Mgw/920 smart metering gateway first steps ssv embedded systems heisterbergallee 72 d-30453 hannover phone: +49 (0)511/40 000-0 fax: +49 (0)511/40 000-40 e-mail: sales@ist1.De manual revision: 1.1 date: 2008-05-08 for further information regarding our products please visit us at www.Ssv-embedded.De.
Mgw/920 smart metering gateway- first steps 2 m a n u a l r e v i s i o n 1 . 1 content 1 introduction ...............................................................................................................3 1.1 safety guidelines..................................................................
Mgw/920 smart metering gateway- first steps m a n u a l r e v i s i o n 1 . 1 3 1 introduction the default configuration of an mgw/920 smart metering gateway contains one 10/100 mbps ethernet lan interface and one m-bus master interface for up to ten external m-bus meters. For using the mgw/920 you ...
Mgw/920 smart metering gateway- first steps 4 m a n u a l r e v i s i o n 1 . 1 1.3 application environment figure 1 shows the typical application environment for the mgw/920 smart metering gateway. One side is connected over the m-bus (metering bus) to gas, electricity, water or other types of cons...
Mgw/920 smart metering gateway- first steps m a n u a l r e v i s i o n 1 . 1 5 1.4 features and technical data • mgw/920 with dil/netpc dnp/9200 @ 180 mhz • 1x real time clock (rtc) with battery backup • 1x m-bus master interface (rj12) • 1x 10/100 mbps ethernet lan interface (rj45) • 6x status led...
Mgw/920 smart metering gateway- first steps 6 m a n u a l r e v i s i o n 1 . 1 2 overview fig. 2: overview mgw/920
Mgw/920 smart metering gateway- first steps m a n u a l r e v i s i o n 1 . 1 7 3 getting started 3.1 ethernet link between mgw/920 and pc setup the ethernet link between the ethernet connector of the mgw/920 and your pc. Use an ethernet cross-over cable or a router-based infrastructure for the ethe...
Mgw/920 smart metering gateway- first steps 8 m a n u a l r e v i s i o n 1 . 1 3.2 connecting power supply and power-up the mgw/920 connect the 12 vdc power supply with the 5.5 mm x 2.5 mm barrel plug to the mgw/920. Fig. 5: power supply for the mgw/920 caution: providing the mgw/920 with a voltage...
Mgw/920 smart metering gateway- first steps m a n u a l r e v i s i o n 1 . 1 9 3.3 checking ip address of pc make sure that your pc is using the right ip address for the ethernet-based tcp/ip com- munication with the mgw/920. Use 192.168.0.1 or 192.168.0.254 for your pc and 192.168.0.126 for the mg...
Mgw/920 smart metering gateway- first steps 10 m a n u a l r e v i s i o n 1 . 1 3.4 checking ethernet-based tcp/ip communication check the ethernet-based tcp/ip communication between the mgw/920 and the pc with a simple ping command. Fig. 8: windows-pc tcp/ip communication check with ping first che...
Mgw/920 smart metering gateway- first steps m a n u a l r e v i s i o n 1 . 1 11 3.5 changing ex factory ip address (ipbynet) the ex factory value for the default ip address is 192.168.0.126 . The network mask for this address is 255.255.255.0 . You can change the ip address and the network mask ove...
Mgw/920 smart metering gateway- first steps 12 m a n u a l r e v i s i o n 1 . 1 the first command line creates an arp table entry for the ip address 192.168.0.10 and the mac address 02-80-ad-20-d3-7f . The second command line sends an icmp echo request to the device with the mac address 02-80-ad-20...
Mgw/920 smart metering gateway- first steps m a n u a l r e v i s i o n 1 . 1 13 4 mechanical dimensions all length dimensions have a tolerance of 0.5 mm. The keyhole drillings are suitable for m4 screws. Fig. 11: mechanical dimensions of the mgw/920
Mgw/920 smart metering gateway- first steps 14 m a n u a l r e v i s i o n 1 . 1 5 pinouts 5.1 ethernet interface (rj45) pin name function 1 tx+ 10/100 mbps lan, tx+ pin 2 tx- 10/100 mbps lan, tx- pin 3 rx+ 10/100 mbps lan, rx+ pin 4 --- not connected 5 --- not connected 6 rx- 10/100 mbps lan, rx- p...
Mgw/920 smart metering gateway- first steps m a n u a l r e v i s i o n 1 . 1 15 6 helpful literature • dil/netpc dnp/9200 hardware reference • mb/920-e2m base board hardware reference contact ssv software systems heisterbergallee 72 d-30453 hannover / germany phone: +49 (0)511/40 000-0 fax: +49 (0)...
