Igw/400-uart wlan device server hardware reference ssv embedded systems heisterbergallee 72 d-30453 hannover phone: +49 (0)511/40 000-0 fax: +49 (0)511/40 000-40 e-mail: sales@ist1.De manual revision: 1.4 date: 2006-01-09 for further information regarding our products please visit us at www.Ssv-embe...
Igw/400-uart – content s s v e m b e d d e d s y s t e m s 2 content 1 introduction...............................................................................................................3 1.1 block diagram .........................................................................................
Igw/400-uart – introduction s s v e m b e d d e d s y s t e m s 3 1 introduction the wlan device server igw/400-uart integrates typical measurement and control interfaces into an ieee 802.11b/g-compatible wlan/wifi network. This very compact system acts as small, easy to use interface converter, whi...
Igw/400-uart – overview s s v e m b e d d e d s y s t e m s 4 2 overview figure 2: overview igw/400-uart.
Igw/400-uart – components s s v e m b e d d e d s y s t e m s 5 3 components this chapter describes the components of the igw/400-uart shown in chapter 2 and gives a short overview about their respective functions. 3.1 14-pin environment interface connector (ei/o) the environment interface connector...
Igw/400-uart – mechanical dimensions s s v e m b e d d e d s y s t e m s 6 4 mechanical dimensions all length dimensions have a tolerance of 0.5 mm. Figure 3: mechanical dimensions of igw/400-uart.
Igw/400-uart – mechanical dimensions s s v e m b e d d e d s y s t e m s 7 4.1 mechanical dimensions with din-rail mounting set all length dimensions have a tolerance of 0.5 mm. Figure 4: mechanical dimensions of igw/400-uart with din-rail mounting set.
Igw/400-uart – mechanical dimensions s s v e m b e d d e d s y s t e m s 8 4.2 mechanical dimensions with wall mounting set all length dimensions have a tolerance of 0.5 mm. Figure 5: mechanical dimensions with wall mounting set.
Igw/400-uart – mechanical dimensions s s v e m b e d d e d s y s t e m s 9 4.3 drilling template for wall mounting set all length dimensions have a tolerance of 0.5 mm. Figure 6: drilling template for wall mounting set.
Igw/400-uart – pin assignments s s v e m b e d d e d s y s t e m s 10 5 pin assignments 5.1 14-pin environment interface connector (ei/o) pin name function 1 vin 6 - 30 vdc power input 2 gnd ground 3 dcd2 (rs232) uart2 rs232 serial port, dcd2 pin 4 rxd2 (rs232) uart2 rs232 serial port, rxd2 pin 5 tx...
Igw/400-uart – contact s s v e m b e d d e d s y s t e m s 11 contact ssv embedded systems heisterbergallee 72 d-30453 hannover / germany phone: +49 (0)511/40 000-0 fax: +49 (0)511/40 000-40 e-mail: sales@ist1.De internet: www.Ssv-embedded.De document history revision date remarks name 1.0 2005-04-0...
