March 2012 doc id 022703 rev 2 1/36 um1509 user manual evalsp320splc evaluation board for spear320s introduction this user manual describes the implementation of the evalsp320splc evaluation board (order code: evalsp320splc). This evaluation board can be used to evaluate the spear320s microprocessor...
Contents um1509 2/36 doc id 022703 rev 2 contents 1 application board features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.1 application board block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 application board layout . . . . . . . . . ...
Um1509 contents doc id 022703 rev 2 3/36 5.8 general-purpose gpio and i2c connector (cn10) . . . . . . . . . . . . . . . . . 20 5.9 rs-485 db9 socket and header connector (cn11 and cn12) . . . . . . . . 21 5.10 rs-232/uart0 db9 plug connector (cn13) . . . . . . . . . . . . . . . . . . . . . . 21 5.1...
List of figures um1509 4/36 doc id 022703 rev 2 list of figures figure 1. Spear320s mii mode application board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 figure 2. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Um1509 list of tables doc id 022703 rev 2 5/36 list of tables table 1. Mii addresses of the ethernet phys (u5 and u6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 2. Default configuration of the ethernet phys (u5 and u6) . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Application board features um1509 6/36 doc id 022703 rev 2 1 application board features ● 2 x ethernet rj-45 connectors (st802rt1a) ● 2 x can db9 plug connectors ● 3 x rs-232 db9 plug connectors (st3232ebtr) ● 1 x rs-485 db9 socket connector (st3485ebdr) ● digital input connectors (parallel and seri...
Um1509 application board layout doc id 022703 rev 2 7/36 2 application board layout figure 3. Application board layout note: evaluation boards for spear320s may use the same pcb as spear320 devices. This is why the label "spear320 cpu board" can be found on some spear320s boards. U9 tem perature sen...
Getting started um1509 8/36 doc id 022703 rev 2 3 getting started 3.1 unpacking warning: this board contains static sensitive devices. The evalsp320splc evaluation board is shipped in protective anti-static packaging. Do not submit the board to high electrostatic potentials, and follow good practice...
Um1509 configuration doc id 022703 rev 2 9/36 4 configuration 4.1 ethernet there are two ethernet phys (u5 and u6) available on the board that are connected through the media independent interfaces (mii) to the ethernet macs on the cpu board processor. By default the mii addresses of the ethernet ph...
Configuration um1509 10/36 doc id 022703 rev 2 for the two ethernet phys (u5 and u6 in mii mode) to function correctly, it is necessary to clock them using a 25-mhz clock. There are two ways to deliver the 25-mhz clock signal to the devices. 4.2 digital input / digital output connectors the digital ...
Um1509 configuration doc id 022703 rev 2 11/36 figure 5. 8/16 input channel current limiter based on sclt3-8, steval-ifp007v1 4.3 controller–area network bus the evalsp320splc evaluation board supports two channels of can2.0a/b compliant controller–area network (can) bus communication based on a 3.3...
Configuration um1509 12/36 doc id 022703 rev 2 4.4 rs-232 and rs-485 transceivers there are three rs-232 db9 plug connectors and one rs-485 db9 socket connector with a profibus dp compliant pinout available on the board. Uart0 features the full modem control signals and fully utilizes u10, u12 and p...
Um1509 configuration doc id 022703 rev 2 13/36 caution: do not fit the jumpers when the u10 rs-232 transceiver is soldered on the evaluation board. 4.5 power supply there are two options to supply the evalsp320splc evaluation board: 1. Connecting the +5 v voltage adapter (delivered in the evalsp320s...
Configuration um1509 14/36 doc id 022703 rev 2 4.6 temperature sensor there is an analog temperature sensor (stlm20) available on the board that is connected to the analog input ain0 of the cpu board. It is possible to disconnect it by removing jumper jp10. The jumper is loaded by default. 4.7 poten...
Um1509 configuration doc id 022703 rev 2 15/36 the following relation between the pins should be guaranteed in the application: 4.9 general-purpose buttons (b1 and b2) there are two general-purpose buttons (b1 and b2) available on the top side of the board. Button b1 can be disconnected from the inp...
Configuration um1509 16/36 doc id 022703 rev 2 4.11 reset button a manual reset button (b3) is available on the board's top side. It resets the microprocessor on the core board. It can be disconnected from the input reset signal of the core board by soldering out resistor r65. In order to perform a ...
Um1509 connectors doc id 022703 rev 2 17/36 5 connectors 5.1 can db9 plug connectors (cn1 and cn2) figure 6. Can db9 plug connectors pinout 5.2 digital input serial connector (cn3) this connector enables connection of industrial output card steval-ifp007v1. Figure 7. Digital input serial connector p...
Connectors um1509 18/36 doc id 022703 rev 2 5.3 digital output serial connector (cn4) this connector enables connection of industrial output card steval-ifp009v1. Figure 8. Digital output serial connector pinout 5.4 digital input parallel connector (cn5) this connector enables connection of industri...
Um1509 connectors doc id 022703 rev 2 19/36 5.5 digital output parallel connector (cn6) this connector enables connection of industrial output cards: steval-ifp002v1, steval- ifp001v1, steval-ifp006v1. Figure 10. Digital output parallel connector (cn6) pinout 5.6 ethernet rj-45 connectors (cn7 and c...
Connectors um1509 20/36 doc id 022703 rev 2 5.7 general-purpose adc connector (cn9) figure 12. General-purpose adc connector (cn9) pinout 5.8 general-purpose gpio and i 2 c connector (cn10) figure 13. General-purpose gpio and i 2 c connector (cn10) pinout table 17. General-purpose adc connector (cn9...
Um1509 connectors doc id 022703 rev 2 21/36 5.9 rs-485 db9 socket and header connector (cn11 and cn12) figure 14. Rs-485 db9 socket connector cn11 pinout figure 15. Rs-485 header connector cn12 pinout 5.10 rs-232/uart0 db9 plug connector (cn13) figure 16. Rs-232/uart0 db9 plug connector (cn13) pinou...
Connectors um1509 22/36 doc id 022703 rev 2 5.11 rs-232/uart2 db9 plug connector (cn14) figure 17. Rs-232/uart2 db9 plug connector (cn14) pinout 5.12 rs-232/uart1 db9 plug connector (cn15) figure 18. Rs-232/uart1 db9 plug connector (cn15) pinout table 21. Rs-232/uart0 db9 plug connector (cn13) descr...
Um1509 connectors doc id 022703 rev 2 23/36 5.13 microsd card connector (cn16) see also: microsd card on page 16 . Figure 19. Microsd card connector (cn16) pinout table 23. Rs-232/uart1 db9 plug connector (cn15) description pin description pin description 1 nc (r81 can interconnect this pin with pin...
Connectors um1509 24/36 doc id 022703 rev 2 5.14 power supply connectors (cn17 and cn18) 5.15 spear320s cpu board connectors (j1 and j2) there are two 86-pin connectors (j1 and j2) which are used to extend the evaluation board with the spear320s cpu board. Figure 22. 86-pin connectors (j1 and j2) pi...
Um1509 connectors doc id 022703 rev 2 25/36 3 nc 32 mii1_col 61 mii1_crs 4 +5.0 v 33 mii1_rxer 62 nc 5 nc 34 ssp_clk 63 mii1_mdio 6 +5.0 v 35 mii1_mdc 64 nc 7 nc 36 ssp_miso 65 ssp_ss0 8 +5.0 v 37 mii1_rxdv 66 nc 9 uart0_tx 38 i2c_scl / pl_gpio4 67 uart2_tx 10 sdat1 / microsd card data 1 39 mii1_rxd...
Connectors um1509 26/36 doc id 022703 rev 2 note: dido stands for digital input / digital output. 4 pl_gpio63 33 sdcd / microsd card detect 62 gnd 5 pl_gpio56 34 mii2_rxd0 63 mii2_txen 6 sdat3 / microsd card data 3 35 dido54 / pl_gpio54 64 ain5 7 led3 / pl_gpio58 36 mii2_txd1 65 mii2_txd3 8 pl_gpio5...
Um1509 application board bill of materials doc id 022703 rev 2 27/36 appendix a application board bill of materials table 29. List of components designator qty. Description value order number not assembled b1, b2, b3 3 se push button b3s-1000 c1, c3, c5, c6, c7, c8, c9, c10, c11, c13, c15, c16, c19,...
Application board bill of materials um1509 28/36 doc id 022703 rev 2 cn16 1 microsd card socket pjs008-2003 yamaichi: pjs008- 2003 (www.Manudax.Fr) cn17 1 2-pin terminal block, 5.08 mm pitch terminal block cn18 1 input power connector, 4.4 v- 36 v dc10a socket d1, d2 and d3 3 schottky diode stps3l40...
Um1509 application board bill of materials doc id 022703 rev 2 29/36 r9, r23, r33, r47 and r99 5 resistor (0603) 1.2 k Ω r14 and r39 2 resistor (0603) 5.6 k Ω r15 and r40 2 resistor (0603) 91 k Ω r21, r26, r48 and r51 4 resistor (0603) 2 k Ω r24, r25, r49, r50 and r72 5 resistor (0603) 220 Ω r72 r27...
License agreements um1509 30/36 doc id 022703 rev 2 appendix b license agreements demo product license agreement by using this demonstration product, you are agreeing to be bound by the terms and conditions of this agreement. Do not use this demonstration product until you have read and agreed to th...
Um1509 license agreements doc id 022703 rev 2 31/36 aggregate liability to you or any third party under this agreement for any cause action, whether based on contract, tort, or any other legal theory, relating to or in connection with the demo product, the documentation or this agreement shall excee...
License agreements um1509 32/36 doc id 022703 rev 2 software license agreement this software license agreement ("agreement") is displayed for you to read prior to downloading and using the licensed software. If you choose not to agree with these provisions, do not download or install the enclosed li...
Um1509 license agreements doc id 022703 rev 2 33/36 you will inform all your employees who are given access to the source code of the licensed software of the foregoing requirements, and you will take all reasonable precautions to ensure and monitor their compliance with such requirements. You agree...
License agreements um1509 34/36 doc id 022703 rev 2 severability if any provision of this agreement is or becomes, at any time or for any reason, unenforceable or invalid, no other provision of this agreement shall be affected thereby, and the remaining provisions of this agreement shall continue wi...
Um1509 revision history doc id 022703 rev 2 35/36 revision history table 30. Document revision history date revision changes 01-mar-2012 1 initial release. 21-mar-2012 2 modified introduction to indicate that the cpu board is ordered separately and removed cpu board hardware description sections..
Um1509 36/36 doc id 022703 rev 2 please read carefully: information in this document is provided solely in connection with st products. Stmicroelectronics nv and its subsidiaries (“st”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products ...
