Sutherland MCX Owner's Manual - Load Settings
of
12
10
Load Settings
Cartridge loading is determined by the resis-
tor value installed in the LOADING resistor
socket.
Dale/Vishay RN65-style resistors are included
with the following values.
47.5k for 475 Ohm loading
30k for
300 Ohm loading
20k for
200 Ohm loading
10k for
100 Ohm loading
5k for
50 Ohm loading
Your MCX ships with loading set to 200
Ohms.
NOTE: the loading resistors are positioned at
the secondary of the step-up transformer.
The actual value of loading applied to the
cartridge will be the resistor’s value divided
by 100.