Sutton's Locomotive Workshop British Railways Sulzer Type 2 Operating Manual - page 26
13. Spare parts and enhancements
We hold a stock of spares to cover for possible breakages, loss or worn-out
parts. Requests for spares should be directed to: slw@railexclusive.com
Alternatively, call us on 01780 470086, or write to the address given opposite.
Where damage has been incurred, we will supply the new replacement part
free of charge on receipt of the original part. Other parts will be made available
for a small charge including postage. With over 350 components in each
model it is not practical to list each and every item. If you need help identifying
parts or having trouble with disassembly please do not hesitate to contact us.
The following enhancement packs are made available for sale separately:
SOUND UPGRADE KIT: To convert the standard DC (analogue) model to full DCC
sound specification. Comprises a MX645 PluX22e sound decoder pre-loaded with
our bespoke Class 24 sound project and two SLW ‘Dumbo’ smartphone speakers
with wired 2-way JST sockets (for direct connection to the PCB mounted plugs).
Note: This kit is not compatible with any other model.
£100 + free (tracked delivery)
P&P to existing customers of analogue Class 24s only.
SUPER-CAPACITOR UPGRADE KIT: To upgrade the DCC sound model to enhanced
stay-alive capability of approximately 1.5 seconds to avoid sound drop-outs, light
flicker and stalling on less than perfect trackwork. Comprises SC68 6800μf compact
super-capacitor. Pre-wired for installation. Requires soldering.
£30 + free P&P.
HALL DEVICE KIT: To magnetically trigger further sound function via the decoder’s
switch input connections. Comprises a Hall device, two 6mm diameter neodymium
magnets and a 200mm length of colour-coded wiring terminating in a 3-way JST
socket (for direct connection to PCB mounted plug). Requires soldering.
£10 + free
P&P to existing customers only.
Replacement WHEELSETS: A pack of four drop-in wheelsets for ‘OO’, ‘EM’ or ‘P4’
gauge (please specify at time of ordering). Steel 2mm diameter axles fitted with
RP25-110 or ‘P4’ profile insulated wheels, brass bushed bearings and toothed gear
wheel for SLW gearbox.
£20 + f P&P
TYNE DOCK DETAIL KIT: Plastic parts to convert water tank (boiler)-fitted standard
release model to Tyne Dock specification. Comprises a pair of high and low level air
pipes for each end, two battery boxes without location pins and battery box support
moulding.
£7.50 + free P&P
ETCHED WORKSPLATES: A pair of painted and polished photo-etched stainless steel
worksplates (and shedplates where appropriate) for placing over printed detail.
£1.00 + free P&P or, FOC to existing customers of Class 24 models, on receipt of SSAE.
14. Warranty and statutory information
SLW/RAIL EXCLUSIVE guarantees (to the original purchaser) this model locomotive
to be free from defective materials or workmanship during a six month period from
date of purchase. Under these terms, the product will be repaired or replaced, at our
discretion, without charge for parts or labour, when returned. This guarantee does
not cover defects caused by damage or misuse, abnormal service or handling,
including incorrect maintenance, nor any product whose exterior has been damaged
or defaced, nor to any product altered or repaired by other than SLW/RE.
This guarantee does not affect your statutory rights as a purchaser under the ‘Sale
of Goods Act’. SLW/RE cannot be held responsible for any consequential damages
arising from this product. This shall be the exclusive written guarantee to the original
purchaser and neither this guarantee nor any other guarantee, expressed or implied,
shall extend beyond the period of time given above.
We will endeavour to provide customer support and goodwill for as long as possible
beyond the initial period, and do everything within our power to resolve any issues
and ensure this model provides you with years of reliable service.
Contact address:
Sutton’s Locomotive Workshop, Rail Exclusive,
20 Park Street, King’s Cliffe, Northamptonshire, PE8 6XN
Great Britain.
Telephone, WEBSITE & e-mail address:
Tel: 01780 470086 Web: www.sulzertype2.com
E-mail: slw@railexclusive.com
Safety:
This model is not a toy. It is not for use by children (under 14 years of age) as small
parts may become detached and present a choking hazard. Metal parts may have
sharp edges and should be handled with care. Retain packaging for future reference.
Recycling:
Metal box is widely recycled. Model contains electronic components that should be
disposed of outside of normal waste arrangements (WEEE directive).
Researched & designed in Great Britain.
Manufactured & assembled in China.
SLW Class 24 Operating Manual
Page 51
Page 50
SLW Class 24 Operating Manual