Surveon EMR2000 Quick Installation Manual
Only qualified service personnel should install and service this product in order to avoid risk of injury from
electrical shock and energy hazard.
Observe all ESD (Electro-static Discharge) procedures during installation to avoid damage to the recorder
and its components.
Warning!
User-provide Items
/4
QUICK INSTALLATION GUIDE
Installation
© by Surveon Technology, Inc. All rights reserved.
EMR Desktop Series
Rear View
1
Power Socket
2
e-SATA Port x1
3
USB Port x4
HDMI Port
LAN Port x2
Restore Button
USB Port x2
Safety Switch
Audio Ports
VGA Port
Kensington Lock-hole
COM Port
12V DC Power Port
EMR2000 Series
EMR5000 Series
EMR8000 Series
2
3
4
5
6
2
3
4
3
4
1
5
5
6
6
9
10
11
12
13
7
8
8
8
1
Hardware Overview
Front View
1
Note: The function of Video Back Up Button is reserved.
EMR5000 Series
EMR8000 Series
1
LCD Display
2
Enter Switch
3
Select Switch
LED Indicators
Power Switch
4
5
6
7
Front USB Connector
Video Back Up Button
EMR2000 Series
4
5
1
2
3
4 5
1
2 3
4
5
6
6
6
7
2
System Connections
3
●
●
Insert the LAN Cable to the LAN Port to a local network where your IP Camera reside.
(Connection to analog cameras is also available via an IP encoder).
●
Connect an external monitor capable of 32 bit or higher color quality to the VGA port to view the
Milestone XProtect interface.
Insert mouse, keyboard to the USB for installing Milestone XProtect Server on the EMR system.
Connect cables to the rear panel ports as follows:
Note: Shaded areas are optional devices.
Powering up E MR
4
LED Indicators
LCD Display
Power Switch
1. Attach the power cable to the power socket on the rear panel.
2. (EMR8000 Series) Make sure the safety switch on the rear panel
is switched to the “-” side, which means that it is turned on.
3.
4. See if the system LED is blinking, which means that the system
is starting up.
5. See if the network LED has turned green, which indicates that
the power is on and network is connected.
6. See if the HDD LED is on, which means that the hard drive can
be accessed.
7.
The Server name and the IP address will
be shown on the LCD screen.
Press the power switch.
(EMR5000/8000 series)
Q M E 2 5 8 0 A U R 1 0
1/4
Adding Hard Drives (Optional)
Hard Drive Installation Prerequisites
Purchase hard drives having the same capacity and using same interface with the pre-installed ones.
Inserting Hard Drive into Drive Tray
1. Open the front panel of the EMR system.
2. Press the release button (indicated by the blue arrow)
on the bezel, the bezel panel should open automatically
and gently pull out the hard drive tray.
3. Place the hard drive into the drive tray.
Make sure the hard drive’s interface
connector is the open side of the drive
tray and its label side facing up. Adjust
the drive’s location until the mounting
holes in the drive tray are aligned with
those on the hard drive. Secure the drive
with four supplied flat head screws
.
4. With the tray bezel open, insert the hard drive and
tray into the system enclosure.
5. Close the tray bezel.
6. Use the small flat blade screw driver to turn the bezel lock
from the unlock to lock position.
7. Repeat above steps to install other hard drives.
8. Close the system front panel when you are done installing hard drives.
Password:
●
Quick Installation Guide x1
●
Product DVD x1 (including manuals)
●
Power Cord x1
Accessories
●
HDD Screw x20 (EMR2000 series)
●
HDD Screw x40 (EMR5000/8000 series)
●
●
USB compatible Keyboard and Mouse
LAN Cable
●
●
●
Monitor
●
(Optional) Hard Drives for extra storage space
PC(s) with Windows XP (or above) Used as Remote
Milestone Smart Client Management Center
USB Drive Used for Installing Milestone Smart Client on
remote PC(s)
4
5
6
7
8
9
10
11
12
13
Flat blade
Screwdriver
Philips
Screwdriver
●
●
Hard drives are pre-installed in the EMR series. Users can also add supplementary hard drives and do RAID
configurations themselves. Please refer to the following table for more details.
IP Encoder
Analog Camera(s)
Remote Milestone XProtect Smart
Client Management Center
IP Camera(s)
Monitor
Internet
SELECT
ENTER
SMR Pro
Ethernet Connection
USB Connection
Video/Monitor Connection
Model
EMR2000
EMR5000
EMR8000
Numbers of Pre-installed
Hard Drives
1 HDD
2 HDD
1 HDD
3 HDD
2 HDD
Space for Additional
Hard Drives
RAID Options for
Additional Hard Drives
Default RAID
Configuration
N/A
N/A
N/A
RAID5
RAID1
1 HDD
0 HDD
4 HDD
2 HDD
6 HDD
N/A
N/A
RAID0, 1 or above
RAID0, 1
RAID0, 1 or above
.
Note:
(1) You should go to Windows Disk Management to allocate and format the logical drives
(set the block size as 64K). You can choose to do this before or after the RAID configration
is done. (2) Please refer to Advanced RAID Configuration section in the EMR Series User
Manual for more details.