En suunto combos and mechanical instruments user’s guide • combo consoles • console compasses cb-71 and cb-71/ds • depth gauge sm-16 • pressure gauge sm-26 and sm-36.
3 general instructions suunto diving instruments are constructed of high quality materials and are designed for normal recreational use. The product should provide many years of reliable service if the user observes the necessary precautions in the following directions. Suunto combo consoles introdu...
4 assembling the combo modules the combo modules are to be assembled in the order described by the illustration below: 1. Cb-one module front cover with sm-26/36 pressure gauge in place (see section cb-one module assembly) 2. Cb-in line module front cover 3. Cb-end piece or cb-71 compass (optional) ...
5 cb-one module assembly the cb-one module is designed to fi t the suunto sm-26/36 analog pressure gauges. Before assembling the cb-one module the hose cover needs to be fi tted on the pressure hose. The hose cover ensures that the sm-26/36 pressure gauge fi ts properly on the cb-one module. If the ...
6 cb-one module assembly when using the suunto quick release if the suunto quick release (qr) is used the hose cover should be attached on the high pressure hose below the female end of the qr. The male part is attached to the pressure gauge which is then fi tted onto the cb-one front cover accordin...
7 suunto console compasses cb-71/sk-7/std and cb-71/sk-7/ds the high-quality, liquid-fi lled suunto diving compasses are durable, reliable and easy to use. The cb-71/sk-7 is available in two versions: the cb-71/sk-7/std for attachment on top of the combo modules or the cobra dive computer, and the c...
8 • in shallow water, the sun’s direction can be seen from shadows on the bottom, or by looking towards the surface • swimming in a straight line along the bottom is greatly facilitated if you can line up three distinctive objects in your line of vision. As you reach the fi rst one, line up a new on...
9 before usage depth gauge: before diving, check the position of the depth indicating pointer. Atmospheric conditions (altitude, temperature) may cause the point to not indicate zero. If this is the case, turn the ad- justing screw located at the right side of the gauge to align the pointer to zero....
10 caution! Do not attempt to disassemble the gauges. Special tools and training are required to perform the adequate service. The instruments must be serviced by an authorized dealer every second year or after 200 dives (whichever comes fi rst). Operating and storage temperatures sm-16 operating te...
Printed in finland 09.2006 / esa print oy / 161188 copyright this publication and its contents are proprietary to suunto oy. Suunto, wristop computer, suunto combo, replacing luck and their logos are registered or unregistered trademarks of suunto oy. All rights reserved. While we have taken great c...
Www.Suunto.Com made in finland © suunto oy 11 / 2005, 09 / 2006.
