Suvil KEiPad 2 BT User Manual - page 8
| KEiPad 2 BT |
User Guide
8
Service, input the stochastic pass key, the
system will auto install the HID facility. After
that you can use your Bluetooth Keyboard at
ease.
FAQ
If unable to connect the Bluetooth Keyboard
to the computer, or the Keyboard work
unconventionally, please try the steps
below:
1. Before you use your Bluetooth Keyboard,
please make sure you have done the
Bluetooth Dongle installation procedure, and
the Bluetooth facility is turned on.
2. Make sure that the Computer is
connected to the Bluetooth Keyboard. If
they are matched to each other before, then
under the Standby State, just click the “
enter ” key of the keyboard.
3. Make sure that the keyboard is within the
effective range---10M.
4. Make sure that there’s no change of the
Bluetooth facility. If anything changed,
please kind rematch.
5. If your Bluetooth facility is connected
to other Bluetooth products, please kindly
confirm that the
speed of the Bluetooth facility is enough.
6. Please kindly check the batteries. If they
are short of power, replace them for new
ones.