalling device such as a radio chime or opti...

  • Page 86

    86 light actuation the light button in the bus telephone btsv/bfsv/btcv 850-... Or btlm 650-... Is used to actuate the light contact in the bus line rectifiers bng/bvng 650-... Following completion of the installation, this function is active without any further programming. To actuate the staircase...

  • Page 87

    87 9 servicing restart, exchange, operating mode restarting the system a restart of the system is known as a power-on reset. Switch off the power supply to the bus line rectifier, wait for a few seconds, switch the power back on. The system restarts, and all bus users are initialized again. The syst...

  • Page 88

    88 9 servicing operating mode switch bvng 650-... Exchange the existing bvsg 650-... For the bvng 650-0 when exchanging the bvng 650-0 in an existing system for the bvsg 650-... , the setting of the operating mode switch must be noted. The setting depends on the device types installed in the existin...

  • Page 89

    89 9 servicing led displays bvng 650-0 with the two displays led1 and led2 at the bus video line rectifier, functions for operation and possible faults are indicated at the in-home bus. The following table indicates the possible displays. Etc. 0.3s 0.3s 0.3s 0.3s 0.3s 0.3s 0.3s 0.3s 0.3s 0.3s 0.3s 0...

  • Page 90

    90 measured values at the in-home bus: video, to be measured with using a digital multimeter idle status min. Max. Voltage tam/tbm (tak/tbk) at the bus line rectifier bvng 650-... 27 v dc 31 v dc voltage tam/tbm (tak/tbk) at the most distant user 19 v dc current consumption bus telephones btsv/bfsv/...

  • Page 91

    91 10 glossary index address 9, 25 as-delivered status 87 call silencing 53 classic cl ... 15, 32 commissioning 54 control functions 13, 53, 77 door call 53 door call acceptance 53 door call forwarding 53 door dialling 53 door loudspeaker 14 door release 80-81 doormatic 53 exchange 88 handsfree 21-2...

  • Page 92

    © 2007/04.07 printed in germany order no. 0-1101/036980 gb s. Siedle & söhne postfach 1155 d-78113 furtwangen bregstraße 1 d-78120 furtwangen tel. +49 7723 63-0 fax+49 7723 63-300 www.Siedle.De info@siedle.De.