1. DL manuals
  2. Suzuki
  3. Boating Equipment
  4. 86W41
  5. Installation Instructions

Suzuki 86W41 Installation Instructions

Summary of 86W41

  • Page 1

    Ref. Indicates potential hazard that could result in vehicle damage. Important please read this manual and follow its instructions carefully. To emphasize special information, the symbol and the words warning, caution and note have special meanings. Pay special attention to the messages highlighted ...

  • Page 2

    The dual engine synchronizer is designed to indicate engine synchronization extremely accurately when the speeds of the two engines are compared to each other. Engine synchronization may be difficult at idle speeds. For proper operation, both engines must be of the same type, have the same number of...

  • Page 3

    Trouble shooting harness diagram trouble inspection diagnosis action gauge sticks gauge inoperative a. Backclamp may be too tight. A. 1. Slightly loosen nuts holding backclamp. Check operation. 1. 1. If gauge works and is not loose in panel, continue using gauge. 2. If gauge continues to stick, repl...

  • Page 4

    Calibration gauge is pegged a. 1. 1. The synchronizer is in the wrong switch position. Check calibration. (see the calibration section at end of this manual.) the synchronizer reads hi or low. 2. The synchronizer is not calibrated. Gauge is erratic a. 1. 1. Check for insulation that may have been pu...