Suttle SAM-SW5U User Manual - 1. Introduction
SOHO Access
TM
Module
User Guide
1. Introduction
The 5 port 10/100BASE-TX Switch is compact and attractively designed for
use within Suttle’s
SOHO Access
TM
Enclosure. They are ideal solution for
small office or home office network user. The Switches provide wire-speed,
Fast Ethernet switching function that allows high-performance, low-cost
connection.
The 5 port 10/100BASE-TX Switch will automatically detect the speed of the
device that you plug into it to allow you to connect both 10 and 100Mbps
device. They feature a store-and forward switching and it can auto-learn and
store source address.
Features
•
Conforms to IEEE 802.3, 802.3u and 802.3x standard
•
5 10/100Mbase-TX Switch
•
Auto MDI/MDI-X on all ports
•
N-way auto-negotiation
•
IEEE802.3x Flow control
o
Flow control for full duplex
o
Backpressure for half duplex
•
Store-and-forward switching architecture
•
1 Mbits memory buffer
•
1K MAC address table
Module Installation
Align the mounting pins with the grid holes on the back of the enclosure.
With the mounting pin plungers in the “out” position, press the unit into the
grid in the desired location and secure by pushing the plungers in.